Behavior of Halogen Bonds of the Y−X⋅⋅⋅π Type (X,Y=F,Cl, Br,I) in the Benzene π System,Elucidated by Using a Quantum Theory of Atoms in Molecules Dual‐Functional Analysis

The nature of halogen bonds of the Y?X‐?‐π(C₆H₆) type (X, Y=F, Cl, Br, and I) have been elucidated by using the quantum theory of atoms in molecules (QTAIM) dual‐functional analysis (QTAIM‐DFA), which we proposed recently. Asterisks (?) emphasize the presence of bond‐critical points (BCPs) in the interactions in question. Total electron energy densities, H_b( r _c), are plotted versus H_b( r _c)?V_b( r _c)/2 [=(?²/8m)?²ρ_b( r _c)] for the interactions in QTAIM‐DFA, in which V_b( r _c) are potential energy densities at the BCPs. Data for perturbed structures around fully optimized structures were used for the plots, in addition to those of the fully optimized ones. The plots were analyzed by using the polar (R, θ) coordinate for the data of fully optimized structures with (θ_p, κ_p) for those that contained the perturbed structures; θ_p corresponds to the tangent line of the plot and κ_p is the curvature. Whereas (R, θ) corresponds to the static nature, (θ_p, κ_p) represents the dynamic nature of the interactions. All interactions in Y?X‐?‐π(C₆H₆) are classified by pure closed‐shell interactions and characterized to have vdW nature, except for Y?I‐?‐π(C₆H₆) (Y=F, Cl, Br) and F?Br‐?‐π(C₆H₆), which have typical hydrogen‐bond nature without covalency. I?I‐?‐π(C₆H₆) has a borderline nature between the two. Y?F‐?‐π(C₆H₆) (Y=Br, I) were optimized as bent forms, in which Y‐?‐π interactions were detected. The Y‐?‐π interactions in the bent forms are predicted to be substantially weaker than those in the linear F?Y‐?‐π(C₆H₆) forms.     

Studies of the Electronic Effects of Zinc Cluster Catalysts and Their Application to the Transesterification of β‐Keto Esters

The electronic effects of tetranuclear zinc cluster catalysts on transesterification were investigated by changing the carboxylate ligands in the clusters. High catalyst activity crucially depended on the balance between Lewis acidity and Brønsted basicity of the catalyst; this was consistent with the dual activation of both the electrophile and nucleophile by the cooperative zinc centers. In addition, tetranuclear zinc cluster catalysts achieved the transesterification of β‐keto esters with unprecedented levels of broad substrate generality, in which a newly developed pentafluoropropionate‐bridged zinc cluster and 4‐dimethylaminopyridine additive greatly improved the reactivity of sterically congested α‐ and α,α‐disubstituted β‐keto esters.     

Development of a mass spectrometric hydroxyl‐position determination method for the hydroxyindole metabolites of JWH‐018 by GC‐MS/MS

One of the many issues of designer drugs of abuse like synthetic cannabinoids (SCs) such as JWH‐018 is that details on their metabolism has yet to be fully elucidated and that multiple metabolites exist. The presence of isomeric compounds poses further challenges in their identification. Our group has previously shown the effectiveness of gas chromatography‐electron ionization‐tandem mass spectrometry (GC‐EI‐MS/MS) in the mass spectrometric differentiation of the positional isomers of the naphthoylindole‐type SC JWH‐081, and speculated that the same approach could be used for the metabolite isomers. Using JWH‐018 as a model SC, the aim of this study was to differentiate the positional isomers of its hydroxyindole metabolites by GC‐MS/MS. Standard compounds of JWH‐018 and its hydroxyindole metabolite positional isomers were first analyzed by GC‐EI‐MS in full scan mode, which was only able to differentiate the 4‐hydroxyindole isomer. Further GC‐MS/MS analysis was performed by selecting m/z 302 as the precursor ion. All four isomers produced characteristic product ions that enabled the differentiation between them. Using these ions, MRM analysis was performed on the urine of JWH‐018 administered mice and determined the hydroxyl positions to be at the 6‐position on the indole ring. GC‐EI‐MS/MS allowed for the regioisomeric differentiation of the hydroxyindole metabolite isomers of JWH‐018. Furthermore, analysis of the fragmentation patterns suggests that the present method has high potential to be extended to hydroxyindole metabolites of other naphthoylindole type SCs in identifying the position of the hydroxyl group on the indole ring. Copyright © 2016 John Wiley & Sons, Ltd.     

