New Strategy for Controlling Biodegradability of Biodegradable Polyesters by Enzyme‐Catalyzed Surface Grafting

A novel preparation method for the core‐shell type biodegradable polyesters or biodegradable materials grafted with biodegradable polyesters was developed by alkaline surface treatment of biodegradable polyester films and subsequent enzymatic polymerization of aliphatic lactones, one example of which is shown in this study, i.e., the preparation of poly(L ‐lactide) (PLLA) film grafted with poly(ε‐caprolactone). It is revealed that only alkaline surface treatment or the combination of alkaline surface treatment and enzyme‐catalyzed grafting, the former and the latter, respectively accelerating and delaying the enzymatic degradation of PLLA, will give PLLA materials having a wide variety of biodegradability. Also, the specificity of the enzyme used for hydrolysis could be used to confirm the grafted chain species.

     

Stabilization of the Parametric Resonance of a Cantilever Beam by Bifurcation Control with a Piezoelectric Actuator

In this work, bifurcation control using a piezoelectric actuator isimplemented to stabilize the parametric resonance induced in acantilever beam. The piezoelectric actuator is attached to the surfaceof the beam to produce a bending moment in the beam. The dimensionlessequation of motion for the beam with the piezoelectric actuator on itssurface is derived and the modulation equations for the complexamplitude of an approximate solution are obtained using the method ofmultiple scales. We then acquire the bifurcation set that expresses theboundary of the stable and unstable regions. The bifurcation set ischaracterized by the modulation equations. Next, we determine the orderof feedback gains to modify these modulation equations. By actuating thepiezoelectric actuator under the appropriate feedback, bifurcationcontrol is carried out resulting in the shift of the bifurcation set andthe expansion of the stable region. The main characteristic of thestabilization method introduced above is that the work done by thepiezoelectric actuator is zero in the state where the parametricresonance is stabilized. Thus zero power control is realized in such astate. Experimental results show the validity of the proposedstabilization method for the parametric resonance induced in thecantilever beam.     

Compatibility and universality of the retention prediction system for polycyclic aromatic hydrocarbons in reversed-phase liquid chromatography

Summary System-compatibility and universality of the retention prediction concept has been investigated for polycyclic aromatic hydrocarbons in reversed-phase liquid chromatography. The results clearly indicate that the retention prediction approach has a very high potential for optimization of separation conditions in almost all reversed-phase systems, and allows more precise and rapid analysis. This approach may be one of the best optimization techniques, because the system does not require any standard materials.     

Surface Hydrophilicities and Enzymatic Hydrolyzability of Biodegradable Polyesters, 2

Control of the surface hydrophilicities and enzymatic hydrolyzability of hydrophobic aliphatic polyesters such as poly(ε‐caprolactone) (PCL) and poly(L ‐lactide) [i.e. poly(L ‐lactic acid) (PLLA)] was attempted by coating with hydrophilic poly(vinyl alcohol) (PVA). The PVA coating was carried out by immersion of the PCL and PLLA films in PVA solutions. The effects of PVA coating on the hydrophilicities were monitored by dynamic contact angle measurements, while the enzymatic hydrolyzability of the PVA‐coated PCL and PLLA films was evaluated by the weight losses after Rhizopus arrhizus lipase‐ and proteinase K‐catalyzed hydrolysis, respectively. It was found that the PVA coating successfully enhanced the hydrophilicities of the aliphatic polyester films and significantly suppressed enzymatic hydrolyzability of the aliphatic polyester films, excluding the PCL film coated at a very low concentration such as 0.01 g · dL^?1 and the crystallized PLLA film coated at 1 g · dL^?1, for which slight enhancement and no significant enhancement, respectively, were observed in the enzymatic hydrolyzability. Moreover, the hydrophilicities and enzymatic hydrolyzability of the aliphatic polyester films were controllable to some extent by varying the PVA solution concentration and the film crystallinity.

Advancing contact angle (θ_a) of PCL, PLLA‐C, and PLLA‐A films before and after the PVA coating by immersion in 1 g · dL^?1 solution.     

Controlling the incorporation and release of C60 in nanometer-scale hollow spaces inside single-wall carbon nanohorns

We succeeded in large-scale preparation of single-wall carbon nanohorns (SWNH) encapsulating C60 molecules in a liquid phase at room temperature using a "nano-precipitation" method, that is, complete evaporation of the toluene from a C60-SWNH-toluene mixture. The C60 molecules were found to occupy 6-36% of the hollow space inside the SWNH, depending on the initial quantity of C60. We showed that the C60 in C60@SWNHox was quickly released in toluene, and the release rate decreased by adding ethanol to toluene. Numerical analysis of the release profiles indicated that there were fast and slow release processes. We consider that the incorporation quantity and the release rate of C60 were controllable in/from SWNHs because SWNHs have large diameters, 2-5 nm.     

