Effect of intramolecular pi-pi and CH-pi interactions between ligands on structure, electrochemical and spectroscopic properties of fac-[Re(bpy)(CO)3(PR3)]+(bpy = 2,2'-bipyridine; PR3= trialkyl or triarylphosphines)

Intramolecular pi-pi and CH-pi interactions between the bpy and PR3 ligands of fac-[Re(bpy)(CO)3(PR3)]+ affect their structure, and electrochemical and spectroscopic properties. Intramolecular CH-pi interaction was observed between the alkyl groups on the phosphine ligand (R =nBu, Et) and the bpy ligand, and intramolecular pi-pi and CH-pi interactions were both observed between the aryl group(s) on the phosphorus ligand (R =p-MeOPh, p-MePh, Ph, p-FPh, OPh) and the bpy ligand, while no such interactions were found in the trialkylphosphite complexes (R = OiPr, OEt, OMe). The intramolecular interactions distort the pyridine rings of the bpy ligand as long as 3.7 x 10(-2)A in crystals. Molecular orbital calculations of the bpy ligand suggest that this distortion decreases the energy gap between its pi and pi* orbitals. An absorption band attributed to the pi-pi*(bpy) transition of the distorted rhenium complexes, measured in a KBr pellet, was red-shifted by 1-5 nm compared to the complexes without the distorted bpy ligand. Even in solution, similar red shifts of the pi-pi*(bpy) absorption were observed. The redox potential E1/2(bpy/bpy*-) of the complexes with the trialkylphosphine and triarylphosphine ligand are shifted positively by 110-120 mV and 60-80 mV respectively, compared with those derived from the electron-attracting property of the phosphorus ligand. In contrast with these properties, three nu(CO) IR bands, which are sensitive to the electron density on the central rhenium because of pi-back bonding, were shifted to higher energy, and a Re(I/II)-based oxidation wave was observed at a more positive potential according to the electron-attracting property of the phosphorus ligand.     

Morphological and structural characteristics of diazo dyes at the air-water interface: in situ Brewster angle microscopy and polarized UV/vis analysis

A morphological analysis is presented for Langmuir films of the diazo dyes Sudan 4 (S4), Sudan 3 (S3), and Sudan red (SR), using Brewster angle microscopy. Stable nonmonomolecular structures are formed at the air-water interface denoted as a plateau in the pressure-area isotherms. Monolayer domains are evident by the contrastless image even before the pressure onset, which grow in size until it reached a condensed monolayer. This behavior resembles that of Langmuir films from simple aromatic fatty acids. Films from all the azo dyes display similar features, according to the surface potential isotherms and in situ polarized UV/vis spectroscopy except for the larger area per molecule occupied by S4 and SR. This is attributed to the presence of CH(3) groups that cause steric hindrance modifying the organization of diazo dye molecules at the air-water interface. UV/vis polarized absorption spectroscopy showed preferential orientation of S4 and S3 on the water surface, while SR molecules lie isotropically. For these three diazo dyes, film absorption was negligible at very large areas per molecule, becoming nonzero only at a critical area coinciding with the onset of surface potential. The critical area is ascribed to the formation of a H-bonded network between water molecules and diazo dye headgroups.     

Aromaticity of planar boron clusters confirmed

Low-energy boron clusters are characterized by two-dimensional geometry. Aromaticity of these planar boron clusters was established in terms of topological resonance energy (TRE). All planar boron clusters were found to be highly aromatic with large positive TREs even if they have 4n pi-electrons. Aromaticity must therefore be the origin of unusual planar or quasi-planar geometry. Thus, the aromaticity concept is as useful in boron chemistry as it is in general organic chemistry. It is evident that the Hückel 4n + 2 rule of aromaticity should not be applied to such polycyclic pi-systems. Some of the boron clusters are in the triplet electronic state to attain higher aromaticity. Multivalency and electron deficiency of boron atoms are responsible for lowering the energies of low-lying pi molecular orbitals and then for enhancing aromaticity. For polycyclic pi-systems, paratropicity does not always indicate antiaromaticity.     

Subsecond separation of cellular flavin coenzymes by microchip capillary electrophoresis with laser-induced fluorescence detection

In this article, it was demonstrated that a subsecond separation of cellular metabolites such as riboflavin (RF), flavin mononucleotide (FMN), and flavin-adenine dinucleotide (FAD) was achieved using microchip capillary electrophoresis with laser-induced fluorescence detection. The influences of crucial parameters that governed analysis time (e.g., channel length and electric field for separation) and separation resolution (e.g., sample size) were investigated, both in theoretical aspects and experimental practice. Quantitative analyses were performed that exhibited linear dynamic range of two orders of magnitude, with calculated detection limits of 34, 201, and 127 nM for RF, FAD, and FMN, respectively. To test the validity of the method, it was successfully applied to characterize several recombinant flavin-binding domains in a human neuronal nitric oxide synthase.     

Heat capacity measurements of MnxFe3−xO4

Heat capacities of Mn_xFe_3?xO₄ with the composition x = 1.0, 1.5, and 2.0 were measured from 200 to 740 K. λ-type heat capacity anomalies due to the ferri-paramagnetic transition were observed for all the compositions. The transition temperatures were 577, 471, and 385 K for the composition x = 1.0, 1.5 and 2.0, respectively, which are in good agreement with the results of magnetic measurements. The difference in heat capacities between the different samples was small except for the temperature range of the transition. The magnetic contribution to the observed heat capacity was obtained by assuming that the heat capacity can be expressed by the sum of the lattice heat capacity C_v (l), the dilation contribution C(d), and the magnetic contribution C(m). Entropy changes due to the transition were obtained from C(m) as 55.5, 50.7 and 49.2 J K^?1 mole^?1 for the composition x = 1.0, 1.5, and 2.0, respectively. The entropy changes were also calculated by assuming the randomization of unpaired electron spins on each ion, but they were from 6 to 10 J K^?1 mole^?1 smaller than the observed ones. The difference between the experimental and the calculated values is roughly explained by taking into account the cation exchange reaction between the tetrahedral and the octahedral sites in the spinel structure.     

