First-principles calculations of 17O nuclear magnetic resonance chemical shielding in Pb(Zr(1/2)Ti(1/2))O3 and Pb(Mg(1/3)Nb(2/3))O3: linear dependence on transition-metal/oxygen bond lengths

First-principles density functional theory oxygen chemical shift tensors were calculated for A(B,B')O(3) perovskite alloys Pb(Zr(1/2)Ti(1/2))O(3) (PZT) and Pb(Mg(1/3)Nb(2/3))O(3) (PMN). Quantum chemistry methods for embedded clusters and the gauge including projector augmented waves (GIPAW) method [C. J. Pickard and F. Mauri, Phys. Rev. B 63, 245101 (2001)] for periodic boundary conditions were used. Results from both methods are in good agreement for PZT and prototypical perovskites. PMN results were obtained using only GIPAW. Both isotropic δ(iso) and axial δ(ax) chemical shifts were found to vary approximately linearly as a function of the nearest-distance transition-metal/oxygen bond length, r(s). Using these results, we argue against Ti clustering in PZT, as conjectured from recent (17)O NMR magic-angle-spinning measurements. Our findings indicate that (17)O NMR measurements, coupled with first-principles calculations, can be an important probe of local structure in complex perovskite solid solutions.     

Stability of Plasma Treated Non-vulcanized Polybutadiene Surfaces: Role of Plasma Parameters and Influence of Additives

Surface modification studies of non-vulcanized BR elastomers (butadiene rubber) by low-pressure air plasma treatment and the effect on ageing and adhesion performances are presented in this paper. In particular, the influence of discharge power and distance from the glow discharge, and impact of antioxidant molecules in the BR formulation were examined. To characterize the changes to the BR surface, XPS spectroscopy, contact angle measurements, AFM nanoindentation experiments and tack measurements were utilized. Oxidation and crosslinking were the main mechanisms observed on the polymer chains regardless of the plasma conditions used. Beyond a certain threshold of plasma energy (in our case, discharge power of ~60 W and exposure time of ~30 s), a steady state was reached irrespective of the distance from the glow discharge. The presence of antioxidant molecules considerably reduced crosslinking phenomena while maintaining oxidation processes on polymer chains and increasing the nitrogen content in the near surface region. The mechanisms responsible for these differences have been identified. Interestingly, the COOH/C=O ratio changed according to the balance between oxidation and crosslinking. The hydrophobic recovery rate was mainly driven by temperature-dependent dynamics and varied according to the degree of crosslinking in the surface region. It was found to be lower in air atmosphere in the presence of antioxidant molecules. Finally, the presence of antioxidant molecules in the BR formulation allowed the adhesion performances after plasma exposure to significantly increase.     

Thermal and odd–even behaviour in a homologous series of lithium n-alkanoates

Thermotropic phase transition temperatures, enthalpies and entropies of phase changes and odd–even alternation, in a homologous series of anhydrous lithium n-alkanoates, LiC_nH_2n?1O₂ (LiC_8–19 inclusive), have been investigated by differential scanning calorimetry (d.s.c.), hot stage polarizing microscopy and solid state ¹³C NMR spectroscopy. The number of phases observed, between the room temperature microcrystalline solid and isotropic melt, shows a clear dependence on chain length. For LiC_8–13, only one intermediate lamellar II crystalline phase is observed. For LiC_14–19, a lamellar II and high temperature phase are evident. The high temperature phase is characterized by pre-melting and disordering of hydrocarbon chains as they change from nearly all-trans to one with increased gauche conformers. It is probably a solid rotator phase. Odd–even alternation in melting temperature, density and some thermodynamic data result from the relative distance between methyl groups, from opposite layers in a bi-layer. Molecular models indicate that the methyl groups in odd chains are more favourably orientated which lead to a more energetically favoured staggered conformer. As a consequence, the methyl groups, for odd chains, are in closer proximity than even chains. This subtle change in the molecular lattice could account for the presence of polymorphic structures on cooling from the melt.     

