Heterogeneously catalyzed synthesis of primary amides directly from primary alcohols and aqueous ammonia

In the presence of a manganese oxide based octahedral molecular sieve (OMS-2), a range of primary amides could be synthesized directly from primary alcohols and ammonia. The observed catalysis was heterogeneous, and the recovered catalyst could be reused many times without an appreciable loss of its catalytic performance.     

KINETICS AND MECHANISM OF PHOTOCYCLOADDITION OF DEOXYURIDINES TO 2,3-DIMETHYL-2-BUTENE

The mechanism of photocycloaddition of 2′-deoxyuridine (1a) and thymidine (1b) to 2,3-dimethyl-2-butene (Bu) in acetonitrile by UV irradiation has been studied. The reciprocal quantum yield for the cycloaddition increased linearly with reciprocal concentrations of Bu in acetonitrile to give limiting quantum yields at infinite concentration of Bu as 0.030 and 0.0096 for 1a and 1b , respectively. This shows that the cycloaddition proceeds in a two-step mechanism between the triplet state of 1 and Bu through biradical intermediates. Addition of cis-1,3-pentadiene quenched the reaction obeying the Stern–Volmer equation. The above quenching experiments and laser transient spectroscopy revealed that the triplet state of 1a reacts with Bu with much larger rate constant (1.3–1.6 × 10⁹ M^?1 s^?1) than that of 1b (4–5 × 10⁷ M^?1 s^?1) reflecting larger steric hindrance exerted in the reaction of 1b than that of 1a .     

PEGylation of an artificial O2 and CO receptor: synthesis, characterisation and pharmacokinetic study

A synthetic oxygen (O(2)) and carbon monoxide (CO) receptor (hemoCD) composed of 5,10,15,20-tetrakis(4-sulfonatophenyl)porphinatoiron(ii) and a per-O-methylated β-cyclodextrin dimer with a pyridine linker (Py3CD) was functionalised with poly(ethylene glycol) (PEG) to elongate the circulation time of the receptor in the bloodstream. α-PEG monocarboxylic acid (HOOC(CH(2))(3)(CO)O-PEG(mw)-OCH(3); mw = 750 or 5k) or α,ω-PEG dicarboxylic acid (HOOC(CH(2))(3)(CO)O-PEG(mw)-O(CO)(CH(2))(3)COOH; mw = 10k or 20k) was reacted with the amino group of 5-(4-aminophenyl)-10,15,20-tris(4-sulfonatophenyl)porphyrin to afford a porphyrin monomer having a PEG chain or a porphyrin dimer having a PEG linker, respectively. The ferrous complexes of these PEGylated porphyrins (PEG750-, PEG5k-, PEG10k- and PEG20k-hemoCDs) bound O(2) in aqueous solution, P(1/2) values being 6.5-8.1 Torr at pH 7.0 and 25 °C. Each PEG(mw)-hemoCD was infused into the femoral vein of a Wistar male rat. After 6 h of the infusions, 67, 82, 86 and 42% of PEG750-, PEG5k-, PEG10k- and PEG20k-hemoCD were excreted in the urine. PEG750-hemoCD with a hydrodynamic diameter (D(h)) of 3.4 nm seemed to partly leak from the blood vessels (pore size: 2-6 nm) before renal filtration (pore size: 4-14 nm). PEG5k- (D(h) = 6.2 nm) and PEG10k-hemoCDs (9.0 nm) hardly passed through the blood vessels but were fully filtered by the kidney, resulting in high excretion rates. A considerable amount of PEG20k-hemoCD (D(h) = 12.0 nm) was retained in the blood even at 6 h after administration. The present study demonstrates that the behaviour of hemoCD in blood after administration can be controlled by modification of hemoCD with PEG having an appropriate molecular weight.     

Synthesis and structural revision of marine eicosanoid agardhilactone

Synthesis of the marine eicosanoid agardhilactone has been achieved. The relative and absolute configuration of agardhilactone was successfully determined.     

