π-Allyl nickel halide–oxygen system as a catalyst for polymerization of butadiene

The π-allyl nickel halide-oxygen system was found to be active as catalyst for stereospecific polymerization of butadiene. The catalyst from π-allyl nickel chloride or π-allyl nickel bromide yields the polymer of 90% cis-1,4 content with high activity, whereas the catalyst from π-allyl nickel iodide affords a polymer of 70% or less cis-1,4 content. The catalyst systems can be fractionated into two parts on the basis of solubility in benzene. It is concluded that the catalyst activity originates essentially from the benzene-insoluble nickel complex which is composed of oxygen, halogen, σ-allyl group, and nickel. The structure of growing polymer terminal is discussed in relation to the mechanism of the stereospecific polymerization.     

Absorption enhancement of polypeptide drugs by cyclodextrins. I. Enhanced rectal absorption of insulin from hollow-type suppositories containing insulin and cyclodextrins in rabbits.

The absorption of insulin (from porcine pancreas) from the rectum of rabbits after the administration of hollow-type suppositories containing insulin and five kinds of cyclodextrins (CyDs) was investigated. Three types of suppositories were employed: suppository I containing insulin (approximately 26 IU/mg) and various amounts of each CyD in citric buffer solution at pH 3.0 or powder in its cavity, suppository II containing CyD without insulin, and suppository III containing insulin without CyD. Without CyD, the insulin and glucose levels in plasma were unchanged, whereas a significant increase in the plasma insulin concentration and a marked decrease in the glucose levels were found following simultaneous administration of insulin and CyDs by suppository I. The enhancing effect of CyD on rectal insulin absorption (absorption-enhancing effect) by chemically modified CyDs (heptakis(2,6-di-O-methyl)-beta-CyD (DM-beta-CyD) and 2-hydroxypropyl-beta-CyD (HP-beta-CyD)) was higher than those by natural CyDs (alpha-, beta-, and gamma-CyD). The area under the plasma concentration-time curve (AUC) and Cmax of insulin significantly decreased with the preadministration (administration of CyD 6, 24 and 48 h before rectal insulin administration) of DM-beta-CyD. The absorption-enhancing effect disappeared 24 h after preadministration. These results suggest that CyDs enhance insulin absorption from the rectum, and that attenuation of the membrane transport barrier function in the rectum recovers at a maximum of 24 h after administration of CyDs.     

Snytheses of analgesics. Part XXXVII. An alternative synthesis of 1,2,3,4, 5, 6-hexahydro-8-hydroxy-2,6-methano-6, h-dimethyl-3-phenethyl-3-benzazoeine [studies on the syntheses of heterocyclic compounds. Part DXXI]

Acid treatment of the alkylated products of (Va, Vb, and VIII) of piperidinols IVa and IVb, and tetrahydropyridine VII with β-bromoethylbenzene, afforded 1,2,3,4,5,6-hexahydro-8-hydroxy-2,6-methano-6,1 1-dimethyl-3-phenethyl-3-benzazocine (la) in good yield. Piperidinols Va and Vb were also obtained from the reaction of N-(3-methyl-3-pentenyl)-β-phenethylamine (IIb) with methyl 3-(4-methoxyphenyl)-2,3-epoxypropionate.     

N,N-Diethyl-3-toluamide Formulation Based on Ethanol Containing 0.1% 2-Hydroxypropyl-β-cyclodextrin Attenuates the Drug’s Skin Penetration and Prolongs the Repellent Effect without Stickiness

N,N-diethyl-3-toluamide (DEET) is one of the most widely used insect repellents in the world. It was reported that a solution containing 6–30% cyclodextrin (CD) as a solvent instead of ethanol (EtOH) provided an enhancement of the repellent action time duration of the DEET formulation, although the high-dose CD caused stickiness. In order to overcome this shortcoming, we attempted to prepare a 10% DEET formulation using EtOH containing low-dose CDs (β-CD, 2-hydroxypropyl-β-CD (HPβCD), methyl-β-CD, and sulfobutylether-β-CD) as solvents (DEET/EtOH/CD formulations). We determined the CD concentration to be 0.1% in the DEET/EtOH/CD formulations, since the stickiness of 0.1% CDs was not felt (approximately 8 × 10⁻³ N). The DEET residue on the skin superficial layers was prolonged, and the drug penetration into the skin tissue was decreased by the addition of 0.1% CD. In particular, the retention time and attenuated penetration of DEET on the rat skin treated with the DEET/EtOH/HPβCD formulation was significantly higher in comparison with that of the DEET/EtOH formulation without CD. Moreover, the repellent effect of DEET was more sustained by the addition of 0.1% HPβCD in the study using Aedes albopictus. In conclusion, we found that the DEET/EtOH/HPβCD formulations reduced the skin penetration of DEET and prolonged the repellent action without stickiness.     

