Highly efficient water splitting into H2 and O2 over lanthanum-doped NaTaO3 photocatalysts with high crystallinity and surface nanostructure

NiO-loaded NaTaO(3) doped with lanthanum showed a high photocatalytic activity for water splitting into H(2) and O(2) in a stoichiometric amount under UV irradiation. The photocatalytic activity of NiO-loaded NaTaO(3) doped with lanthanum was 9 times higher than that of nondoped NiO-loaded NaTaO(3). The maximum apparent quantum yield of the NiO/NaTaO(3):La photocatalyst was 56% at 270 nm. The factors affecting the highly efficient photocatalytic water splitting were examined by using various characterization techniques. Electron microscope observations revealed that the particle sizes of NaTaO(3):La crystals (0.1-0.7 microm) were smaller than that of the nondoped NaTaO(3) crystal (2-3 microm) and that the ordered surface nanostructure with many characteristic steps was created by the lanthanum doping. The small particle size with a high crystallinity was advantageous to an increase in the probability of the reaction of photogenerated electrons and holes with water molecules toward the recombination. Transmission electron microscope observations and extended X-ray absorption fine structure analyses indicated that NiO cocatalysts were loaded on the edge of the nanostep structure of NaTaO(3):La photocatalysts as ultrafine particles. The H(2) evolution proceeded on the ultrafine NiO particles loaded on the edge while the O(2) evolution occurred at the groove of the nanostep structure. Thus, the reaction sites for H(2) evolution were separated from those of O(2) evolution over the ordered nanostep structure. The small particle size and the ordered surface nanostep structure of the NiO/NaTaO(3):La photocatalyst powder contributed to the highly efficient water splitting into H(2) and O(2).     

Electrochemical and spectroelectrochemical properties of neptunium(VI) ions in nitric acid solution

A benchmark study was carried out to verify whether MCNP is useful in the design stage of a PGNAA facility for large samples up to 1 m length and 0.15 m diameter, using a 2.54 cm diameter thermal neutron beam. For this facility neutron self-shielding and gamma-attenuation correction methods have to be developed. The relative spatial neutron-density distributions within three samples with different macroscopic scattering and absorption cross sections were studied in a comparison between an MCNP simulation and an irradiation experiment using copper wires as neutron monitors. The neutron density in the sample was within statistical agreement between experiment and simulation. Typically the relative spatial neutron-density distributions agreed to within 1%. Therefore, MCNP can be used in design studies for the development of a large sample PGNAA facility as specified. This revised version was published online in July 2006 with corrections to the Cover Date.     

Structure elucidation and synthesis of lycoposerramine-B, a novel oxime-containing Lycopodium alkaloid from Lycopodium serratum Thunb

A new alkaloid, lycoposerramine-B (1), containing an oxime function, was isolated from the club moss Lycopodium serratum Thunb. The structure of 1 was elucidated by spectroscopic analysis, including J-resolved HMBC spectroscopy, and confirmed by its synthesis from the known alkaloid, serratinine (3).     

Kinetic study on the elastic change of vascular endothelial cells on collagen matrices by atomic force microscopy

The elasticity of vascular endothelial cells (HUVEC) was measured with an atomic force microscopy (AFM, Olympus), and analyzed by applying the Hertz model, and those data were compared with ones reported by us previously. The latter elasticity data were measured with AFM Instruments (Seiko) on the basis of the Young's modulus of gelatin gel, which was obtained from the measurement with a tensile tester. The elasticity of HUVEC was concluded to depend on the culture period. The elasticity of the cells cultured on type IV collagen for longer than 4 days led to average elasticity values higher than ca. 10(4)Pa. Moreover, the scattered values of elasticity decreased eminently in the AFM measurement of the cells at room temperature. A few cells, however, appeared to adhere long and tensely on matrix, which seems to one of reasons for relatively high elasticity in our previous works. The possibility of such high elasticity was considered to change in cell adhesion, anchoring on matrix during a long culture period.     

Determining dihedral angles and local structure in silk peptide by 13C-2H REDOR

13C-2H REDOR NMR experiments were performed on 30-residue (AlaGly)15 silk I mimics of Bombyx mori silk fibroin to gain structural details about the elusive structure of the silk I conformation. 13C,2H-labeling strategies are illustrated for measuring individual dihedral angles in peptides and for determining local structure by REDOR. A major turn of type II character is found in the region Gly(14)-Ala(17).     