Versatile glycoblotting nanoparticles for high-throughput protein glycomics

We have developed an effective and practical trap-and-release method based on chemoselective ligation of carbohydrates with reactive aminooxyl groups attached to the surface of nanoparticles (referred to as glycoblotting nanoparticles). These glycoblotting nanoparticles were synthesized by UV irradiation of diacetylene-functionalized lipids that contain the aminooxyl group. The glycoblotting nanoparticles captured carbohydrates in aqueous solution under mild conditions and were collected by simple centrifugation. The trapped carbohydrates were effectively released from the nanoparticles under acidic conditions to give pure oligosaccharides. This glycoblotting process reduced the time required for the purification process of carbohydrates to less than 6 h, compared to the several days needed for conventional chromatographic techniques. The oligosaccharides (N-glycan) were released from ovalbumin (glycoprotein) by PNGase F after tryptic digestion. MALDI-TOF mass spectra before purification did not show any significant signals corresponding to N-glycans because these signals were hidden by the large signals of the abundant peptides. However, after purification with the glycoblotting nanoparticles, only signals corresponding to oligosaccharides appeared. We also demonstrated a clear analysis of the oligosaccharides contained in the mice dermis by means of glycoblotting.     

Reaction of Selenocarbonyl Compounds with Oxygen-Functionalized Conjugated Dienes

Selenoaldehydes and selenoketones, generated by thermal retro-Diels-Alder reaction of their cycloadducts with cyclopentadiene, reacted with oxygen-functionalized conjugated dienes such as 1-acetoxy-1,3-butadiene, Danishefsky's diene, and 1,4-diacetoxy-1,3-butadiene to give the corresponding cycloadducts in good yields regioselectively.     

Chiral bifunctional organocatalysts bearing a 1,3-propanediamine unit for the aza-MBH reaction

The introduction of a 1,3-propanediamine unit at the 3-position of (S)-BINOL using a methylene spacer led to the formation of a chiral bifunctional organocatalyst for the aza-Morita–Baylis–Hillman (aza-MBH) reaction. The organocatalyst 1k mediated aza-MBH transformations with high chemical yields and with up to 82% ee.     

Development of continuous process enabling nanofibrillation of pulp and melt compounding

Microfibrillated cellulose (MFC), a mechanically fibrillated pulp mostly consisting of nanofibrils, is a very attractive material because of its high elastic modulus and strength. Although much research has been done on composites of MFC and polypropylene (PP), it has been difficult to produce such composites at an industrial level because of the difficulties in using MFC in such composites are not only connected to the polarity (that can be improved with compatibilizers), but also with the challenge to make a homogeneous blend of the components, and also the low temperature stability of cellulose that could cause problems during processing. We developed a new processing method which enables continuous microfibrillation of pulp and its melt compounding with PP. Never-dried kraft pulp and powdered PP were used as raw materials to obtain MFC by kneading via a twin-screw extruder. Scanning electron microscopy showed nano to submicron wide fibers entangled in the powdered PP. MFC did not aggregate during the melt compounding process, during which the water content was evaporated. Maleic anhydride polypropylene (MAPP) was used as a compatibilizer to reinforce interfacial adhesion between the polar hydroxyl groups of MFC and non-polar PP. We investigated the effect of MAPP content on the mechanical properties of the composite, which were drastically improved by MAPP addition. Needle-leaf unbleached kraft pulp (NUKP)-derived MFC composites had better mechanical properties than needle-leaf bleached kraft pulp (NBKP)-derived MFC composites. Injection molded NUKP-derived MFC composites had good mechanical and thermal properties. The tensile modulus of 50 wt% MFC composite was two times, and the tensile strength 1.5 times higher than that of neat PP. The heat distortion temperature of 50 wt% MFC content composite under 1.82 MPa flexural load was increased by 53 °C, from 69 to 122 °C. This newly developed continuous process using powder resin has the potential for application at an industrial level.     

Organic–Inorganic Hybrid Gold Halide Perovskites: Structural Diversity through Cation Size

Crystal structures of a series of organic–inorganic hybrid gold iodide perovskites, formulated as A₂[Au^II₂][Au^IIII₄] [A=methylammonium (MA) ( 1 ) and formamidinium (FA) ( 2 )], A′₂[I₃]_1−x[Au^II₂]_x[Au^IIII₄] [A′=imidazolium (IMD) ( 3 ), guanidinium (GUA) ( 4 ), dimethylammonium (DMA) ( 5 ), pyridinium (PY) ( 6 ), and piperizinium (PIP) ( 7 )], systematically changed depending on the cation size. In addition, triiodide (I₃⁻) ions were partly incorporated into the AuI₂⁻ sites of 3 – 7 , whereas they were not incorporated into those of 1 and 2 . Such a difference comes from the size of the organic cation. Optical absorption spectra showed characteristic intervalence charge-transfer bands from Au^I to Au^III species, and the optical band gap increased as the size of the cation became larger.