Nonideal mixing of dodecyltrimethylammonium halides and nonionic surfactant in adsorbed films and micelles

The ion–dipole interaction between dodecyltrimethylammonium cations and nonionic surfactant molecules in adsorbed films and micelles was investigated by concentrating on the difference in the degree of counterion binding by employing dodecyltrimethylammonium chloride (DTAC)–octyl methyl sulfoxide (OMS) and dodecyltrimethylammonium bromide (DTAB)–OMS mixtures. The phase diagrams of adsorption and micelle formation were constructed and then the nonideal mixing of different species of surfactants was demonstrated in terms of the excess Gibbs free energies of adsorption and micelle formation, and the surface excess areas. Furthermore the dependence of them on the counterion was clearly shown. All these results were found to support our previous view that the direct interaction between surfactant cation and the dipole of the hydrophilic part of a nonionic surfactant is essential in cationic-nonionic surfactant mixtures, i.e., the DTAC system with a lower counterion biding has more negative excess thermodynamic quantities than the DTAB system with a higher one.     

Microchannel emulsification using gelatin and surfactant-free coacervate microencapsulation

In this study, we investigated the use of microchannel (MC) emulsifications in producing monodisperse gelatin/acacia complex coacervate microcapsules of soybean oil. This is considered to be a novel method for preparing monodisperse O/W and W/O emulsions. Generally, surfactants are necessary for MC emulsification, but they can also inhibit the coacervation process. In this study, we investigated a surfactant-free system. First, MC emulsification using gelatin was compared with that using decaglycerol monolaurate. The results demonstrated the potential use of gelatin for MC emulsification. MC emulsification experiments conducted over a range of conditions revealed that the pH of the continuous phase should be maintained above the isoelectric point of the gelatin. A high concentration of gelatin was found to inhibit the production of irregular-sized droplets. Low-bloom gelatin was found to be suitable for obtaining monodisperse emulsions. Finally, surfactant-free monodisperse droplets prepared by MC emulsification were microencapsulated with coacervate. The microcapsules produced by this technique were observed with a confocal laser scanning microscope. Average diameters of the inner cores and outer shells were 37.8 and 51.5 microm; their relative standard deviations were 4.9 and 8.4%.     

Amination and amidation of aryl iodides catalyzed by copper(I)-phenanthroline complexes

Four kinds of copper(I)-phenanthroline complexes ([Cu^I(phen)₂]Cl, [Cu^I(phen)Cl]₂, [Cu^I(phen)₂]BF₄, and Cu^I(phen)PPh₃Cl) were prepared and used as catalysts for amination and amidation of aryl iodide to investigate the influence on the yields of products due to differences of the structures. These complexes were found to work as catalysts on these reactions and showed that the differences of structures of copper(I) complexes significantly influenced the yield of aryl-nitrogen bond forming processes.     

Evaluation of canonical and microcanonical nonadiabatic reaction rate constants by using the Zhu-Nakamura formulas

We consider a problem of calculating both thermal and microcanonical rate constants for nonadiabatic chemical reactions. Instead of using the conventional transition state theory, we use a generalized seam surface and introduce a concept of a coordinate dependent effective nonadiabatic transition probability based on the Zhu-Nakamura theory which can treat the nonadiabatic tunneling properly. The present approach can be combined with Monte Carlo method so as to be applicable to chemical reactions in complicated systems. The method is demonstrated to work well in wide energy and temperature range. Numerical tests also show that it is very essential for accurate evaluation of the thermal rate constant to use the generalized seam surface and take into account the nonadiabatic tunneling effect.     

Dynamic redox systems based on bis(spiroxanthene)-type donors with a polycyclic aromatic hydrocarbon: preparation, X-ray structures, and electrochromic response with fluorescence change

The long C-C bonds (1.614(2)-1.630(2) Å) in newly prepared title donors 2-6 are cleaved upon two-electron oxidation to afford the bond-dissociated dicationic dyes 2²⁺-6²⁺, whose electron affinities are stronger than the corresponding biphenyl-2,2′-diyl dications 1²⁺ due to the spatial proximity of two xanthenylium units. Not only UV-vis but also fluorescence spectra changed drastically upon electrolysis since only colorless neutral donors are fluorescent.     