Extensive oxygen exchange between carbon dioxide and magnesium oxide surface

Temperature-programmed desorption study of C¹⁸O₂ adsorbed on MgO has revealed that the desorbed carbon dioxide is composed exclusively of C¹⁶O₂, indicating that the adsorbed CO₂ species roll over the MgO surface.     

Alkaline and enzymatic degradation of L-lactide copolymers, 1. Amorphous-made films of L-lactide copolymers with D-lactide, glycolide, and epsilon-caprolactone

Films of poly(L-lactide) [i.e., poly(L-lactic acid) (PLLA)] and L-lactide copolymers with glycolide [P(LLA-GA)(81/19)], epsilon-caprolactone [P(LLA-CL)(82/18)], D-lactide [P(LLA-DLA)(95/5), (77/23), and (50/50)] were prepared and a comparative study on the effects of comonomer type and content on alkaline and proteinase K-catalyzed hydrolyses of the films was carried out. The hydrolyzed films were investigated using gravimetry (weight loss and water absorption), differential scanning calorimetry (DSC), polarimetry, and gel permeation chromatography (GPC). To exclude the effects of molecular weight and crystallinity on the hydrolysis, the films were prepared from polymers having similar molecular weights and made amorphous by melt-quenching. It was found that incorporation of hydrophilic glycolide units in L-lactide chains raises the alkaline and enzymatic hydrolyzabilities, whereas incorporation of hydrophobic epsilon-caprolactone units in L-lactide chains reduces the alkaline and enzymatic hydrolyzabilities. On the other hand, incorporation of D-lactide units with the same hydrophilicity of L-lactide units increases the alkaline hydrolyzability but decreases the enzymatic hydrolyzability. The alkaline hydrolyzability of the films of L-lactide copolymers with different kinds of comonomers and P(LLA-DLA) with different D-lactide unit contents can be closely related to their hydrophilicity. On the other hand, the enzymatic hydrolyzability of L-lactide copolymer films with different kinds of comonomers is mainly determined by hydrophilicity, while that of P(LLA-DLA) films is determined by the averaged L-lactyl and D-lactyl unit sequence lengths. The catalytic effect of proteinase K relative to that of alkali on the hydrolysis of P(LLA-DLA)(77/23) and P(LLA-GA)(81/19) films normalized by that of PLLA was lower than unity, whereas the normalized relative catalytic effect of proteinase K on the hydrolysis of P(LLA-CL)(82/18) film was higher than unity, meaning that despite low absolute alkaline and enzymatic hydrolyzability of the P(LLA-CL)(82/18) film, the catalytic effect of proteinase K may be maintained for this copolymer film, probably because of its blocky structure.     

Electron spin resonance spectra observed in the course of grafting iron carbonyls on sodium-Y zeolites

The adsorption and/or decomposition pathway of Fe₂(CO)₉ or Fe₃(CO)₁₂ on hydrated or dehydrated NaY zeolites has been studied by an ESR technique. The adsorption resulted in the formation of three paramagnetic species withg _iso=2.0450, 2.0378, and 2.0016, which were attributable to Fe₃(CO)₁₁ ^–, Fe₂(CO)₈ ^–, and Fe(CO)₄ ^– anion radicals, respectively. These radicals have been suggested as intermediates in the formation of HFe₃(CO)₁₁ ^– on the hydrated NaY zeolite and Fe₃(CO)₁₂ on the dehydrated NaY zeolite.     

Synthesis of enol and vinyl esters catalyzed by an iridium complex

Enol and vinyl esters were successfully synthesized by the use of an iridium complex as a catalyst. The reaction of carboxylic acids with terminal alkynes in the presence of catalytic amounts of [Ir(cod)Cl]₂ and Na₂CO₃ gave the corresponding 1-alkenyl esters. The addition of carboxylic acids to alkynes principally took place in the Markovnikov fashion. In addition, by the use of an Ir complex combined with NaOAc various vinyl esters were prepared through the transvinylation between carboxylic acids and vinyl acetate.     

Diastereoselective intermolecular radical addition to nitrones

The intermolecular radical addition to chiral nitrones 2, 4, 5, and 16 was studied. The isopropyl radical addition to Oppolzer's camphorsultam derivative 2 of glyoxylic nitrone proceeded with excellent diastereoselectivity to give the desired isopropylated product 3a accompanied by the diisopropylated product 3b. A high degree of stereocontrol in the reaction of cyclic nitrone 4 was achieved. The ethyl radical addition to nitrone 4 with triethylborane afforded the desired ethylated product 9a accompanied by the diethylated product 10a and the ethylated nitrone 11a. To evaluate the utility of cyclic nitrone 4, several alkyl radicals were employed in the addition reaction, which afforded the alkylated products 9b-d with excellent diastereoselectivities. In the presence of Mg(ClO(4))(2), the ethyl radical addition to BIGN 16 afforded selectively syn isomers. In contrast, the alkyl radical addition to 16 took place even in the absence of Lewis acid to give anti isomers.