Construction of a dimethyl sulfoxide sensor based on dimethyl sulfoxide reductase immobilized on a au film electrode.

A novel dimethyl sulfoxide (DMSO) sensor using DMSO reductase and film electrodes was constructed. The Au and Ag electrodes were fabricated on slide glass by vacuum deposition and the application of a photolithographic technique. The micro-chamber (4 x 50 x 1 mm, volume 200 microl) was fabricated on a poly(dimethylsiloxane) (PDMS) polymer. The Pt electrode was implanted in a PDMS polymer. DMSO reductase was immobilized on a Au film electrode with bovine serum albumin (BSA)-glutaraldehyde. This sensor could determine DMSO in an unpurged aqueous solution with glucose oxidase (GOD) and catalase (CAT) for oxygen removal. The DMSO sensor showed a linear response within 1 mM DMSO with a correlation coefficient of 0.999. The detection limit was 200 microM (3sigma), and the sensitivity was 23.8 mA M(-1) cm(-2). The relative standard deviations at each concentration were within 3.6%.     

Synthesis and optical properties of fluorene‐based polymers incorporating organosilicon unit

The synthesis and optical properties of polymers bearing the repeating unit of terfluorene and various organosilicon groups were investigated. Polymers with high molecular weight and good solubility could be obtained by Suzuki coupling polymerization from silylene‐containing fluorene‐based dibromo monomers and 9,9‐dihexylfluorene‐2,7‐bis(trimethyleneborate). From UV spectra of polymers bearing acyclic silylene bridge, the organosilicon units not only interrupted a π‐conjugation but also contributed to an electronic communication between connected fluorenes. The emission maximum wavelengths (ca. 400 nm) blue‐shifted when compared with that of polyfluorene (418 nm) and the fluorescence quantum yields were considerably high (>0.82) in the CHCl₃ solution. On the other hand, rather broad emission was observed at 480 nm and the fluorescence quantum yield was quite low (0.004) in the solution‐state PL spectrum of tetraphenylsilole‐containing polymer. The polymer emitted visible green light in the spin‐coated film. The fluorescence peak intensity at 486 nm gradually decreased when the film was illuminated with the UV light of 359 nm in air. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4786–4794, 2007     

Novel fluorescent asparaginyl-N-acetyl-d-glucosamines (Asn-GlcNAc) for the resolution of oligosaccharides in glycopeptides, based on enzyme transglycosylation reaction

Several fluorescent asparaginyl-N-acetyl-d-glucosamines (Asn-GlcNAcs), i.e., DBD-Asn-GlcNAc, NBD-Asn-GlcNAc, NDA-Asn-GlcNAc, PS-Asn-GlcNAc, FITC-Asn-GlcNAc, DMEQ-Asn-GlcNAc and DBD-PZ-Boc-Asn-GlcNAc, were synthesized as the acceptors for the resolution of oligosaccharides in glycopeptides. The resolution of oligosaccharides is based on the transglycosylation reaction with end-β-N-acetylglucosaminidase (Endo-M), isolated from Mucor hiemalis. The synthesis of each fluorescent acceptor was carried out in a one-pot reaction of Asn-GlcNAc and the corresponding fluorescent tagging reagent. The transglycosylation reaction using Endo-M proceeds at RT in neutral phosphate buffer (pH 6.0) and reached maxima at around 30 min. When Fmoc-Asn-GlcNAc (acceptor) was enzymatically reacted with Disialo-Asn (donor) in the presence of Endo-M, the ratio of Disialo-Asn-Fmoc (transglycosylation product) was almost comparable with the decreasing ratio of Fmoc-Asn-GlcNAc. Therefore, the transglycosylation activity of Endo-M from Disialo-Asn (donor) and fluorescent-Asn-GlcNAc (acceptor) was calculated from the decreasing ratio of fluorescent-Asn-GlcNAc. The order was NDA-Asn-GlcNAc > DBD-Asn-GlcNAc Fmoc-Asn-GlcNAc > NBD-Asn-GlcNAc DMEQ-Asn-GlcNAc > DNS-Asn-GlcNAc > PS-Asn-GlcNAc > FITC-Asn-GlcNAc. On the other hand, the activity with a fluorescent acceptor (DBD-PZ-Boc-Asn-GlcNAc), labeled to a carboxylic acid group in the Asn residue, was the strongest among the synthesized acceptors.     

One‐Step Borylation of 1,3‐Diaryloxybenzenes Towards Efficient Materials for Organic Light‐Emitting Diodes

The development of a one‐step borylation of 1,3‐diaryloxybenzenes, yielding novel boron‐containing polycyclic aromatic compounds, is reported. The resulting boron‐containing compounds possess high singlet‐triplet excitation energies as a result of localized frontier molecular orbitals induced by boron and oxygen. Using these compounds as a host material, we successfully prepared phosphorescent organic light‐emitting diodes exhibiting high efficiency and adequate lifetimes. Moreover, using the present one‐step borylation, we succeeded in the synthesis of an efficient, thermally activated delayed fluorescence emitter and boron‐fused benzo[6]helicene.     

