Ion flotation of rhodium(III) and palladium(II) with anionic surfactants

The ion flotation of rhodium(III) and palladium(II) with some anionic surfactants has been investigated. Two flotation procedures are proposed for the separation of some platinum metals, based on differences in the kinetic properties of the chloro-complexes of rhodium(III), palladium(II) and platinum(IV). The first involves the selective flotation of Rh(H(2)O)(3+)(6) from PdCl(2-)(4) and PtCl(2-)(6) in dilute hydrochloric acid with sodium dodecylbenzenesulfonate (SDBS). After precipitation of the hydroxide and redissolution in dilute acid, the Rh(III) is converted into Rh(H(2)O)(3+)(6), Pd(II) and Pt(IV) remaining as PdCl(2-)(4) and PtCl(2-)(6) respectively, and separation is achieved by floating the Rh(H(2)O)(3+)(6) with SDBS. The second is for separation of Pd(II). Prior to flotation, the solution of PdCl(2-)(4) and PtCl(2-)(6) is heated with ammonium acetate to convert PdCl(2-)(4) into Pd(NH(3))(2+)(4). The chloro-complex of Pt(IV) is unaffected. The complex cation, Pd(NH(3))(2+)(4), is then selectively floated with SDBS. The procedures are fast, simple and do not require expensive reagents and apparatus.     

Ionic limiting molar conductivity calculation of Li-ion battery electrolyte based on mode coupling theory

A method is proposed based on mode coupling theory in which the ion transference number is introduced into the theory. The ionic limiting molar conductivities of LiPF6, LiClO4, LiBF4, LiCF3SO3, Li(CF3SO3)2N, LiC4F9SO3, and LiAsF6 in PC(propylene carbonate), GBL(gamma-butyrolactone), PC(propylene carbonate)/EMC(ethylmethyl carbonate), and PC(propylene carbonate)/DME(dimethoxyethane) are calculated based on this method, which does not involve any adjustable parameter. The results fit well to the literature data which are calculated by an empirically adjusted formula. This presents a potential way to calculate the conductivities of Li-ion battery electrolytes.     

Construction and analytical application of ion-selective piezoelectric sensor for atropine sulfate

The method describes the use of a piezoelectric quartz crystal (PQC) as a substitute for ion-selective electrodes. The approach is feasible when the membrane materials are electrically non-conductive and membrane potential measurements are consequently not possible. An ion-selective piezoelectric sensor sensitive to atropine sulfate was constructed by coating a PVC membrane containing activant on one the side of a PQC. On the basis of selective adsorption of atropine ions across the modified film and the sensitive mass response of PQC, the method exhibits a sensitive, rapid response and is easy to operate without pretreatment of the sample. The logarithm of the frequency shift gave a linear relationship with the logarithm of atropine sulfate concentration in the 1.0 x 10(-8)-1.0 x 10(-3) M range with a detection limit of 5.0 x 10(-9) M at pH 7.0. Recoveries were from 98.7-102.2%. Two activants, atropine tetraphenylborate and atropine dipicrylaminate, were synthesized and investigated. Influencing factors were also examined and optimized. The results for real samples obtained by the proposed method agreed with those obtained by conventional methods.     

Structural and spectroscopic study of reactions between chelating zinc-binding groups and mimics of the matrix metalloproteinase and disintegrin metalloprotease catalytic sites: the coordination chemistry of metalloprotease inhibition

