电场作用下离子型稀土矿浸矿溶浸液渗流特性研究

根据多孔介质中电动渗流效应,在离子型稀土矿浸出过程中,提出了利用电场强化浸矿溶浸液渗流能力的方法,通过机制分析和电动渗流试验,探讨了电场作用对溶浸液的渗流特性的影响。结果表明:电场作用可以有效地强化矿床孔隙中浸矿溶浸液渗流能力,强化效果与电场强度、矿床渗透率和溶浸液流体性质等因素有关;相同流体压力梯度下,电场作用下矿床中溶浸液电动渗流随电场强度增大而增加变快;矿床渗透率越高,电场作用对溶浸液渗流特性的影响越明显;浸矿溶浸液浓度越高,孔隙中溶浸液的电动渗流效应越明显。     

三聚噻吩TCNQ复合物晶体结构的测定——MM与图形技术在测定晶体结构中的应用

本文利用直接法和应用分子力学与图形技术结合的尝试法, 测定了取向无序的三聚噻吩TCNQ复合物的晶体结构, 采用0PEC程序对复合物晶体进行堆积分析和堆积能的计算。     

A kinetic analysis of the pyrolysis of some australian coals by non-isothermal thermogravimetry

The pyrolysis of a suite of brown coal samples and bituminous coal maceral concentrates is investigated by non-isothermal thermogravimetry. The TG data for these coals reveal a two-stage pyrolysis process. The activation energy for the primary pyrolysis stage is considerably higher than that for the secondary pyrolysis stage. It is evident that a particular coal may be characterised by the weighted mean apparent pyrolysis activation energy which correlates with the corresponding specific energy of the coal.

---

Zusammenfassung Mittels nichtisothermer Thermogravimetrie wurde die Pyrolyse einer Reihe von Braunkohlenproben und Mazeralkonzentrate aus bituminösen Kohlen untersucht. Die TG-Daten dieser Kohlen weisen einen zweischrittigen Pyrolyseprozeß auf. Die Aktivierungsenergie für den ersten Pyrolyseschritt ist erheblich höher als die des zweiten Pyrolyseschrittes. Es ist offensichtlich, daß eine gegebene Kohle durch den gewichteten Mittelwert der scheinbaren Aktivierungsenergie der Pyrolyse charakterisiert werden kann, welcher mit der entsprechenden spezifischen Energie der Kohle korreliert.

---

---

Dedicated to Professor Dr. H. J. Seifert on the occasion of his 60^th birthday     

Synthesis, structure and photoluminescent property of a novel potassic compound

A novel 3D coordination compound of K(H2TDA)(H20)(1)(H_3TDA=1H-1,2,3-triazole-4,5-dicarboxylic acid) has been prepared and characterized by IR spectroscopy,elemental analysis,ICP and single-crystal X-ray diffraction.Compound 1 displays strong fluorescent emission at room temperature.     

Microwave drying of granules containing a moisture-sensitive drug: a promising alternative to fluid bed and hot air oven drying

The impact of microwave drying and binders (copolyvidone and povidone) on the degradation of acetylsalicylic acid (ASA) and physical properties of granules were compared with conventional drying methods. Moist granules containing ASA were prepared using a high shear granulator and dried with hot air oven, fluid bed or microwave (static or dynamic bed) dryers. Percent ASA degradation, size and size distribution, friability and flow properties of the granules were determined. Granules dried with the dynamic bed microwave dryer showed the least amount of ASA degradation, followed by fluid bed dryer, static bed microwave oven and hot air oven. The use of microwave drying with a static granular bed adversely affected ASA degradation and drying capability. Dynamic bed microwave dryer had the highest drying capability followed by fluid bed, static bed microwave dryer and conventional hot air oven. The intensity of microwave did not affect ASA degradation, size distribution, friability and flow properties of the granules. Mixing/agitating of granules during drying affected the granular physical properties studied. Copolyvidone resulted in lower amount of granular residual moisture content and ASA degradation on storage than povidone, especially for static bed microwave drying. In conclusion, microwave drying technology has been shown to be a promising alternative for drying granules containing a moisture-sensitive drug.     