One‐Pot Synthesis of 3‐Acetyl‐2‐aryl‐3,4‐dihydroquinazolines from N‐[2‐(Azidomethyl)phenyl]benzamides Utilizing Intramolecular Aza‐Wittig Reaction

A new and convenient method for the preparation of 3,4‐dihydroquinazolines 5 with aryl and Ac groups at C(2) and N(3), respectively, has been developed. The key sequence is the formation of aza‐phosphorane intermediates by the reaction of N‐[2‐(azidomethyl)phenyl]benzamides 1 with Ph₃P, followed by intramolecular aza‐Wittig reaction and 3‐acetylation, which can be conducted in one‐pot.     

High‐performance liquid chromatography separation of unsaturated organic compounds by a monolithic silica column embedded with silver nanoparticles

The optimization of a porous structure to ensure good separation performances is always a significant issue in high‐performance liquid chromatography column design. Recently we reported the homogeneous embedment of Ag nanoparticles in periodic mesoporous silica monolith and the application of such Ag nanoparticles embedded silica monolith for the high‐performance liquid chromatography separation of polyaromatic hydrocarbons. However, the separation performance remains to be improved and the retention mechanism as compared with the Ag ion high‐performance liquid chromatography technique still needs to be clarified. In this research, Ag nanoparticles were introduced into a macro/mesoporous silica monolith with optimized pore parameters for high‐performance liquid chromatography separations. Baseline separation of benzene, naphthalene, anthracene, and pyrene was achieved with the theoretical plate number for analyte naphthalene as 36 000 m^?1. Its separation function was further extended to cis/trans isomers of aromatic compounds where cis/trans stilbenes were chosen as a benchmark. Good separation of cis/trans‐stilbene with separation factor as 7 and theoretical plate number as 76 000 m^?1 for cis‐stilbene was obtained. The trans isomer, however, is retained more strongly, which contradicts the long‐ established retention rule of Ag ion chromatography. Such behavior of Ag nanoparticles embedded in a silica column can be attributed to the differences in the molecular geometric configuration of cis/trans stilbenes.     

Highly selective photoinduced perfluoroalkylation of vinylsilanes and its application to synthesis of water-shedding polysilanes

The functionalization of polysilanes is an important subject in materials science because functionalized polysilanes are expected to exhibit potentially innovative properties. This research aims at the addition of a water-shedding property to polysilanes by introducing perfluoroalkyl groups into their skeleton. The photoinduced iodoperfluoroalkylation of various vinylsilanes takes place successfully upon irradiation with a xenon lamp: vinylmonosilanes undergo iodoperfluoroalkylation with perfluoroalkyl iodides (R_fI) regioselectively, and the corresponding perfluoroalkylated silanes are obtained in moderate to high yields. Detailed optimization of the photoinduced iodoperfluoroalkylation has been investigated to apply this method to the functionalization of polysilanes. Polysilanes having vinyl groups can be synthesized by the reductive coupling of dichlorovinylsilanes with samarium diiodide (SmI₂) and samarium metal (Sm) upon irradiation with visible light. The synthesized vinylpolysilanes and R_fI (about 1.0 mM CHCl₃ solution) are coated on a glass plate sequentially, and then the following photoirradiation with light of a wavelength over 300 nm successfully adds an excellent water-shedding property to the glass plate.     

Generation of Aryl(2‐lithiophenyl)methanone O‐Methyl Oximes and Their Use for the Synthesis of N‐(3‐Alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines via the Reaction with Nitriles

An efficient two‐step procedure for the preparation of a new type of 1H‐isoindoles, i.e., N‐(3‐alkyl‐1‐aryl‐ or 1,3‐diaryl‐1H‐isoindol‐1‐yl)‐O‐methylhydroxylamines 5 , from readily available aryl(2‐bromophenyl)methanones 1 has been developed. Aryl(2‐bromophenyl)methanone O‐methyloximes 2 , derived from the corresponding ketones, were treated with BuLi in Et₂O at 0° to generate novel lithium compounds, aryl(2‐lithiophenyl)methanone O‐methyloximes 3 , which were allowed to react with nitriles to give the desired products 5 in moderate‐to‐fair yields.     

First total synthesis of (±)-adunctin B

The first total synthesis of (±)-adunctin B (1), a natural product isolated from Piper aduncum (Piperaceae) and having antibacterial activity, was achieved in 1.26% overall yield in 15 steps from 5,7-dimethoxycoumarin-3-carboxylate (8).     

Preparation of low-surface-energy poly[2-(perfluorooctyl)ethyl acrylate] microparticles and its application to liquid marble formation

We demonstrate the successful preparation of stable liquid marbles from various liquids. This is accomplished by using low-surface-energy poly[2-(perfluorooctyl)ethyl acrylate] (PFA-C(8)) as microparticles. The PFA-C(8) microparticles were prepared by the spontaneous self-organized microparticulation of PFA-C(8). The physical properties remained intact in the polymer morphology as confirmed by wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) measurements. The extremely low surface energy of PFA-C(8) provides a high solid-liquid spreading coefficient (S(S/L)) value for various combinations of liquids. As a result, liquid marbles were obtained from various liquids, unlike the case with other fluorine polymer particles such as poly(tetrafluoroethylene) (PTFE) and poly(vinilydene fluoride) (PVDF). These results suggest that the technique is widely applicable for preparing novel functional materials.