Thermostability of Cromobacterium viscosum lipase in AOT/isooctane reverse micelle

The thermostability of Cromobacterium viscosum lipase (EC 3.1.1.3) entrapped in AOT (sodium bis-[2-ethylhexyl] sulfosuccinate) reverse micelles was increased by the addition of short-chain polyethylene glycol (PEG 400). Two different approaches were considered: (1) the determination of half-life time and (2) the mechanistic analysis of deactivation kinetics. The half-life of lipase entrapped in AOT/isooctane reverse micelles with PEG 400 at 60 degrees C was 28 h, ninefold higher than that in reverse micelles without PEG 400. The lipase entrapped in both reverse micellar systems followed a series-type deactivation mechanism involving two first-order steps. The deactivation constant for the first step at 60 degrees C in PEG containing reverse micelles was 0.055 h!1, 11-fold lower than that in reverse micelles without PEG, whereas it remained almost constant for the second step. The inactivation energy of the lipase entrapped in reverse micelles with and without PEG 400 was 88.12 and 21.97 kJ/mol, respectively.     

Effect of the Pretreatment of Lipase with Organic Solvents on its Conformation and Activity in Reverse Micelles

The activity and conformation of Chromobacterium viscosum lipase-pretreated with various organic solvents were investigated. The pretreatment of lipase led to a substantial increase of enzyme activity in AOT (sodium bis [2-ethyl -1-hexyl] sulfosuccinate)/isooctane/water reverse micelles. Among the organic solvents used, n-hexane was found to be most effective. It was observed that higher hexane content with shorter agitation time and vice versa had almost the same effect on the initial activity of lipase. The kinetic study showed that the Michaelis constant (K _m) and the substrate adsorption equilibrium constant (K _ad) were reduced by the pretreatment of lipase with hexane, whereas the change in the maximum reaction rate (V _max) was insignificant. The two spectroscopic techniques (Fluorescence spectra of lipase encapsulated in RMs and Fourier transform infrared [FTIR] spectra of lipase powders) were performed to detect possible conformational changes in the enzyme caused by the pretreatment. A correlation between the maximum fluorescence intensity and the activity of treated lipase was found as a function of agitation time. The FTIR spectrum of lipase showed a new shape peak corresponding to 1,500 cm⁻¹ as a result of pretreatment with organic solvents.     

Electric birefringence and streaming-electric birefringence of synthesized imogolite: the anisotropy of electric polarizability

Imogolite synthesized from sodium orthosilicate and aluminum trichloride was fractionated into four fractions by centrifuging at 12,000 x g (1h). The supernatant, which did not deposit by three times centrifugations, was used for all measurements. The signal of birefringence under a reversing electric pulse showed that the permanent dipole moment is negligibly small at low fields. The electric birefringence under a rectangular electric pulse is positive. The saturated value is proportional to the concentration of imogolite in the range of 0-0.1mg/ml and decreases rapidly with an increase of added salt concentration for NaCl and AgNO(3). It slightly depends on the pH of solution and is biggest in pure water. Then we have determined the anisotropy of electric polarizability (Deltaalpha) for imogolite in pure water at 0.05 mg/ml. Deltaalpha we obtained from the method decreases rapidly at low fields and slowly at high fields as shown in references [M. Matsumoto, Colloids Surf. A 148 (1999) 75, M. Matsumoto, Biophys. Chem. 58 (1996) 173]. It is approximately shown by the following expression, Deltaalpha=Deltaalpha(infinity)+(Deltaalpha(0)-Deltaalpha(infinity))/(1+KE), (Deltaalpha(0):Deltaalpha at E=0, Deltaalpha(infinity):Deltaalpha at E=infinity). Using this relation we can draw the curve of electric birefringence as a function of electric field and compare it with experimental values. The results, when Deltaalpha(0)=1.17x10(-28)Fm(2), Deltaalpha(infinity)=0.005x10(-28)Fm(2) and K=0.00031 m/V, are in good agreement with each other. In order to explain the reason why the anisotropy of electric polarizability rapidly decreases with an increase of electric field we propose that the difference of electrophoretic mobility between parts of colloidal particle causes the orientation of a rod like particle. The theoretical electric birefringence as a function of electric field we obtained is considerably in good agreement with the experimental values.     

