Shape-controlled synthesis of manganese oxide octahedral molecular sieve three-dimensional nanostructures

Cryptomelane-type manganese oxide octahedral molecular (OMS) sieve three-dimensional (3D) nanostructures were synthesized via facile temple-free low-temperature hydrothermal reactions. Morphologies of the cryptomelane-type OMS-2 nanoparticles with tunnel dimension of 4.6 x 4.6 A can be tuned by varying reaction temperatures. At low temperature (120 degrees C), OMS-2 dendritic nanoclusters composed of uniform single-crystal nanotetragonal prisms with square cross-sections were formed. At high temperature (180 degrees C), the morphologies of OMS-2 became spherical dandelion-like microspheres composed of uniform single-crystal OMS-2 nanoneedles. Slow oxidation of Mn(2+) by Cr(2)O(7)(-) under hydrothermal conditions is critical for the formation of the hierarchically ordered OMS-2 3D nanostructures.     

Microfluidic add-on for standard electrophysiology chambers

We have developed a microfluidic brain slice device (microBSD) that marries an off-the shelf brain slice perfusion chamber with an array of microfluidic channels set into the bottom surface of the chamber substrate. As this device is created through rapid prototyping, once optimized, it is trivial to replicate and share the devices with other investigators. The device integrates seamlessly into standard physiology and imaging chambers and it is immediately available to the whole slice physiology community. With this technology we can address the flow of neurochemicals and any other soluble factors to precise locations in the brain slice with the temporal profile we choose. Dopamine (DA) was chosen as a model neurotransmitter and we have quantified delivery in brain tissue using cyclic voltammetry (CV) and fluorescence imaging.     

A coated piezoelectric crystal sensor for acetic acid vapour determination

A novel sensor for acetic acid vapour determination is proposed. This sensor is based on a piezoelectric crystal covered with a film of diethylenetriamine. For the sensor development a system of our own design-consisting of testing chamber, oscillator circuit and measure instruments-has been employed. The sensor shows its activity to the acetic acid vapours for more than 60 days. The selectivity is adequate although some vapours interfere: hydrochloric acid, formic acid, formaldehyde, tributyl phosphate, chloroform, chlorobenzene, acetone and isobutylmethylketone. The sensor described can be applied to detect acetic acid vapours in the presence of other vapours: acetonitrile, acrolein, benzene, n-hexane, ethanol, propanol, n-butyl acetate, isopropyl ether, isoamyl alcohol, ethyl ether, methylene chloride, carbon tetrachloride and toluene. The major advantages of the proposed sensor over other existing techniques are its simplicity, reduced cost and capacity for use in situ.     

Acid catalysed novel rearrangement of bicyclic dienone

The dienone (4) on heating with methanolic hydrochloric acid underwent ring cleavage yielding the aromatic ketal (6) which on acid hydrolysis produced the aldehyde (7). Similar treatment of the dienone (4) with acetic anhydride and p-toluenesulfonic acid furnished the ester (8) which on alkaline hydrolysis afforded the dimeric product (10). The structure of the products (6), (7), (8) and (10) are defined on the basis of the spectral evidence.     

Biomimetic reductive amination under the continuous-flow reaction conditions

This study present a full account of continuous-flow reaction conditions for biomimetic reductive amination of fluorinated carbonyl compounds to corresponding amines and amino acids of biomedical importance. We demonstrate that simple silica-adsorbed DBU can be used as efficient catalysts for on-column 1,3-proton shift reaction, a key transformation in the biomimetic reductive amination process. This new on-column process features operationally convenient conditions, higher chemical yields, enantioselectivity and purity of the corresponding products as compared with traditional in-flask reactions. Moreover the removal of base-catalyst, the most delicate problem of the in-flask reactions, is not an issue in the on-column process, as the silica-adsorbed DBU or polymer-bound guanidine remains on the column and can be reused. This feature renders the overall process substantially more economical and synthetically efficient, in particular, for large-scale synthesis of the corresponding fluorinated amines and amino acids target.     