A convenient synthesis of 1,1-disubstituted 1,2,3,4-tetrahydroisoquinolines via Pictet-Spengler reaction using titanium(IV) isopropoxide and acetic-formic anhydride

A synthesis of 1,1-disubstituted 1,2,3,4-tetrahydroisoquinolines (6) was achieved in a highly efficient manner via Pictet-Spengler reaction of arylethylamines (1) and acyclic and cyclic ketones (2) using titanium (IV) isopropoxide and acetic-formic anhydride. The cyclization of the in situ formed acyliminium ion (4) to N-formyl 1,2,3,4-tetrahydroisoquinoline (5) was greatly facilitated by using trifluoroacetic acid as an additional reagent. The Pictet-Spengler reaction was carried out by one pot procedure, providing a convenient and effective method for preparing various 1,2,3,4-tetrahydroisoquinolines.     

Synthesis of 4-heterocyclyl-hexahydro-8-methoxyfuro[3,2-c]quinolines by Lewis acid catalyzed [4 + 2]cycloaddition reaction

Synthesis of 2-substituted quinoline derivatives by Lewis acid catalyzed [4 + 2]cycloaddition was investigated.     

Extremely low-frequency phonon material and its temperature- and photo-induced switching effects

Atomic vibrations due to stretching or bending modes cause optical phonon modes in the solid phase. These optical phonon modes typically lie in the frequency range of 10² to 10⁴ cm⁻¹. How much can the frequency of optical phonon modes be lowered? Herein we show an extremely low-frequency optical phonon mode of 19 cm⁻¹ (0.58 THz) in a Rb-intercalated two-dimensional cyanide-bridged Co–W bimetal assembly. This ultralow frequency is attributed to a millefeuille-like structure where Rb ions are very softly sandwiched between the two-dimensional metal–organic framework, and the Rb ions slowly vibrate between the layers. Furthermore, we demonstrate temperature-induced and photo-induced switching of this low-frequency phonon mode. Such an external-stimulation-controllable sub-terahertz (sub-THz) phonon crystal, which has not been reported before, should be useful in devices and absorbers for high-speed wireless communications such as beyond 5G or THz communication systems.

Extremely low-frequency optical phonon mode in Rb-intercalated two-dimensional cyanide-bridged Co–W bimetal assembly and its temperature- and photo-induced switching effect.     

Solubilities of rare earth lodates in aqueous and aqueous alcoholic solvent mixtures

The solubilities of thirteen iodates of rare earth metals in aqueous and aqueous alcoholic solvent mixtures at 25°C were measured. Methanol and ethanol were used as the alcoholic components, and the alcohol concentrations in solvent mixtures were between 0–40 mass percent. From the solubilities measured in this study and the published data, the recommended solubility values of eleven iodates of rare earth metals [Ln(IO₃)₃: Ln=Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm and Yb] in water at 25°C were decided by applying the guidelines of the IUPAC Solubility Data Project, and the solubilities of two iodates [Ln(IO₃)₃: Ce and Lu] are designated as tentative values. The change in solubility of lanthanide iodates in aqueous and aqueous alcoholic solvent mixtures as a function of lanthanide atomic number is discussed. The logarithm of the solubility decreases almost linearly with the reciprocal of the dielectric constant of the solvent mixture, as expected from Born's equation and its modifications.Presentation to First International Symposium on Solubility Phenomena, University of Western Ontario, London, Ontario, August 21–23, 1984.     

Recent Developments in the In Situ XAFS and Related Work for the Characterization of Catalysts in Japan

This short review deals with some recent XAFS (X-ray absorption fine structure) applications to catalysts in Japan. The high transmission ability of X rays makes it possible to carry out in situ work on catalysts. First, in situ XAFS works under flow and high-pressure reaction conditions will be described. The time-resolved XAFS work will be another important topic because it can provide the possibility of observing the change of the reaction active site and the reaction intermediate. Finally, PTRF-XAFS will be described, which is a unique technique and provides three-dimensional local structures of highly dispersed surface species.