Observation of the "self-healing" of an error field island in the large helical device

It was observed that the vacuum magnetic island produced by an external error magnetic field in the large helical device shrank in the presence of plasma. This was evidenced by the disappearance of flat regions in the electron temperature profile obtained by Thomson scattering. This island behavior depended on the magnetic configuration in which the plasmas were produced.     

Study of Si(0 0 1)4 × 2-Ga structure by scanning tunneling microscopy and ab initio calculation

We have studied Si(0 0 1)-Ga surface structures formed at Ga coverages of slightly above 0.50 monolayer (ML) at 250 °C by scanning tunneling microscopy (STM). 4 × 2-, 5 × 2-, and 6 × 2-Ga structures were observed in a local area on the surface. The 4 × 2-Ga structure consists of three protrusions, as observed in filled- and empty-state STM images. The characters of these structures are clearly different from those of other Si(0 0 1)-Ga structures. We also performed an ab initio calculation of the energetics for several possible models for the 4 × 2-Ga structure, and clarified that the three-orthogonal-Ga-dimer model is the most stable. Also, the results of comparing the simulated STM images and observation images at various bias voltages indicate that this structural model is the most favorable.     

Strength characteristics of the self-sustained wave in grooved channels with different groove length

The self-sustained oscillations arising in a series of grooved channels are investigated experimentally. Pressure drop, time-averaged and time-various local pressure in the grooved channels with six kinds of groove length are measured with the differential transducer and the pressure sensor, respectively, and the flow structures are visualized using the aluminum dust method. The local pressure signal shows that the self-sustained wave appears in the first or second frequency, and the Strouhal number, based on the nature frequency of the self-sustained wave, is almost equivalent for the first or second frequency in the same channel. Meanwhile, the Strouhal number for each channel decreases monotonously with the groove length. Furthermore, it is found that increasing pressure will result in higher amplitude of the self-sustained wave, this behavior is significant for the efficient heat transfer in practical engineering.     

Anomalous thermochromic transition of poly(di‐n‐octylsilane)

The thermochromic behavior of poly(di‐n‐octylsilane) {[Si(C₈H₁₇)₂]_n; PDOS} was studied by ultraviolet (UV) absorption, differential scanning calorimetry, and X‐ray diffraction measurements. The structure of PDOS in the low‐temperature phase strongly depended on not only the temperature but also the rate of cooling, that is, the thermal history. Temperature‐dependent UV absorption spectra were highly dependent on thermal hysteresis. Cooled rapidly (10 K/min), PDOS showed two absorption peaks at 3.32 and 3.51 eV in low‐temperature‐ordered phases, whereas a single absorption peak at 3.32 eV became predominant with slow cooling (0.3 K/min). The appearance of the two peaks at low temperatures suggested that a mixture of different conformations was introduced by rapid cooling. A fiber diffraction pattern measured at 240 K after rapid cooling also showed evidence of the existence of novel conformation. A temperature‐dependent powder X‐ray diffraction pattern changed significantly between 270 and 280 K. Rapid cooling reduced the intensity of the X‐ray diffraction peak in this temperature region. This intensity change was explained by the conformational mixture in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1085–1092, 2001     

A modeling concept of a mechanical system having a piecewise linear spring property for its diagnosis

Machine condition monitoring and fault diagnosis of rotating machinery are very important because of the wide use of rotating machinery in industry. Couplings and gears are used in many mechanical systems to connect elements and transmit power. The system is usually modeled as a single-degree-of-freedom system with a piecewise linear spring property, where the mass of main machine is only considered. In the present study, the dynamic behavior of a system with an unsymmetrical nonlinearity and a significant mass of the connecting part was investigated both experimentally and by numerical simulation. In the experiment, a 1/3 sub-harmonic oscillation was observed, but this oscillation was not found in the simulation using a single-degree-of-freedom system, in which the mass of the connecting part was ignored. However, when a two-degrees-of-freedom system was used that considered both the mass of the connecting part and the impact property, the 1/3 sub-harmonic oscillation was observed. Thus it is recognized that an adequate mathematical model for diagnosis in the early stage of abnormality must be selected on the basis of the mass ratio between the connecting part and the main body.     

A Synthesis of the Tricyclic Core Structure of FR901483 Featuring an Ugi Four-Component Coupling and a Remarkably Selective Elimination Reaction

Three key reactions, an efficient Ugi four-component coupling, a regiospecific, base-mediated elimination reaction, and an intramolecular nitrone/alkene [3+2] cycloaddition, were used to achieve an effective synthesis of the tricyclic molecular framework of the immunosuppressant FR901483. The outcome of a control experiment supports the idea that an internal deprotonation by an alkoxide ion is the origin of the site selectivity observed in the base-induced elimination of hydroxy mesylate 17.     

Structural characterization of hierarchically porous alumina aerogel and xerogel monoliths

Detailed nanostructures have been investigated for hierarchically porous alumina aerogels and xerogels prepared from ionic precursors via sol–gel reaction. Starting from AlCl₃·6H₂O and poly(ethylene oxide) (PEO) dissolved in a H₂O/EtOH mixed solvent, monolithic wet gels were synthesized using propylene oxide (PO) as a gelation initiator. Hierarchically porous alumina xerogels and aerogels were obtained after evaporative drying and supercritical drying, respectively. Macroporous structures are formed as a result of phase separation, while interstices between the secondary particles in the micrometer-sized gel skeletons work as mesoporous structures. Alumina xerogels exhibit considerable shrinkage during the evaporative drying process, resulting in relatively small mesopores (from 5.4 to 6.2 nm) regardless of the starting composition. For shrinkage-free alumina aerogels, on the other hand, the median mesopore size changes from 13.9 to 33.1 nm depending on the starting composition; the increases in PEO content and H₂O/EtOH volume ratio both contribute to producing smaller mesopores. Small-angle X-ray scattering (SAXS) analysis reveals that variation of median mesopore size can be ascribed to the change in agglomeration state of primary particles. As PEO content and H₂O/EtOH ratio increase, secondary particles become small, which results in relatively small mesopores. The results indicate that the agglomeration state of alumina primary particles is influenced by the presence of weakly interacting phase separation inducers such as PEO.     

Uptake of transition metal ions using liposomes containing dicetylphosphate as a ligand.

The uptake of Cu2+ was investigated using various types of liposomes composed of phosphatidylcholine (PC), cholesterol (Chol) and dicethylphosphate (DCP). DCP played a role as a ligand for Cu2+. Multilamellar vesicles (MLVs) were more effective for the uptake of Cu2+ compared to unilamellar vesicles prepared by the extrusion technique. The uptake efficiency of MLVs for Cu2+ was dependent on the molar ratio of DCP in MLVs. The uptake percent of Cu2+ was 92% using MLVs having a PC:DCP:Chol molar ratio of 4:3:3; 95% of the total vesicle Cu2+ was bound to DCP of the outer membrane surface of the MLVs, and the remaining 5% of the total Cu2+ was distributed into the interior side of the MLVs. MLVs having a PC:DCP:Chol molar ratio of 4:3:3 were also effective as separation media for Mn2+, Co2+, Ni2+ and Zn2+. The uptake efficiency of the MLVs for the transition-metal ions increased in the order Co2+ < Zn2+ < Ni2+ < Mn2+ < Cu2+.