EFFECT OF METAL IONS ON THE LUMINESCENCE OF ACRIDINE DYES BOUND TO DNA

Abstract— The luminescence of acridine dyes intercalated in DNA was studied as a function of the concurrent binding of metal ions to DNA, in an effort to deduce specific site interactions of the dyes. Two dyes, proflavine (PF) and acridine orange (AO), and two metal ions, silver and mercuric, were used. Both ions quench the fluorescence of the dyes in aqueous solution at room temperature. The metal ions have a different effect on the fluorescence of these dyes when they are intercalated between the base pairs of DNA. The fluorescence of AO is decreased when silver is bound, while the fluorescence of PF is enhanced. Since Ag⁺ initially binds to GC sites in DNA, which quench the PF fluorescence, it ostensibly 'turns off' the quenching by DNA at these sites, and this effect is greater than the quenching effect of the silver ion itself. Hg²⁺ ion initially binds to AT sites in DNA. Since both dyes fluoresce from AT sites, Hg²⁺ is expected to quench their fluorescence. This behavior is observed at low r (metal ion/base). At higher r values, however, where Hg²⁺ is expected to begin binding to GC sites, the fluorescence of PF is enhanced. These quenching turn-off effects are tentatively interpreted in terms of a change in the structure of the dye/DNA complex which occurs when a metal ion binds at the intercalation site. At 77 K. no fluorescence enhancement is observed when metal ions bind; Ag⁺ quenches the fluorescence and enhances the phosphorescence of both dyes. Qualitatively similar results are obtained with Hg²⁺.     

Geometry and force constant determination from correlated wave functions for polyatomic molecules: Ground states of H2O and CH2

Ab initio calculations including electron correlation are reported for the water and methylene molecules as a function of geometry. A large contracted gaussian basis set is used and the multiconfiguration wave functions, optimized by the iterative natural orbital procedure, include 277 and 617 configurations for H₂O and CH₂ respectively. The method of selecting configurations, yielding first-order wave functions, is discussed in some detail. For H₂O, the SCF geometry is r=0,942 Å, =105,8°, the correlated result is r=0,968 Å, =103,2°, and the experimental r=0,957 Å, =104,5°. The water stretching force constants, in millidynes/Å, are 8,72 (SCF), 8,75 (CI), and 8,4 (experiment). Bending force constants are 0,88 (SCF), 0,83 (CI), and 0,76 (experiment). For methylene the SCF geometry is r=1,072 Å, =129,5°, while the result from first-order wave functions is r=1,088 Å, =134°. The predicted CH₂ force constants are 6,16 (SCF) and 6,13 (CI) for stretching and 0,44 (SCF) and 0,33 (CI) for bending.

---

Zusammenfassung Es wird über ab intito-Rechnungen mit Berücksichtigung der Elektronenkorrelation berichtet, die an Wasser- und Methylenmolekülen als Funktion der Geometrie durchgeführt worden sind. Dazu benutzt man einen großen kontrahierten Gauß-Basissatz. Die Multikonfigurationswellenfunktionen, die unter Benutzung von natürlichen Orbitalen nach der iterativen Prozedur optimiert werden, enthalten für H₂O 277 Konfigurationen und für CH₂ 617. Die Auswahlmethode, die zu Wellenfunktionen 1. Ordnung führt, wird diskutiert. Im Falle des Wassers erhält man die SCF-Geometrie zu r=0,942 Å, =105,8°, das korrelierte Resultat ist: r=0,968 Å, =103,2° und das experimentelle r=0,957 Å, =104,5°. Für Wasser ergeben sich die Valenzkraftkonstanten (in Millidyn Å^–1) 8,72 (SCF), 8,75 (CI) und 8,4 (Experiment). Die Deformationskonstanten sind 0,88 (SCF), 0,83 (CI) und 0,76 (Experiment). Im Falle des Methylens ist die SCF-Geometrie r=1,072 Å, =129,5°, während man mit Wellenfunktionen 1. Ordnung r=1,088 Å und =134° erhält. Die CH₂-Kraftkonstanten werden für die Valenzschwingung zu 6,16 (SCF) und 6,13 (CI) bzw. für die Deformationsschwingung zu 0,44 (SCF) und 0,33 (CI) vorausgesagt.