To understand the coordination chemistry of zinc-binding groups (ZBGs) with catalytic zinc centers in matrix metalloproteinases (MMPs) and disintegrin metalloproteases (ADAMs), we have undertaken a model compound study centered around tris(3,5-methylphenypyrazolyl)hydroboratozinc(II) hydroxide and aqua complexes ([Tp(Ph,Me)ZnOH] and [Tp(Ph,Me)Zn(OH2)]+, respectively, wherein (Tp(Ph,Me))- = hydrotris(3,5-methylphenylpyrazolyl)borate) and the products of their reactions with a class of chelating Schiff's base ligands. The results show that the protic ligands, HL (HL = N-propyl-1-(5-methyl-2-imidazolyl)methanimine (5-Me-4-ImHPr), N-propyl-1-(4-imidazolyl)methanimine (4-ImHPr), and N-propyl-1-(2-imidazolyl)methanimine (2-ImHPr)), react with [Tp(Ph,Me)ZnOH] and give products with the general formula [Tp(Ph,Me)ZnL], whereas reactions with neutral aprotic ligands, L' (L' = N-propyl-1-(1-methyl-2-imidazolyl)methanimine (1-Me-2-ImPr) and N-propyl-1-(2-thiazolyl)methanimine (2-TaPr)), yield the corresponding [Tp(Ph,Me)ZnL]+ complexes. Although the phenol group of N-propyl-1-(2-hydroxyphenyl)methanimine (2-HOPhPr) is protic, this ligand forms a cationic four-coordinate complex containing an intraligand hydrogen bond. The solid-state structures of these complexes were determined by single-crystal X-ray diffraction, and the results showed that the protic ligands form five-membered chelates of the Zn2+ ion. All ligands displace the aqua ligand in [Tp(Ph,Me)Zn(OH2)]+ to yield complexes having 1H NMR spectra consistent with the formation of five membered chelates. The 1H resonance frequencies of the chelating ligands typically shift upfield upon coordination to the zinc center, due to ring current effects from the pendant phenyl groups of the (Tp(Ph,Me))- ligand. Thus, the 1H NMR spectra provide a convenient and sensitive means of tracking the solution reactions by titration. The resulting series of spectra showed that the stabilities of the chelates in solution depend on the propensity of the ligands to deprotonate upon chelation of the zinc center. The behaviors of these bidentate ZBGs provide insight into the structural and electronic factors that contribute to the stabilities of inhibited MMPs and ADAMs and suggest that the proton acidity of the coordinated ZBG may be a crucial criterion for inhibitor design.     

Layer-by-layer fabrication and characterization of DNA-wrapped single-walled carbon nanotube particles

Carbon nanotubes have been proposed as support materials for numerous applications, including the development of DNA sensors. One of the challenges is the immobilization of DNA or other biological molecules on the sidewall of carbon nanotubes. This paper introduces a new fabrication of DNA-carbon nanotubes particles using the layer-by-layer (LBL) technique on single-walled carbon nanotubes (SWCNTs). Poly(diallyldimethylammonium) (PDDA), a positively charged polyelectrolyte, and DNA as a negatively charged counterpart macromolecule are alternatively deposited on the water-soluble oxidized SWCNTs. Pure DNA/PDDA/SWCNTs particles can be prepared and separated by simple unltracentrifugation. The characterization of DNA/PDDA/SWCNTs particles was carried out by scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV-visible spectroscopy, Raman spectroscopy, and thermogravimetric analysis (TGA). An electrode modified by the DNA/PDDA/SWCNTs particles shows a dramatic change of the electrochemical signal in solutions of tris(2,2'-bipyridyl)ruthenium(II) ((Ru(bpy)(3)2+) as a reporting redox probe. A preliminary application of the DNA-modified carbon nanotubes in the development of DNA sensors used in the investigation of DNA damage by nitric oxide is presented.     

Ultraviolet photochemistry of ethane: implications for the atmospheric chemistry of the gas giants

Chemical processing in the stratospheres of the gas giants is driven by incident vacuum ultraviolet (VUV) light. Ethane is an important constituent in the atmospheres of the gas giants in our solar system. The present work describes translational spectroscopy studies of the VUV photochemistry of ethane using tuneable radiation in the wavelength range 112 ≤ λ ≤ 126 nm from a free electron laser and event-triggered, fast-framing, multi-mass imaging detection methods. Contributions from at least five primary photofragmentation pathways yielding CH₂, CH₃ and/or H atom products are demonstrated and interpreted in terms of unimolecular decay following rapid non-adiabatic coupling to the ground state potential energy surface. These data serve to highlight parallels with methane photochemistry and limitations in contemporary models of the photoinduced stratospheric chemistry of the gas giants. The work identifies additional photochemical reactions that require incorporation into next generation extraterrestrial atmospheric chemistry models which should help rationalise hitherto unexplained aspects of the atmospheric ethane/acetylene ratios revealed by the Cassini–Huygens fly-by of Jupiter.