On-column derivatization and analysis of amino acids, peptides, and alkylamines by anhydrides using capillary electrophoresis

This work demonstrates the use of an in-capillary procedure for derivatization of amino acids, peptides, and alkylamines by anhydrides using capillary electrophoresis (CE). Migrating in an uncoated fused-silica capillary, plugs of substrate and anhydride are injected separately and electrophoresed. Differential transport velocities permit the separate zones to penetrate each other under an applied field, thereby facilitating reaction. In initial experiments the extent of reaction between tryptophan and acetic anhydride was examined and product amounts quantitated by CE. In separate experiments a series of amino acids and peptides were injected into the capillary and reacted with phthalic anhydride on-column to yield the phthalic derivatized species. Finally, on-column derivatization of alkylamines with phthalic anhydride was investigated and electrophoretic mobility related to molecular weight of the derivatized amines. These procedures illustrate the use of the capillary as a microreactor in the facile synthesis of derivatized molecules and ease of quantitation of reaction products under conditions of electrophoresis.     

Trans Influence of Triphenylstibine: Crystal Structures of cis‐[PtBr2(SbPh3)2], trans‐[PtBr(Ph)(SbPh3)2], [NMe4][PtBr3(SbPh3)], and cis‐[PtBr2(SbPh3)(PPh3)]

The work reports the unexpected reaction of diphenyldibromo antimonates (III) with PtCl₂ and cis‐[PtCl₂(PPh₃)₂]. The reaction gives triphenylstibine containing Pt^II complexes viz. cis‐[PtBr₂(SbPh₃)₂] ( 1 ), trans‐[[PtBr(Ph)(SbPh₃)₂] ( 2 ), [NMe₄][PtBr₃(SbPh₃)] ( 3 ), and cis‐[PtBr₂(PPh₃)(SbPh₃)] ( 4 ). All the complexes were characterised by elemental analyses, IR, Raman, ¹⁹⁵Pt NMR, FAB mass spectroscopy and X‐ray crystallography. A plausible mechanism via the phenyl migration is proposed for the formation of these complexes. The average Pt–Br distance in 1 is 2.456(2) Å, in 2 2.496 Å(trans to Ph) while in 3 it is 2.476 Å (trans to Sb) implying a comparable trans influence of Ph₃Sb and Ph₃P.     

Application of external micro-spectrophotometric detection to improve sensitivity on microchips

The goal of this work was to increase the sensitivity of a UV–Vis spectrophotometer by decreasing the background noise and lengthening the optical path. A microphotometer has been modified to precisely select very small parts of a microfluidic channel pattern of a chip and to measure light absorbance on a magnified area of the selected part of the channel. The viability of combining a projection microscope and a spectrophotometer for external absorbance measurements on disposable PDMS chips was studied. Besides the external direct detection above a microfluidic channel, the optical pathlength was lengthened by detecting in the region of the perpendicular exit port. Increasing the cross-sectional area of the zone of irradiation improved the signal-to-noise ratio and the limits of detection (LOD).     

Infinite Assembly of Folded Proteins in Evolution,Disease, and Engineering

Mutations and changes in a protein's environment are well known for their potential to induce misfolding and aggregation, including amyloid formation. Alternatively, such perturbations can trigger new interactions that lead to the polymerization of folded proteins. In contrast to aggregation, this process does not require misfolding and, to highlight this difference, we refer to it as agglomeration. This term encompasses the amorphous assembly of folded proteins as well as the polymerization in one, two, or three dimensions. We stress the remarkable potential of symmetric homo‐oligomers to agglomerate even by single surface point mutations, and we review the double‐edged nature of this potential: how aberrant assemblies resulting from agglomeration can lead to disease, but also how agglomeration can serve in cellular adaptation and be exploited for the rational design of novel biomaterials.     

Conductive triethylene glycol monomethyl ether substituted polythiophenes with high stability in the doped state

Synthesis of two conducting polymers containing 3‐hexylthiophene and 3‐[2‐(2‐(2‐methoxyethoxy)ethoxy)ethoxy]thiophene is demonstrated. In thin‐film transistors, the high‐molecular‐weight polymer shows an average mobility of 4.2 × 10^?4 cm² V^?1 s^?1. Most importantly, the polymers have high conductivity upon doping with iodine and also have high stability in the doped state with high conductivities measured even after 1 month. Furthermore, the doping causes transparency to thin films of the polymer and the films are resistant to common organic solvents. All these properties indicate a great potential for the iodine‐doped polymer to be used as an alternative to commercially available poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate). © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1079–1086