---

---

Work performed under the auspices of the U.S. Atomic Energy Commision.

---

Supported by the grants from the Research Corporation and the University of California Committee on Research.     

Microwave spectrometry study of first stages of latex coalescence

The measurement of the complex dielectric constant (ϵ = ϵ′- j ϵ″) in the dipolar absorption domain of the “free” water molecule (microwave region) makes it possible to follow quasi specifically and precisely the water circulation and its interactions with any latex. Weight and dielectric constants variations were simultaneously recorded during water evaporation, which, occurring in a latex, led to particle coalescence and film formation. The influence of the glass transition temperature of polymers, the particle size distribution, the medium ionic strength and emulsifier in a latex were studied.     

Light-induced cis/trans isomerization of cis-[Pd(L-S,O)2] and cis-[Pt(L-S,O)2] complexes of chelating N,N-dialkyl-N′-acylthioureas: key to the formation and isolation of trans isomers

Irradiation cis-[M(Lⁿ-S,O)₂] complexes (M = Pt^II, Pd^II) derived from N,N-dialkyl-N′-benzoylthioureas (HLⁿ) with various sources of intense visible polychromatic or monochromatic light with λ < 500 nm leads to light-induced cis?→?trans isomerization in organic solvents. In all cases, white light derived from several sources or monochromatic blue-violet laser 405 nm light, efficiently results in substantial amounts of the trans isomer appearing in solution, as shown by ¹H NMR and/or reversed-phase HPLC separation in dilute solutions at room temperature. The extent and relative rates of cis/trans isomerization induced by in situ laser light (λ = 405 nm) of cis-[Pd(L²-S,O)₂] was directly monitored by ¹H NMR and ¹⁹⁵Pt NMR spectroscopy of selected cis-[Pt(L-S,O)₂] compounds in chloroform-d; both with and without light irradiation allows the δ(¹⁹⁵Pt) chemical shifts cis/trans isomer pairs to be recorded. The cis/trans isomers appear to be in a photo-thermal equilibrium between the thermodynamically favored cis isomer and its trans counterpart. In the dark, the trans isomer reverts back to the cis complex in what is probably a thermal process. The light-induced cis/trans process is the key to preparing and isolating the rare trans complexes which cannot be prepared by conventional synthesis as confirmed by the first example of trans-[Pd(L-S,O)₂] characterized by single-crystal X-ray diffraction, deliberately prepared after photo-induced isomerization in acetonitrile solution.     

Pore formation during the pyrolysis of C-Nb2O5 and C-Ta2O5 xerogels

Binary organic-inorganic gels have been prepared by mixing a carbonaceous hydrosol and a Nb₂O₅ or Ta₂O₅ sol derived by hydrolysis of the alkoxides. The gels are pyrolyzed under an inert atmosphere into precursors in which carbon and the metal oxides are mixed very intimately. High temperature treatment converts the precursors into the cubic face centered carbides. The precursors as well as the carbides have been shown to be micro- and mesoporous materials. Measurements of nitrogen adsorption reveal a characteristic change of the shapes of the isotherms (Type I Type IV) and of the hysteresis loops (H4H2H1) during the thermal processes. Pore widening has been observed with rising temperature. The phenomena of crystallization, carbothermal reduction and sintering were found to control the pore shape and size. The results of the adsorption measurement correlate well with those of the thermoanalytical and X-ray diffraction studies.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday