Thermodynamically stable vesicle formation from glycolipid biosurfactant sponge phase

Thermodynamically stable vesicle (L(alpha1)) formation from glycolipid biosurfactant sponge phase (L(3)) and its mechanism were investigated using a "natural" biocompatible mannosyl-erythritol lipid-A (MEL-A)/L-alpha-dilauroylphosphatidylcholine (DLPC) mixture by varying the composition. The trapping efficiency for calcein and turbidity measurements clearly indicated the existence of three regions: while the trapping efficiencies of the mixed MEL-A/DLPC assemblies at the compositions with X(DLPC)< or =0.1 or X(DLPC)> or =0.8 were almost zero, the mixed assemblies at the compositions with 0.1 or =0.8 were multilamellar vesicles (L(alpha)) with diameter from 2 to 10 microm. Meanwhile, dynamic light scattering (DLS) measurement revealed that the average size of the vesicles at the composition of X(DLPC)=0.3 was 633.2 nm, which is remarkably small compared to other compositions. Moreover, the mixed vesicle solution at the composition of X(DLPC)=0.3 was slightly bluish and turbid and kept its dispersion stability at 25 degrees C for more than 3 months, indicating the formation of a thermodynamically stable vesicle (L(alpha1)). These results exhibited the formation of a thermodynamically stable vesicle (L(alpha1)) with a high dispersibility from the MEL-A/DLPC mixture. The asymmetric distribution of MEL-A and DLPC in the two vesicle monolayers caused by the difference in geometrical structures is very likely to have changed their self-assembled structure from a sponge phase (L(3)) to a thermodynamically stable vesicle (L(alpha1)).     

Copolymerization of 1,6-anhydro-ß-D-galactopyranose and 1,6-anhydro-ß-D-mannopyranose derivatives

1,6-Anhydro-2,3,4-tri-O-(p-methylbenzyl)-ß-D -galactopyranose (TXGal,M₁) has been copolymerized with 1,6-anhydro-2,3,4-tri-O-benzyl-ß-D -mannopyranose (TBMan,M₂), the products characterized by NMR, specific rotation, and viscosity, and the reactivity ratios calculated. The reactivity ratios r₁ = 0.37 ± 0.15 and r₂ = 38 ± 4 indicate that the anhydromannose derivative is about 100 times as reactive as that of anhydrogalactose. A comparison of glucose, mannose, and galactose copolymerizations suggests that the reactivity differences of the three propagating cations are comparatively small and the reactivity differences of the monomers large. This result is consistent with a mechanism proposed earlier. Methyl substitution on the aromatic rings of the p-xylyl groups inhibits the initiation process significantly relative to benzyl, but propagation only slightly.     

A gravimetric method for the determination of oxygen in uranium oxides and ternary uranium oxides by addition of alkaline earth compounds

A simple gravimetric determination of oxygen in uranium oxides and ternary uranium oxides is described. In alkaline earth uranates which are formed by heating in air at 800–1100°C, uranium is in the hexavalent state over certain continuous ranges of alkaline earth-to-uranium ratios. Thus, if an alkaline earth uranate or a compound containing an alkaline earth element, e.g. MgO, is mixed with the oxide sample and heated in air under suitable conditions, oxygen can be determined from the weight change before and after the reaction. The standard deviation of the O:U ratio for a UO_2+x test sample is ±0.0008–0.001, if a correction is applied for atmospheric moisture absorbed during mixing.     

Electrophoretic mobility of the polymer-like micelles of tetradecyldimethylamine oxide hemihydrochloride

Effects of the surfactant concentration C_d and the NaCl concentration C_s on the electrophoretic mobilities U of the well-characterized polymer-like micelles have been investigated by the electrophoretic light scattering, using tetradecyldimethylamine oxide hemihydrochloride (C14DMAO·1/2HCl). At the high ionic strength of 0.1 mol kg⁻¹ NaCl, the electrophoretic mobilities were independent of C_d (5 mM < C_d < 100 mM), despite the concentration-dependent micelle growth of the polymer-like micelles. This suggests that the electrophoretic mobility of the polymer-like micelle at high ionic strengths is independent of the contour length (i.e., the molecular weight), as found on linear polyelectrolytes. Somewhat surprisingly, the entanglements of the polymer-like micelles gave small effect on the electrophoretic mobilities in the examined range of the surfactant concentration above an overlap concentration. The mobilities of the polymer-like micelle decreased with √C_s in a single exponential manner in the range of C_s from 0.02 to 0.3 mol kg⁻¹. It is suggested that the cylinder model can be applied to the electrophoretic mobilities of the polymer-like micelles at high ionic strengths (i.e. a free-draining behavior), since the persistence length of the polymer-like micelle (20 nm) is much larger than the Debye length at high ionic strength.     

