Infrared Emission Spectroscopic Study of the Dehydroxylation via Surface Silanol Groups of Synthetic and Natural Beidellite

The structural changes of synthetic and natural beidellites during dehydroxylation have been studied using infrared emission spectroscopy of the OH-stretching and bending regions. The OH-stretching region is characterized by two OH-stretching modes around 3600-3615 cm-1 and around 3650 cm-1. These bands strongly decrease in intensity upon dehydroxylation up to 600 degrees C for the natural beidellite and 700-750 degrees C for the synthetic ones. The differences in bandwidth, intensity, and dehydroxylation behavior are interpreted as due to differences in crystallinity with crystallinity increasing in the order natural beidellite < synthetic beidellite BSK3 < synthetic beidellite E498. Above 400 degrees C a new band attributed to silanol groups becomes visible in all samples due to transfer of the hydroxyls from the octahedral layer to the siloxane layer before they are lost. The broad band around 3300-3400 cm-1 is assigned to both H-bonding in H2O and H-bonding to Si-O-Al linkages. The presence of two different OH groups is also reflected in the OH-bending modes around 875-895 cm-1 and 915-925 cm-1 and in the OH-libration modes around 780 and 800-820 cm-1. These bands show a decrease in intensity upon heating and dehydroxylation of the clay structure. Here again the same order can be observed for the disappearance of the bands as for the OH-stretching region. Copyright 1999 Academic Press.     

Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7): a structure with tunable density of Na(+) vacancies

A series of samples with the composition Ca(1)(-)(x)Na(2)(x)Al(2)B(2)O(7) (0 < x < or = 1) was investigated and a hexagonal structure with unusually large range of homogeneity (at least from x = 0.01 to 0.95) was revealed. The hexagonal phase consists of [Al(2)B(2)O(7)](infinity)(2)(-) lamellae stacked along the c axis, as in CaAl(2)B(2)O(7) and Na(2)Al(2)B(2)O(7). Nevertheless, the configuration and stacking sequence of the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae are different in these three structures. In the hexagonal structure of Ca(1)(-)(x)()Na(2)(x)()Al(2)B(2)O(7), Ca and half Na cations (Na1) statistically occupy the same crystallographic site which is located between the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae, the other half Na cations (Na2) distribute in the planes bisecting the [Al(2)B(2)O(7)](infinity)(2)(-) lamellae. Depending on the composition, the site occupation factor of Na2 site can vary in the same range as x, leading to a tunable density of Na(+) vacancies in the structure. The AlO(4) tetrahedra and BO(3) triangles in the structure tilt in appropriate ways to improve the bond valence sum of Na2 cations which are not sufficiently bonded to the anions.     

A novel method for determination of inorganic oxyanions by electrospray ionization mass spectrometry using dehydration reactions

Novel methods for the determination of inorganic oxyanions by electrospray (ES) ionization mass spectrometry have been developed using dehydration reactions between oxyanions and carboxylic acids at the ES interface. Twelve oxyanions (VO₃^?, CrO₄^2?, MoO₄^2?, WO₄^2?, BO₃^3?, SiO₃^2?, SiO₄^4?, AsO₄^4?, AsO₂^?, SeO₄^2?, SeO₃^2? and NO₂^?), out of 16 tested, reacted with at least one of four aminopolycarboxylic acids, i.e. iminodiacetic acid (IDA), nitrilotriacetic acid (NTA), trans‐1,2‐diaminocyclohexane‐N,N,N′,N′‐tetraacetic acid and triethylenetetramine‐N,N,N′,N″,N′″,N′″‐hexaacetic acid, at the ES interface to produce the dehydration products that gave intense mass ion responses, sufficient for trace analysis. As examples, trace determinations of Cr^VI and silica in water samples were achieved after online ion exchange chromatography, where the dehydration product of CrO₄^2? and NTA (m/z 290) and that of SiO₄^4? and IDA (m/z 192) were measured. The limits of detection of the respective methods were 17 nM (0.83 ng Cr/ml) for Cr^VI and 0.17 μM (4.8 ng Si/mL) for SiO₄^4?. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and Photocatalytic Property of Hectorite/(Pt,TiO2) and H4Nb6O17/(Pt,TiO2) Nanocomposites

Abstract

TiO₂ and Pt have been intercalated in hectorite and H₄Nb₆O₁₇. The height of TiO₂ and Pt pillars was less than 0.8 nm and the band gap energy of TiO₂ pillars was ca. 3.3 eV. Both hectorite/TiO₂ and H₄Nb₆O₁₇(Pt, TiO₂) were capable of hydrogen evolution following irradiation from a high pressure mercury are (λ > 290 nm) in the presence of methanol as a sacrificial hole acceptor and the hydrogen evolution was enhanced by co-incorporation of Pt, although hectorite and hectorite/Pt did not show photocatalytic activity. Incorporation of Pt or Pt and TiO₂ in the interlayer of H₄Nb₆O₁₇ has resulted in enhanced photo evolution of hydrogen, however, TiO₂ alone in the interlayer of H₄Nb₆O₁₇ showed adverse photocatalytic activity.     