Synthesis and characterization of mononuclear ruthenium(III) pyridylamine complexes and mechanistic insights into their catalytic alkane functionalization with m-chloroperbenzoic acid

A series of mononuclear RuIII complexes [RuCl2(L)]+, where L is tris(2-pyridylmethyl)amine (TPA) or one of four TPA derivatives as tetradentate ligand, were prepared and characterized by spectroscopic methods, X-ray crystallography, and electrochemical measurements. The geometry of a RuIII complex having a non-threefold-symmetric TPA ligand bearing one dimethylnicotinamide moiety was determined to show that the nicotine moiety resides trans to a pyridine group, but not to the chlorido ligand. The substituents of the TPA ligands were shown to regulate the redox potential of the ruthenium center, as indicated by a linear Hammett plot in the range of 200 mV for RuIII/RuIV couples with a relatively large rho value (+0.150). These complexes act as effective catalysts for alkane functionalization in acetonitrile with m-chloroperbenzoic acid (mCPBA) as terminal oxidant at room temperature. They exhibited fairly good reactivity for oxidation of cyclohexane (C--H bond energy 94 kcal mol(-1)), and the reactivity can be altered significantly by the electronic effects of substituents on TPA ligands in terms of initial rates and turnover numbers. Catalytic oxygenation of cyclohexane by a RuIII complex with 16O-mCPBA in the presence of H2 18O gave 18O-labeled cyclohexanol with 100% inclusion of the 18O atom from the water molecule. Resonance Raman spectra under catalytic conditions without the substrate indicate formation of a RuIV==O intermediate with lower bonding energy. Kinetic isotope effects (KIEs) in the oxidation of cyclohexane suggest that hydrogen abstraction is the rate-determining step and the KIE values depend on the substituents of the TPA ligands. Thus, the reaction mechanism of catalytic cyclohexane oxygenation depends on the electronic effects of the ligands.     

Pd(OAc)2/P(cC6H11)3-catalyzed allylation of aryl halides with homoallyl alcohols via retro-allylation

Allylations of aryl halides take place upon treatment of tertiary homoallyl alcohols with aryl halides in the presence of cesium carbonate and a palladium catalyst. The allylation reaction would consist of the following steps: (1) oxidative addition of aryl halide to palladium, (2) ligand exchange between the halide and the homoallyl alcohol affording aryl(homoallyloxy)palladium, (3) retro-allylation of the palladium alkoxide to generate sigma-allyl(aryl)palladium with concomitant liberation of the relevant ketone, and (4) productive reductive elimination. Since the retro-allylation step proceeds in a concerted fashion via a conformationally regulated six-membered cyclic transition state, the allylation reactions are highly regio- and stereospecific when homoallyl alcohols having a substituted allyl group are used. Whereas triarylphosphine is known to serve as a ligand for the palladium-catalyzed allyl transfer reactions, tricyclohexylphosphine proves to significantly expand the scopes of aryl halides to electron-rich aryl chlorides and of homoallyl alcohols to cyclic homoallyl alcohols. The new arylative ring-opening reactions of cyclic homoallyl alcohols allow for the synthesis of ketones having a branched or linear allylarene moiety at the remote terminus in regio- and stereospecific manners.     

Palladium-catalyzed synthesis of spiro[2.4]heptanes: ligand-dependent position control in the nucleophilic attack to a pi-allylpalladium intermediate

A palladium-catalyzed intermolecular cycloaddition of gamma-methylidene-delta-valerolactones with electron-deficient olefins has been developed for the synthesis of spiro[2.4]heptanes with high selectivity through a nucleophilic ring closure to the central carbon of a pi-allylpalladium intermediate. It was found that the course of the reaction is dependent on the ligand employed, and selective [4 + 2] cycloadditions can also be achieved by the use of a bulky monophosphine ligand.