Ion-exclusion chromatography with conductimetric detection of aliphatic carboxylic acids on a weakly acidic cation-exchange resin by elution with benzoic acid-beta-cyclodextrin

In this study, an aqueous solution consisting of benzoic acid with low background conductivity and beta-cyclodextrin (beta-CD) of hydrophilic nature and the inclusion effect to benzoic acid were used as eluent for the ion-exclusion chromatographic separation of aliphatic carboxylic acids with different pKa values and hydrophobicity on a polymethacrylate-based weakly acidic cation-exchange resin in the H+ form. With increasing concentration of beta-cyclodextrin in the eluent, the retention times of the carboxylic acids decreased due to the increased hydrophilicity of the polymethacrylate-based cation-exchange resin surface from the adsorption of OH groups of beta-cyclodextrin. Moreover, the eluent background conductivity decreased with increasing concentration of beta-cyclodextrin in 1 mM benzoic acid, which could result in higher sensitivity for conductimetric detection. The ion-exclusion chromatographic separation of carboxylic acids with high resolution and sensitivity was accomplished successfully by elution with a 1 mM benzoic acid-10 mM cyclodextrin solution without chemical suppression.     

Enantioselective reduction of ketones with optically active 2,2′-diamino-6,6′-dimethylbiphenyl-lithium aluminum hydride complex

Enantioselective reductions of prociral ketones with chiral hydride reagent prepared from optically active 2,2′-diamino-6,6′-dimethylbiphenyl and lithium aluminum hydride were accomplished in O.Y. more than 50%.     

Mass spectra of π-cyclopentadienyl-diene cobalt complexes

Many reports on the mass spectra of organotransition-metal complexes have appeared in recent years,¹ whilst there have only been a few reports on the mass spectra of transition metal olefin complexes, some metal carbonyl olefin complexes²³⁴ and π-cyclooctenyl-π-cyclooctadienyl cobalt.⁵ Recently fragmentation paths of π-cyclopentadienyl-cyclooctadiene rhodium were elucidated by King.⁶ The present authors found metastable ions in the mass spectra of π-cyclopentadienyl-diene cobalt complexes as well as in the mass spectra of π-cyclopentadienyl-diene rhodium complexes.⁷. In the present paper the authors wish to report the mass spectra of several π-cyclopentadienyl diene cobalt complexes.     

Numerical analysis of the behavior of hydrogen added into a free-burning arc

The objective of the present work is to investigate the behavior of hydrogen in an atmospheric-pressure free-burning argon are when a small amount of hydrogen is added into the arc. A two-dimensional model calculation is carried out under the assumption that the ionization reaction of argon is in equilibrium and the reactions among hydrogen molecules, atoms, ions, and electrons are not necessarily in equilibrium. This calculation gives the following conclusion. The hydrogen mass fraction of 0.001 is too small to affect the flow and temperature fields markedly, and the concentration ratios among the hydrogen species are in equilibrium in the greater part of the arc region except for same parts with a steep temperature gradient. The hydrogen mass Junction, however, is not uniform in the me and, especially in the high-temperature region near the cathodes, over three dynes mass fraction of the hydrogen accumulates and flows downstream to cause a high flux of hydrogen atom toward the anode. This phenomena can be explained by the large difference between the diffusivity of hydrogen atom and that of hydrogen ion in argon ion.     

Silylation of water glass. I. Solvent extraction and trimethylsilylation of silicic acid

Homogeneous trimethylsilylation of silicic acid in nonaqueous media was studied. The silylation process consisted of three steps: acidification of sodium silicate, solvent extraction. and trimethylation of silicic acid. Sodium silicate was first acidified with dilute sulfuric acid to form silicic acid: extraction followed with hydrophilic organic solvents. The Silicic acid obtained was finally allowed to react with trimethylchlorosilane to give trimethylsilylates with molecular weights of 1000–12,000. Optimum conditions for each step have been intensively sought to achieve trimethylsilylates in high yield. The trimethylsilylates exhibited excellent thermal stability and surface properties, such as water repellency and antifoaming properties, comparable to those of conventional polydimethylsiloxanes.