Determination of bismuth, cadmium and thallium in 33 international standard reference rocks by fractional distillation combined with flameless atomic absorption spectrometry

Summary The analysis of bismuth, cadmium and thallium in rock samples can be performed by flameless atomic absorption spectrometry, after separation and preconcentration by a volatilization technique. This method has the major advantage that small amounts of substance can be used with a minimum consumption of chemicals, so that sources of contamination are reduced. The detection limit for Bi and Tl is about 1 ppb and for Cd about 0.1 ppb in the rock. Depending on the content in the rock samples, the relative standard deviation is between 2 and 30%. Several attempts have been made to determine the yields of Bi, Cd and Tl from synthetic and natural samples.

---

Bestimmung von Wismut, Cadmium und Thallium in 33 internationalen Standard-Gesteinsproben durch fraktionierte Destillation in Verbindung mit flammenloser AAS

Zusammenfassung Die Bestimmung von Wismut, Cadmium und Thallium in Gesteinen kann mit der flammenlosen Atomabsorptions-Spektroskopie nach verdampfungsanalytischer Abtrennung erfolgen. Die Verdampfungsnalyse hat den Vorteil, daß bei geringem Reagentienverbrauch kleine Mengen analysiert werden können. Die Gefahr der Einschleppung von Verunreinigungen wird erheblich vermindert. Die Nachweisgrenze bezogen auf die Probe beträgt für Wismut und Thallium ca. 1 ppb und für Cadmium ca. 0.1 ppb. In Abhängigkeit von der Konzentration liegt die relative Standardabweichung zwischen 2 und 30 %. An synthetischen und natürlichen Proben sind die Ausbeuten an diesen Elementen bestimmt worden.

     

Internal biokinetic behaviour of molybdenum in humans studied with stable isotopes as tracers

Although molybdenum is considered to be an essential trace metal for humans, the knowledge about its metabolism is rather limited. The present study was aimed at the assessment of biokinetics following intravenous injection of trace amounts of 95Mo or 96Mo into five healthy volunteers. In a total of 11 investigations, the plasma clearance up to eight hours and the urinary excretion for at least three days after the injection were evaluated. The tracer concentrations were determined by proton nuclear activation analysis in blood plasma and by thermal ionization mass spectrometry in urine samples respectively. In all subjects, the plasma clearance is much faster than expected from the literature. The data obtained for the plasma clearance of the tracer can reasonably be fitted by a two exponential equation. The half times of the fast component range between 4 and 70 minutes and for the slow component between 3 and 30 hours. The urinary excretion of the injected tracer seems also to be faster than expected and the fractions lost are higher for larger doses administered. For the smallest dose given, 34% of the injected tracer were excreted within one day whereas for the four times larger dose about 60% were lost. These findings on urinary excretion are in agreement with recently published results.     

Fractal Characterization of Wide Pore Range Catalysts: Application to Pd-Ag/SiO(2) Xerogels

Fractal analysis has been applied to characterize the structure of Pd-Ag/SiO(2) catalysts dried under vacuum (150 degrees C and 12 hPa) with different concentrations of Pd-Ag. Nitrogen adsorption-desorption, mercury porosimetry, and small-angle X-ray scattering measurements have been used. The different approaches to fractal analysis and their conditions of applicability are briefly described. Results are discussed in relation to those derived previously from classical interpretations. This analysis shows that Pd-Ag/SiO(2) xerogels exhibit a very open self-similar pore structure analogous to the structure of supercritically dried aerogels and that the micropore texture can be tailored by varying the silver content. Copyright 2000 Academic Press.     

Bioconcentration of zinc and its effect on the biochemical constituents of the gill tissues of Labeo rohita: An FT-IR study

In the present work, an attempt has been made to assess the bioconcentration and distribution of zinc on the selected organs of Labeo rohita and to study the effect of zinc exposure on the biochemical constitutions of gill tissues of L. rohita by using FT-IR Spectroscopy. The concentration pattern in the organs reveals that the liver is the prime site of metal binding and muscle accumulates least metal concentration. The accumulation profile is in the order: liver > gill > kidney > brain > bone > muscle. It has also been observed that the administration of chelating agent d-Penicillamine (DPA) reduces the zinc concentration in all tissues more effectively than the administration of the chelating agent Ethylene Diamine Tetra Acetic acid. The FT-IR spectra reveal that zinc exposure causes significant changes in the biochemical constitutions of the gill tissues. It causes an alteration in the protein secondary structures by decreasing the α-helix and increasing the β-sheet contents. Further, it has been observed that the administration of chelating agent DPA improves the protein and lipid contents in the gill tissues compared to zinc exposed tissues. This result shows that DPA is the effective chelator of zinc in reducing the body burden of L. rohita fingerlings. In conclusion, the findings of the current study suggest that zinc exposure causes significant changes in both lipids and proteins of the gill tissues, and changes the protein profile in favour of β-sheet structure.     

