Laser-induced fluorescence and infrared spectroscopic studies on the specific solvation of tris(1-(2-thienyl)-4,4,4-trifluoro-1,3-butanedionato)europium(III) in an ionic liquid

The extraction constant and the two-phase stability constant (K_D,Mβ₃) of tris(2-thenoyltrifluoroacetonato)europium(III) between 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₄mim][Tf₂N]) as an ionic liquid and an aqueous phase were determined by considering the extraction equilibria including anionic tetrakis(2-thenoyltrifluoroacetonato)europate(III). Specific solute-solvent interactions between the neutral Eu(III) chelate and [C₄mim][Tf₂N] molecules were revealed from the relationships between the distribution constant of the enol form of 2-thenoyltrifluoroacetone (Htta) as a proton chelate and the distribution constant (K_D,M) of the neutral Eu(III) chelate because the [C₄mim][Tf₂N] system gave the high K_D,Mβ₃ value compared with those in conventional molecular solvents such as benzene and 1,2-dichloroethane. The coordination environment of Eu³⁺ in the neutral Eu(III) chelate in [C₄mim][Tf₂N] was investigated by time-resolved laser-induced fluorescence spectroscopy and infrared absorption spectroscopy. Both methods consistently indicated that not only the Eu(III) chelate extracted but also Eu(tta)₃(H₂O)₃ synthesized as a solid crystal were almost completely dehydrated in [C₄mim][Tf₂N] saturated with water. Consequently, the higher K_D,M or extractability of the neutral Eu(III) chelate in the [C₄mim][Tf₂N] system can be ascribed to the dehydration of the Eu(III) chelate, which is caused by the specific solvation with [C₄mim][Tf₂N] molecules.     

Synthesis and property of soluble poly(1,1′-dialkyl-3,3′-ferrocenylenevinylene)s via titanium-induced dicarbonyl-coupling reaction of 1,1′-dialkylferrocene-3,3′-dicarbaldehydes

1,1′-Dialkylferrocene-3,3′-dicarbaldehydes ( 1a–c ) with long alkyl chains such as ethyl, hexyl, and dodecyl groups were prepared in 13–25% yield via three-step reactions. The titanium-induced dicarbonyl-coupling reaction of 1a–c gave poly(1,1′-dialkyl-3,3′-ferrocenylenevi-nylene)s ( 2a–c ) in quantitative yields, which were the molecular weights of 3000–10,000 and highly soluble in chloroform, benzene, and hexane. The electrical conductivity and the third-order nonlinear optical susceptibility for poly(1,1′-dihexyl-3,3′-ferrocenylenevinylene) ( 2b ) were estimated to be 1 × 10^?2 S/cm on doping with iodine and 1–4 × 10^?12 esu at a wavelength of 1–2.4 μm, respectively. © 1995 John Wiley & Sons, Inc.     

Formation of tetrahydrocurcumin by reduction of curcumin with cultured plant cells of Marchantia polymorpha

Cultured plant cells of Marchantia polymorpha, Nicotiana tabacum, Phytolacca americana, Catharanthus roseus, and Gossypium hirsutum were examined for their ability to reduce curcumin. Only M. polymorpha cells converted curcumin into tetrahydrocurcumin in 90% yield in one day. Time-course experiment revealed a two-step formation of tetrahydrocurcumin via dihydrocurcumin.     

Enantioselective Diels-Alder reaction of α-(acylthio)acroleins: a new entry to sulfur-containing chiral quaternary carbons

A catalytic and enantioselective Diels-Alder reaction of α-(carbamoylthio)acroleins induced by an organoammonium salt of chiral triamine is described. α-(Carbamoylthio)acroleins are designed and synthesized as new sulfur-containing dienophiles for the first time. The Diels-Alder reaction affords chiral tertiary thiol precursors with up to 91% ee.     