The vacuum ultraviolet photodissociation dynamics of ethane provide clues for modelling the atmospheric chemistry of the gas giants.     

Synthesis of nonracemic allylic hydroxy phosphonates via alkene cross metathesis

Allylic hydroxy phosphonates and their derivatives can be interconverted by using cross metathesis with second generation Grubbs catalyst. The absolute stereochemistry of the starting phosphonate is conserved in the product. Cross metathesis reaction of the acrolein-derived phosphonate 2a yields a series of functionalized allylic hydroxy phosphonates. However, the cross metathesis reaction is often accompanied by competing dimerization and alkene migration reactions leading to a reduction in yield. The cinnamaldehyde- and crotonaldehyde-derived phosphonates 2b and 2c were also examined. In general, the metathesis reactions of phosphonates 2b and 2c are considerably slower than those for phosphonate 2a leading to mixtures. Several hydroxyl-protected derivatives of the phosphonate 2a (methyl carbonate 3a, acetate 4a, N-tosyl carbamate 5a, TBDMS 6a, and acetoacetate 7a) undergo metathesis without competing side reactions to give substituted allylic phosphonates in good to excellent yield.     

Raman and UV-visible absorption spectra of ion-paired aggregates of copper porphyrins

Raman and UV-visible absorption spectra of ion-paired aggregate constructed from two copper porphyrins, copper tetrakis(4-N-methylpyridyl)porphyrin (CuTMPyP) and copper tetrakis(4-sulfonatophenyl)pophyrin (CuTSPP), are reported in this paper. The absorption bands of the aggregate was found exhibiting obvious shift and broadening, which are attributed to the excitonic coupling between the two paired porphyrin rings. The excitonic coupling in the aggregates also induces evident alteration for Raman intensities compared with monomer spectrum. Aggregation results in only small shifts (2-3 cm(-1)) for Raman lines connecting with the vibrations of porphyrin rings, manifesting only slight structural change of porphyrin skeletons. On the other hand, evident downshift (5 cm(-1)) was observed for the Cm-pyridyl stretch mode (1254 cm(-1)) of CuTMPyP, suggesting weakening of the Cm-pyridyl bonds by aggregation. Raman depolarization ratios of the aggregates are different from those of the monomers, implying a lowering of effective symmetry due to the molecular packing in the aggregates.     

A zwitterion of 1,5‐bis­(2‐hydroxy­benzamido)‐3‐aza­pentane: a two‐dimensional hydrogen‐bonding network involving dimers

The title compound, 2‐{N‐[2‐(2‐hydroxy­benzamido)ethyl­ammonio­ethyl]amino­carbon­yl}phenolate, C₁₈H₂₁N₃O₄, crystallizes in a zwitterionic form as a result of inter­molecular proton transfer and possesses a negatively charged phenolate group and a protonated amino group. The 2‐hydroxy­benzamide and 2‐(amino­carbonyl)­phenolate moieties attached to the two ends of the C—C—N—C—C backbone adopt a cis conformation in relation to this backbone. All N‐ and O‐bound H atoms are involved in hydrogen‐bond formation; the zwitterions are first linked into head‐to‐tail dimers, which are further organized into a two‐dimensional network parallel to the crystallographic bc plane.     

The preparation and fluorescence properties of europium nanoparticles

A new structured metallic nanomaterial of europium nanoparticle was prepared using tannic acid as the reductive agent,and nanoeuropium protein conjugates were synthesized by the method of lipoic acid modification on the surface of nanoparticle,which opens a new field of application of lanthanides in nanotechniques.Their properties were also characterized by UV-vis absorption spectroscopy,transmission electron microscopy (TEM),and fluorescence spectroscopy.The europium nanoparticle and its protein conjugates solution were stable and water-soluble.The fluorescence intensity of the composite europium nanoparticles was significantly increased in the presence of trace protein,and was linear proportional to the concentration of proteins under optimum conditions.According to this,a fluorimetric method for the determination of protein was developed in this paper.