Tridentate Lewis Acids Based on 1,3,5‐Trisilacyclohexane Backbones and an Example of Their Host–Guest Chemistry

Directed tridentate Lewis acids based on the 1,3,5‐trisilacyclohexane skeleton with three ethynyl groups [CH₂Si(Me)(C₂H)]₃ were synthesised and functionalised by hydroboration with HB(C₆F₅)₂, yielding the ethenylborane {CH₂Si(Me)[C₂H₂B(C₆F₅)₂]}₃, and by metalation with gallium and indium organyls affording {CH₂Si(Me)[C₂M(R)₂]}₃ (M=Ga, In, R=Me, Et). In the synthesis of the backbone the influence of substituents (MeO, EtO and iPrO groups at Si) on the orientation of the methyl group was studied with the aim to increase the abundance of the all‐cis isomer. New compounds were identified by elemental analyses, multi‐nuclear NMR spectroscopy and in some cases by IR spectroscopy. Crystal structures were obtained for cis‐trans‐[CH₂Si(Me)(Cl)]₃, all‐cis‐[CH₂Si(Me)(H)]₃, all‐cis‐[CH₂Si(Me)(C₂H)]₃, cis‐trans‐[CH₂Si(Me)(C₂H)]₃ and all‐cis‐[CH₂Si(Me)(C₂SiMe₃)]₃. A gas‐phase electron diffraction experiment for all‐cis‐[CH₂Si(Me)(C₂H)]₃ provides information on the relative stabilities of the all‐equatorial and all‐axial form; the first is preferred in both solid and gas phase. The gallium‐based Lewis acid {CH₂Si(Me)[C₂Ga(Et)₂]}₃ was reacted with a tridentate Lewis base (1,3,5‐trimethyl‐1,3,5‐triazacyclohexane) in an NMR titration experiment. The generated host–guest complexes involved in the equilibria during this reaction were identified by DOSY NMR spectroscopy by comparing measured diffusion coefficients with those of the suitable reference compounds of same size and shape.     

Trace element analysis and microanalysis of silicate and carbonate rocks by flameless atomic absorption spectrophotometry

Summary Flameless atomic absorption spectrophotometric methods for the microanalysis and trace element analysis of rocks are described. The microanalysis of the elements Al, Fe, Mn and Ti so far determined can be carried out in the diluted solution of the digested samples (2.5 mg substance/250 ml to 5 mg/100 ml) without additional separation. In the case of trace element analysis the elements may be determined either directly in the solution (Sr, Pb) or after separation. Separation can be carried out by extraction from the solution (Tl) or by the volatilization technique with the solid substance heated to 1000–1200°C (Tl, Pb, Cd, Bi). For Hg the method of electrolytical separation together with the volatilization technique is suitable. The methods were tested with rock standards for precision and accuracy.

---

Spuren- und Mikroanalyse von Silicat- und Carbonatgesteinen durch flammenlose Atomabsorptions-Spektralphotometrie

Zusammenfassung Verfahren zur Mikro- und Spurenanalyse von Gesteinen mit Hilfe der flammenlosen Atomabsorptions-Spektralphotometrie werden beschrieben. Bei der Mikroanalyse können ohne zusätzliche Trennverfahren die bisher untersuchten Elemente Al, Fe, Mn und Ti direkt aus den verdünnten Aufschlußlösungen (2,5mg Probe/ 250 ml bis 5 mg/100 ml) bestimmt werden. Bei der Spurenanalyse erfolgt die Bestimmung entweder direkt aus der Aufschlußlösung (Sr, Pb) oder nach Abtrennung des Elementes. Die Abtrennung kann mittels Extraktion aus der Aufschlußlösung (Tl) oder auch durch Verdampfung aus der Festsubstanz bei 1000–1200°C (Tl, Pb, Cd, Bi) erfolgen. Für Hg eignet sich ein elektrolytisches Trennverfahren in Verbindung mit der Verdampfungsanalyse. Die Verfahren wurden mit Gesteinsreferenzproben auf ihre Reproduzierbarkeit und Genauigkeit geprüft.

We thank Prof. Dr. K. H. Wedepohl for his continued interest in our work and we are grateful to him for his generous support. We are much obliged to Prof. Dr. A. G. Herrmann for his valuable advice and encouragement in technical matters. Financial assistance from the DFG is gratefully acknowledged.     

Protoporphyrin IX‐Functionalized AgSiO2 Core–Shell Nanoparticles: Plasmonic Enhancement of Fluorescence and Singlet Oxygen Production

Metal‐enhanced processes arising from the coupling of a dye with metallic nanoparticles (NPs) have been widely reported. However, few studies have simultaneously investigated these mechanisms from the viewpoint of dye fluorescence and photoactivity. Herein, protoporphyrin IX (PpIX) is grafted onto the surface of silver core silica shell NPs in order to investigate the effect of silver (Ag) localized surface plasmon resonance (LSPR) on PpIX fluorescence and PpIX singlet oxygen (¹O₂) production. Using two Ag core sizes, we report a systematic study of these photophysical processes as a function of silica (SiO₂) spacer thickness, LSPR band position and excitation wavelength. The excitation of Ag NP LSPR, which overlaps the PpIX absorption band, leads to the concomitant enhancement of PpIX fluorescence and ¹O₂ production independently of the Ag core size, but in a more pronounced way for larger Ag cores. These enhancements result from the increase in the PpIX excitation rate through the LSPR excitation and decrease when the distance between PpIX and Ag NPs increases. A maximum fluorescence enhancement of up to 14‐fold, together with an increase in photogenerated ¹O₂ production of up to five times are obtained using 100 nm Ag cores coated with a 5 nm thick silica coating.