Star-shaped trimeric quaternary ammonium bromide surfactants: adsorption and aggregation properties

Novel star-shaped trimeric surfactants consisting of three quaternary ammonium surfactants linked to a tris(2-aminoethyl)amine core were synthesized. Each ammonium had two methyls and a straight alkyl chain of 8, 10, 12, or 14 carbons. The adsorption and aggregation properties of these tris(N-alkyl-N,N-dimethyl-2-ammoniumethyl)amine bromides (3C(n)trisQ, in which n represents alkyl chain carbon number) were characterized by equilibrium and dynamic surface tension, rheology, small-angle neutron scattering (SANS), and cryogenic transmission electron microscopy (cryo-TEM) techniques. 3C(n)trisQ showed critical micelle concentrations (CMC) 1 order of magnitude lower than that of the corresponding gemini surfactants with an ethylene spacer and the corresponding monomeric surfactants. The logarithm of the CMC decreased linearly with increasing hydrocarbon chain length for 3C(n)trisQ. The slope of the line, which is well-known as Klevens equation, was larger than those of the monomeric and gemini surfactants; however, considering the total carbon number in the chains, the slope was shallower than the monomeric and was close to the gemini. Through the results such as surface tensions at the CMC (32-34 mN m(-1)) and the parameters of standard free energy, CMC/C(20) and pC(20), it was found that 3C(n)trisQ could adsorb densely at the air/water interface despite the strong electrostatic repulsion between multiple quaternary ammonium headgroups. Moreover, dynamic surface tension measurements showed that the kinetics of adsorption for 3C(n)trisQ to the air/water interface was slow because of their bulky structures. Furthermore, the results of rheology, SANS, and cryo-TEM determined that 3C(n)trisQ with n = 10 and 12 formed ellipsoidal micelles at low concentrations in solution and the structures transformed to threadlike micelles with very few branches for n = 12 as the concentration increased, but for n = 14 threadlike micelles formed at relatively low concentrations.     

Determination of rare earth elements in geological samples by inductively-coupled plasma atomic emission spectrometry after oxalate coprecipitation and cation-exchange column separation

A method for separation and determination of traces of 14 rare earth elements (REEs) in geological samples is described. Determination by inductively-coupled plasma atomic emission spectrometry follows oxalate coprecipitation of the REEs with calcium as carrier and cation- exchange column separation in nitric acid. The combination of the two separation techniques improved the low recoveries found for Sm, Eu, and Gd when only ion-exchange was used, especially for iron- and aluminum-rich samples. The method was applied to the analysis of geological standard materials NBS SRM 688 (basalt), NBS SRM 278 (obsidian), GSJ JB-1 (basalt), GSJ JA- 2 (andesite), and CCRMP SY-3 (syenite). The results were evaluated on the basis of chondrite- normalized rare earth element distribution patterns.     

Structure Switching and Modulation of the Magnetic Properties in Diarylethene‐Bridged Metallosupramolecular Compounds by Controlled Coordination‐Driven Self‐Assembly

We report three self‐assembled iron complexes that comprised an anti‐parallel open form (o‐ L _anti), a parallel open form (o‐ L _syn), and a closed form (c‐ L ) of diarylethene conformers. Under kinetic control, Fe^II₂(o‐ L _anti)₃ was isolated, which exhibited a dinuclear structure with diamagnetic properties. Under light‐irradiation control, Fe^II₂(c‐ L )₃ was prepared and exhibited paramagnetism and spin‐crossover behaviour. Under thermodynamic control and in the presence of indispensable [Fe^III(Tp*)(CN)₃]^?, Fe^II₂(o‐ L _anti)₃ and Fe^II₂(c‐ L )₃ transformed into tetranuclear Fe^III₂Fe^II₂(o‐ L _syn)₂, which exhibited complete spin‐crossover behaviour at T_1/2=353 K.     

Synthesis of trans-fused polycyclic ethers with angular methyl groups using sulfonyl-stabilized oxiranyl anions

An efficient method has been developed for the synthesis of trans-fused tetrahydropyrans with angular methyl groups adjacent to the ring oxygen. The procedure involves the coupling reaction of a sulfonyl-stabilized oxiranyl anion with an appropriate triflate followed by 6-endo cyclization, and is effective for the construction of 6/6- and 6/7/6-cyclic ether ring systems with sterically congested 1,3-diaxial methyl groups.