Solubility, diffusion coefficient and ionic conductivity of alkyl viologens in poly(ethylene oxide) and its derivatives

A series of alkyl viologens RV (R denotes ethyl, butyl, hexyl, heptyl, and dodecyl) was dissolved in poly(ethylene oxide) (PEO) oligomers (average molar masses of 200, 300, 400, 600 and 1000 g mol⁻¹). The solubility of RV in PEO oligomers decreased with increasing alkyl chain length of RV and the molar mass of PEO. Cyclic voltammograms of RV in PEO containing 0.50 M LiClO₄ clearly show two redox waves. The ionic conductivity of PEO oligomers containing RV decreased with increasing alkyl chain length, suggesting the migration of RV itself in the PEO oligomers. Potential step chronoamperometry was used to obtain the apparent diffusion coefficient of RV in the PEO oligomers. The ionic conductivity has a linear relationship with the apparent diffusion coefficient regardless of the RV species, the PEO molar mass and the temperature. RV was shown to act as a redox mediator in PEO oligomers as long as the ionic conductivity of the PEO was high. Poly(oligo(oxyethylene) methacrylate) (PMEO) was used as a solid solvent for a series of alkyl viologens. Since PMEO is an excellent ion-conducting polymer, RV was confirmed to be an effective redox mediator in this PMEO. It was concluded in this study that ionic conductivity in the polymer matrix could be used as an effective parameter for prediction of the diffusion coefficient of charged organic molecules.     

Determination of boron in high-purity tantalum materials by on-line matrix separation/inductively coupled plasma mass spectrometry

A method for the determination of ultratrace amounts of boron in high-purity tantalum materials [tantalum metal, tantalum(v) oxide, tantalum pentachloride and tantalum pentaethoxide] is described. On-line anion-exchange matrix separation combined with inductively coupled plasma mass spectrometry (ICP-MS) was employed for the determination of boron at the ng g(-1) level. Tantalum materials were dissolved using HF and/or HNO3 prior to analysis. The loss of boron in the sample preparation procedure was examined as the recovery of boron by adding a definite amount of boron to each tantalum material sample before decomposition, and it was almost negligible. In an anion-exchange method using 0.1 M HF carrier solution, tantalum and boron in the sample solution were first adsorbed on a strongly basic anion-exchange resin. Next, boron was eluted from the resin with 5 M HCl, whereas tantalum was retained strongly adsorbed. The eluted boron was introduced directly into the ICP-MS system for quantitative analysis at m/z 10 and 11. Because of the long elution time of boron, the transient signal was integrated in the time range 70-300 s on the chromatogram. Although the elution of boron in the time range was ca. 40% of total boron in the sample solution injected, the determination limits (10sigma) obtained by the present method were 30, 25, 15 and 13 ng g(-1) for tantalum metal, tantalum(v) oxide, tantalum pentachloride and tantalum pentaethoxide, respectively. The method was applied to the determination of boron in commercially available high-purity tantalum materials and it was found that the concentrations of boron were in the ng g(-1)-microg g(-1) range.     

Specific interactions of poly(4-vinyl phenol) gel with cationic and anionic surfactants

Binding behaviors of ionic surfactants (decyl- and dodecyltrimethylammonium bromide (C(10)TAB, C(12)TAB), sodium decane sulfonate (SDeSo), and sodium dodecyl sulfate (SDS)) to poly(4-vinyl phenol) (P4VPh) gel were investigated to elucidate a specific swelling behavior that has been found for P4VPh gel in aqueous solutions of tetraalkylammonium salts. With increasing cationic surfactant concentration, P4VPh gel significantly deswelled and then remarkably reswelled at a concentration somewhat below the respective cmc values. On the other hand, in the case of the anionic surfactants, the gel only showed a marked swelling at a concentration just below the respective cmc values. A similar charge-specific behavior of the surfactants was also found for the P4VPh dispersion system studied with a UV-vis spectroscopy; namely, in the cationic surfactant-P4VPh systems, the turbidity of the dispersion first increased with increasing the surfactant concentration and then decreased. This result suggests that aggregation of P4VPh particles first occurred and finally the particles were solubilized. A red shift followed by a blue shift observed for a pi-pi absorption of phenol at around 278 nm was also consistent with the aggregation-solubilization behavior. In the anionic surfactant-P4VPh system, however, only solubilization of the polymer particle was observed, and the UV peak only showed a blue shift. All these results in the gel and the dispersion systems strongly suggest that the cation-pi interaction is involved in the binding of the cationic surfactants to P4VPh.     