Cytotoxic diterpenoids from Vietnamese medicinal plant Croton tonkinensis GAGNEP

Six new ent-kaurane-type diterpenoids were isolated from the leaves of the endemic Vietnamese medicinal plant Croton tonkinensis GAGNEP. (Euphorbiaceae) together with three known ent-11alpha-acetoxy-7beta,14alpha-dihydroxykaur-16-en-15-one (1), ent-kaur-16-en-15-one 18-oic acid (5) and ent-18-hydroxykaur-16-ene (7). Their structures were determined by spectroscopic analyses to be ent-7beta-acetoxy-11alpha-hydroxykaur-16-en-15-one (2), ent-18-acetoxy-11alpha-hydroxykaur-16-en-15-one (3), ent-11alpha-acetoxykaur-16-en-18-oic acid (4), ent-15alpha,18-dihydroxykaur-16-ene (6), ent-11alpha,18-diacetoxy-7beta-hydroxykaur-16-en-15-one (8), and ent-(16S)-1alpha,14alpha-diacetoxy-7beta-hydroxy-17-methoxykauran-15-one (14). ent-Kaurane-type diterpenoids from Croton tonkinensis 2-4, 6, and 9-13, were tested for toxicity in the brine shrimp lethality assay. Compounds 9, 10, and 12 demonstrated significant activity, compounds 2, 3, 6, and 11 showed weak activity, and compounds 4 and 13 were inactive.     

The effect of the counteranion on the formation of mesoporous materials under the acidic synthesis process

The presence of various counteranions at the interfacial region of the silicate-surfactant mesophase introduces opportunities for manipulation of the phase structure. Well-ordered 3D-hexagonal P63/mmc, cubic Pmn, 2D-hexagonal p6mm, and cubic Iad mesoporous materials have been synthesized with the same surfactant, cetyltriethylammonium bromide, in the presence of various acids. The counteranions of acidic media have resulted in increasing the surfactant packing parameter g in the order SO42- < Cl- < Br- < NO3-, which leads to the different time course of formation of mesostructures. The effect of counteranions on the formation of mesostructures is explained in terms of not only the adsorption strength on the headgroups of the surfactant micelle but also the rate of silica condensation affecting the charge density matching between the surfactant and silica. It has been found that the mesophase is always transformed from the larger g parameter into the smaller one. The distinct morphologies of the 3D-hexagonal P63/mmc mesophases have been rationally explained by supposing this particular mesostructure. The cubic Iad phase has been first synthesized under acidic conditions.     

Single crystal EPR studies of the reduced active site of [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F

In the catalytic cycle of [NiFe] hydrogenase the paramagnetic Ni-C intermediate is of key importance, since it is believed to carry the substrate hydrogen, albeit in a yet unknown geometry. Upon illumination at low temperatures, Ni-C is converted to the so-called Ni-L state with markedly different spectroscopic parameters. It is suspected that Ni-L has lost the "substrate hydrogen". In this work, both paramagnetic states have been generated in single crystals obtained from the [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F. Evaluation of the orientation dependent spectra yielded the magnitudes of the g tensors and their orientations in the crystal axes system for both Ni-C and Ni-L. The g tensors could further be related to the atomic structure by comparison with the X-ray crystallographic structure of the reduced enzyme. Although the g tensor magnitudes of Ni-C and Ni-L are quite different, the orientations of the resulting g tensors are very similar but differ from those obtained earlier for Ni-A and Ni-B (Trofanchuk et al. J. Biol. Inorg. Chem. 2000, 5, 36-44). The g tensors were also calculated by density functional theory (DFT) methods using various structural models of the active site. The calculated g tensor of Ni-C is, concerning magnitudes and orientation, in good agreement with the experimental one for a formal Ni(III) oxidation state with a hydride (H(-)) bridge between the Ni and the Fe atom. Satisfying agreement is obtained for the Ni-L state when a formal Ni(I) oxidation state is assumed for this species with a proton (H(+)) removed from the bridge between the nickel and the iron atom.     

Why are viscosities lower for ionic liquids with -CH2Si(CH3)3 vs -CH2C(CH3)3 substitutions on the imidazolium cations?

We have prepared novel room temperature ionic liquids (RTILs) with trimethylsilylmethyl (TMSiM)-substituted imidazolium cations and compared the properties of these liquids with those for which the TMSiM group is replaced by the analogous neopentyl group. The ionic liquids are prepared with both tetrafluoroborate (BF(4)(-)) and bis(trifluoromethylsulfonyl)imide (NTf(2)(-)) anions paired with the imidazolium cations. At 22 degrees C, the TMSiM-substituted imidazolium ILs have shear viscosities that are reduced by a factor of 1.6 and 7.4 relative to the alkylimidazolium ILs for the NTf(2)(-) and BF(4)(-) anions, respectively. To understand the effect of silicon substitution on the viscosity, the charge densities have been calculated by using density functional theory electronic structure calculations. The ultrafast intermolecular, vibrational, and orientational dynamics of these RTILs have been measured by using femtosecond optical heterodyne-detected Raman-induced Kerr effect spectroscopy (OHD-RIKES). The intermolecular dynamical spectrum provides an estimate of the strength of interactions between the ions in the RTILs, and provides a qualitative explanation for the observed reduction in viscosity for the silicon-substituted RTILs.