Isolation,Diversity and Characterization of Ulvan-Degrading Bacteria Isolated from Marine Environments

In this study, we aimed to isolate bacteria capable of degrading the polysaccharide ulvan from the green algae Ulva sp. (Chlorophyta, Ulvales, Ulvaceae) in marine environments. We isolated 13 ulvan-degrading bacteria and observed high diversity at the genus level. Further, the genera Paraglaciecola, Vibrio, Echinicola, and Algibacter, which can degrade ulvan, were successfully isolated for the first time from marine environments. Among the 13 isolates, only one isolate (Echinicola sp.) showed the ability not only to produce externally expressed ulvan lyase, but also to be periplasmic or on the cell surface. From the results of the full-genome analysis, lyase was presumed to be a member of the PL25 (BNR4) family of ulvan lyases, and the bacterium also contained the sequence for glycoside hydrolase (GH43, GH78 and GH88), which is characteristic of other ulvan-degrading bacteria. Notably, this bacterium has a unique ulvan lyase gene not previously reported.     

Spontaneous ignition temperature for the compacted mixture of Ni–Al system: Experiment,theory, and comparisons

Spontaneous ignition of compacted mixture has been examined not only experimentally but also theoretically, relevant to materials synthesis for Ni–Al system. Spontaneous ignition temperature, determined from the inflection-point of the temporal variation of surface temperature, is found to decrease at first, reach the minimum, and then increase gradually, with increasing size ratio, being defined as the ratio of compact and particle diameters and reported to be useful in correlating experimental results. The lowest temperature observed is as low as that, more than 200 K below the melting point 934 K of Al, at the size ratio of c.a. 700. While its decrease is attributed to the increase in the particle surface per unit spatial volume of compacted mixture, as reported in the literature, its increase found in the course of the present study can fairly be correlated to an enhancement of heat loss from each particle in the compacted mixture, by conducting a theoretical consideration. As for the dependence of spontaneous ignition temperature on the mixture ratio, a shifting occurs from a decreasing trend with increasing mixture ratio at small size ratios, less than about 700, to an insensitive trend to the mixture ratio, had not been reported in the literature. In addition, a fair degree of agreement, shown in experimental comparisons with theoretical results, indicates that the present formulation has captured the essential features of the spontaneous ignition of compacted mixture, especially for size ratios with large values. Since this kind of particle size effects, relevant to the spontaneous ignition of the compacted mixtures, has not been captured in the previous studies, its elucidation can be considered not only notable but also useful, in manipulating combustion process in materials synthesis, especially, in choosing a specific condition for the lowest spontaneous ignition temperature by varying the size ratio.     

Raman probe using a single hollow waveguide

A simple Raman probe was realized using a single flexible hollow waveguide (HW). A HW coated with a silver film, which had reasonable transmission and little optical background noise, was used as a bidirectional transmission fiber for both the excitation and collection of Raman scattered light. The HW itself generated no Raman scattering or fluorescence noise during transmission. A complex filtering system at the end of the waveguide was thus unnecessary. In addition, the measured Raman spectra showed better signal-to-noise ratios than a conventional Raman fiber probe. The HW's suitability as a Raman fiber probe was also demonstrated.     

Achievement of a 920-MHz high resolution NMR

We have developed a 920-MHz NMR system and performed the proton NMR measurement of H(2)O and ethylbenzene using the superconducting magnet operating at 21.6 T (920 MHz for proton), which is the highest field produced by a superconducting NMR magnet in the persistent mode. From the NMR measurements, it is verified that both homogeneity and stability of the magnet have a specification sufficient for a high resolution NMR.     

Application of pressure sensitive paint measurement to a low-solidity cascade diffuser of a transonic centrifugal compressor

A pressure sensitive paint (PSP) measurement has been known as a pressure field measurement technique based on the oxygen quenching phenomenon of luminescence of specific luminophores. A PSP measurement was applied for pressure field measurement in a low-solidity circular cascade diffuser of a single-stage transonic centrifugal compressor with 5 in pressure ratio for HFC134a gas. The oxygen concentration was about 500 ppm. Ru (bath-phen) was adsorbed on a silica-gel thinlayer chromatography sheet, and the sheet was pasted onto the side-wall between the cascade vanes. A drastic change in luminescent intensity was recognized during a surge condition. Also the pressure variations based on luminescent intensity agreed well with the pressure fluctuations measured using a semiconductor pressure sensor with high-frequency-response. It was shown that a PSP measurement worked well to investigate the unsteady pressure fields in a circular cascade diffuser of a transonic centrifugal compressor. Moreover, the time response of PSP becomes clear as a problem to be overcome for the present.