Intermolecular Ferromagnetic and Antiferromagnetic Interactions in Halogen-Bridged Copper(I) Imino Nitroxides: Crystal Structures and Magnetic Properties of [Cu(I)(&mgr;-X)(imino nitroxide)](2) (X = I or Br)

Reaction of CuI or CuBr with some imino nitroxides in methanol gave the halogen bridged dinuclear Cu(I) complexes [Cu(&mgr;-I)(impy)](2) (1), [Cu(&mgr;-I)(immepy)](2) (2), [Cu(&mgr;-Br)(immepy)](2) (3), and [Cu(&mgr;-Br)(imph-NO(2))](2) (4), respectively (impy = 2-(2'-pyridyl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazolyl-1-oxyl, immepy = 2-(6'-methyl-2'-pyridyl)-4,4,5,5-tetramethyl-4,5-dihydro-1H-imidazolyl-1-oxyl, imph-NO(2) = 2-(4'-nitrophenyl)-4,4,5,5-tetramethyl-4,6-dihydro-1H-imidazolyl-1-oxyl). Crystal structures and magnetic properties have been studied. Complexes 1-4 have dimeric structures where two copper ions are doubly bridged by halide ions in a &mgr;(2) fashion. In 1-3, each copper ion is tetrahedral with a bidentate imino nitroxide and two halide ions, and the two copper ions are separated by 2.592(2), 2.6869(8), and 2.7357(6) ?, respectively. In 4, triangular coordination sites of the copper ions are completed with a nitrogen atom from the imino nitroxide and two bromide ions bridging the two copper ions with a separation of 3.074(2) ?. Ligand imino nitroxides in 1-4 form one-dimensional radical chains, and the chains are linked with halocuprate dimer units. Structural and magnetic susceptibility data support that radicals in 1 and 4 are ferromagnetically stacked, while radicals in 2 and 3 form an antiferromagnetic chain. The magnetic behaviors are discussed in connection with the stacking modes of the radicals and bridging conformations. Crystal data (Mo Kalpha, lambda = 0.71069 ?): 1, orthorhombic, space group P2(1)2(1)2(1), a = 17.807(2) ?, b = 8.595(2) ?, c = 19.336(6) ?, and Z = 4; 2, monoclinic, space group P2(1)/c, a = 9.941(2) ?, b = 18.482(2) ?, c = 8.337(2) ?, beta = 96.41(2) degrees, and Z = 2; 3, monoclinic, space group P2(1)/c, a = 9.964(6) ?, b = 18.167(4) ?, c = 8.009(7) ?, beta = 95.81(6) degrees, and Z = 2; 4, monoclinic, space group P2(1)/c, a = 11.991(7) ?, b = 17.998(8) ?, c = 7.215(6) ?, beta = 104.07(6) degrees, and Z = 2.     

Simultaneous multi-element analysis for trace metals in sea water by inductively-coupled plasma/atomic emission spectrometry after batch preconcentration on a chelating resin

Batch treatment with Chelex-100 resin was investigated for preconcentration of trace metals in sea water followed by determination by inductively-coupled plasma atomic emission spectrometry. The preconcentration conditions such as resin weight, stirring time, and amount of ammonium acetate buffer solution were carefully examined for effective multi-element preconcentration from sea water. The resin weight could be decreased to 0.5 g (dry weight) for 1 l of sea water, which was much less than that required in the column method, and a preconcentration factor of 100 was achieved. Al, Ti, V, Mn, Fe, Co, Ni, Cu, Zn, Y, Mo, Cd and Pb in sea water were measured with good precision. The detection limits ranged from 6 to 180 ng l^?1. The time required for one sample by the batch method was only 3 h.