SYNTHESIS AND CHARACTERIZATION OF KINETICALLY STABILIZED 1,3-DIPHOSPHACYCLOBUTENE DERIVATIVES

1-(2,4,6-Tri-tert-butylphenyl)-2-phosphaethyne (1) was allowed to react with 0.5 equiv of an alkyllithium and subsequently with an alcohol to afford a bulky 1,3-diphosphacyclobutene, and its structure and coordination properties on transition metals were investigated. On the other hand, 1 was allowed to react with an alkyllithium and iodomethane to form a stable biradical, 1,3-diphosphacyclobutane-2,4-diyl.     

A Novel Reactivity of Phosphanylalumane (>P−Al<): Reversible Addition of a Saturated Interelement Bond to Olefins

The reversible addition of olefins to a phosphanylalumane, P−Al single-bond species, was investigated. The P−Al bond added to ethylene and relatively small terminal alkenes (propylene and hex-1-ene) at room temperature to give the corresponding alkene adducts. Heating the terminal alkene adducts released the corresponding alkenes and regenerated the P−Al bond, but no release of ethylene was observed even under vacuum conditions. The reactivity of ethylene adduct as a new saturated C₂ vicinal P/Al-based FLP was also investigated. The ethylene adduct was found to undergo complexation with nitriles to give the corresponding nitrile adducts to the Al center, which retained the ethylene tether as in the case of the corresponding P/B-based FLP. However, the reactivity of ethylene toward CO₂ and benzaldehyde differed from that of the P/B system giving the corresponding adducts.     

Cross‐Coupling of Organolithium with Ethers or Aryl Ammonium Salts by C−O or C−N Bond Cleavage

Various aryl‐, alkenyl‐, and/or alkyllithium species reacted smoothly with aryl and/or benzyl ethers with cleavage of the inert C?O bond to afford cross‐coupled products, catalyzed by commercially available [Ni(cod)₂] (cod=1,5‐cyclooctadiene) catalysts with N‐heterocyclic carbene (NHC) ligands. Furthermore, the coupling reaction between the aryllithium compounds and aryl ammonium salts proceeded under mild conditions with C?N bond cleavage in the presence of a [Pd(PPh₃)₂Cl₂] catalyst. These methods enable selective sequential functionalizations of arenes having both C?N and C?O bonds in one pot.     

Which Stereoinductor Is Better for Asymmetric Functionalization of α-Amino Acids in a Nickel(II) Coordination Environment? Experimental and DFT Considerations

The results of extended comparative investigation of nickel(II) Schiff base complexes (containing various auxiliary chiral moieties) commonly used as a methodological platform for the asymmetric synthesis of tailor-made α-amino acids are provided. The following issues are addressed: 1) redox activity (determining the possibility for electrochemically induced reactions); 2) quantitative estimation of the reactivity of deprotonated complexes towards electrophiles; and 3) quantum-chemical estimation of noncovalent interactions in the metal coordination environment (which shed light on the origin of the stereochemical outcome observed for different stereoinductors). Possible mechanisms that determine the relationship between the stereochemical configuration of a molecule and its electronic structure are discussed. The DFT-calculated HOMO–LUMO energies and localization, as well as relative energies for the (S)- and (R)-alanine derivatives, that determine the stereoinduction efficiency in thermodynamically controlled reactions in nickel(II) coordination are provided. The computational data are supported by experimental results on the monobenzylation of glycine derivatives.     

Homo‐double helix formation of an optically active conjugated polymer bearing carboxy groups and amplification of the helicity upon complexation with achiral and chiral amines

An optically active, m‐terphenyl‐based π‐conjugated polymer bearing carboxy groups was synthesized by the copolymerization of the diethynyl monomer bearing a carboxy group with (S,S)‐2,5‐bis(2‐methylbutoxy)‐1,4‐dibromobenzene using Sonogashira reaction. The copolymer showed a weak circular dichroism (CD) in the main‐chain chromophore region due to a homo‐double helix formation with an excess helical handedness biased by the chiral alkoxy substituents through self‐association. However, upon complexation with achiral amines, such as piperidine, the CD intensity of the polymer significantly increased resulting in the formation of a greater excess one‐handed homo‐double helix via hydrogen‐bonded inclusion complexation with the achiral amines between each strand, leading to the amplification of the helicity. A preferred‐handed homo‐double helix was also induced in the polymer in the presence of nonracemic amines. The effect of the achiral and chiral amines on the homo‐double helix formation was investigated by comparing the CD spectra of the polymer to those of its model dimer. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 990–999