Enantioselective Conjugate Addition of Diethylzinc to Chalcone Catalyzed by Ni（acac）2 and Chiralβ-Amino Alcohols

Enantioselectivge conjugate addition of diethyzinc to chalcone was carried out in the presenee of Ni (acac)2 complexed with five pyrrolidfumyimethanois derived from L-proline. (S)-N-Benzyl-2-(l-hydroxy.l-methylethyl) pyrrolidlne was found to be the best ngnd in asymmetric conjugate addition among the five ligands. The products were obtained with up to 70% ee.The configuration of the product was determined jointly by the substituents on the carbon of the hydroxy group and the nitrogen atom.     

Pt电极上Sb，S吸附原子对正丁醇电催化氧化性能的影响

运用电化学循环伏安和石英晶体微天平研究了0.1 mol/L H2SO4 溶液中正丁醇（1-BL）在Pt电极和以Sb，S吸附原子修饰的Pt（Pt/Sbad和Pt/Sad）电极上电催化氧化过程。从电极表面质量变化表明正丁醇的氧化与电极表面氧物种有着极其密切的关系。Pt电极表面Sb吸附原子能在较低的电位下吸附氧，可显著提高正丁醇电催化氧化活性。与Pt电极相比较，Sb吸附原子修饰的Pt电极使正丁醇氧化的峰电位负移了0.33 V，峰电流增大了近一倍。相反，Pt电极表面S吸附原子的氧化会消耗表面氧物种，抑制了正丁醇的电氧化。本文从表面质量变化提供了吸附原子电催化作用的新数据。     

A thermal analysis study of the oxidation of brown coal chars

The combustion of brown coal chars, obtained at different pyrolysis temperatures, have been investigated using TG, DTG and DTA thermal analysis methods. The burning profiles and the kinetic parameters derived from TG and DTA data show that all the chars are less reactive than the parent coal. The higher temperature chars have lower overall reactivity. From the corresponding infrared spectra, the chars obtained at 800 °C and 1000 °C appear to have graphitic structures.

---

Zusammenfassung Mittels TG-, DTG- und DTA-Methoden wurde die Verbrennung von unter verschiedenen Pyrolysetemperaturen erhaltenen Braunkohlenschwelkoksen untersucht. Das Verbrennungsprofil und die kinetischen Parameter, erhalten aus TG und DTG, zeigen, daß die Schwelkokse eine geringere Aktivität haben, als die ursprüngliche Braunkohle. Die Schwelkokse höherer Temperatur besitzen eine niedrigere resultierende Aktivität. Aufgrund der entsprechenden IR-Spektren besitzen die bei 800 °C und 1000 °C erhaltenen Schwelkokse eine Graphitstruktur.

---

, , . , , . , , . , , 800 1000°, .

     

Photocatalytic Hydrogen and Oxygen Formation from Water over Ga-modified Zeolite

Water could be decomposed into hydrogen and oxygen over Ga-modified ZSM-5 zeolite under UV irradiation. The photocatalytic activity was elevated significantly by supporting the gallium species and was sensitive to the loading amount of gallium species on the ZSM-5 zeolites.     

The electrochemical behaviour of ferrocene in a photocurable poly(methyl methacrylate-co-2-hydroxylethyl methacrylate) film for a glucose biosensor

A single-step fabrication of a glucose biosensor with simultaneous immobilization of both ferrocene mediator and glucose oxidase in a photocurable methacrylic film consisting of poly(methyl methacrylate-co-2-hydroxylethyl methacrylate) was reported. The entrapped ferrocene showed reversible redox behaviour in the photocured film and no significant leaching of both entrapped ferrocene and enzyme glucose oxidase was observed because of the low water absorption properties of the co-polymer films. From electrochemical studies, ferrocene entrapped in the co-polymer film demonstrated slow diffusion properties. A linear glucose response range of 2-11 mM was obtained at low applied potential of +0.25 V. The glucose biosensor fabricated by this photocuring method yielded sensor reproducibility and repeatability with relative standard deviation of <10% and long-term stability of up to 14 days. The main advantage of the use of photocurable procedure is that biosensor membrane fabrication can be performed in a single step without any lengthy chemical immobilization of enzyme.