量子点单光子源的光纤耦合

半导体量子点在低温下产生谱线细锐的激子发光可制备单光子源.光纤耦合可避免低温共聚焦装置扫描定位和振动影响,是实现单光子源即插即用和组件化的关键技术.在耦合工艺上,基于微区定位标记发展出拉锥光纤与光子晶体腔或波导侧向耦合、大数值孔径锥形端面光纤与量子点样片垂直耦合等技术;然而,上述工艺需要多维度精密调节以避免柔软光纤的畸形弯曲实现对准和高效耦合.陶瓷插针或石英V槽封装的光纤无弯曲且具有大平滑端面,只要与单量子点样片对准贴合就可保证垂直收光, V槽封装的排式光纤还可通过盲对粘合避免扫描对准,耦合简单.本文在前期排式光纤粘合少对数分布Bragg反射镜(distributed Bragg reflector, DBR)微柱样片实现单光子输出基础上,经理论模拟采用多对数DBR腔提升样片垂直出光和光纤收光效率,使光纤输出单光子计数率大大提升.     

Femtosecond laser micromachined optical waveguides in LiTaO3 crystal

By using femtosecond laser micromachining, optical wave guides in both depressed cladding and dual‐line configurations have been produced in LiTaO₃ crystal. The guiding properties and the thermal stability have been investigated for both geometries, which exhibit different performance. Depressed cladding waveguides support guidance along both extraordinary and ordinary index polarizations, while dual‐line waveguides support only extraordinary index polarization. Thermal annealing has been proved to be an effective method to reduce the propagation losses. For the cladding waveguide, the lowest propagation loss was as low as 0.38 dB/cm after the annealing treatment at 400 °C. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

永磁体外部磁场的不均匀性研究

从永磁体的分子电流观点、退磁场、工艺等出发, 以矩形永磁体为例, 从理论上分析了影响永磁体外部磁场不均匀性的各种因素.研究结果表明, 永磁体外部磁场宏观不均匀性(好场区均匀度和面积相对大小) 和空间距离及永磁体的外形设计密切相关. 退磁场对永磁体外部磁场微观不均匀性有着复杂影响. 永磁体工艺如粉末颗粒、取向度、烧结凝固、机械加工等将影响永磁体外部磁场的不均匀性, 如磁化偏角、对称性、光滑性等. 关键词： 永磁体 外部磁场 不均匀性 退磁场     

离散式任意充磁角度Halbach永磁电机解析模型研究

Halbach电机因其自身优势在新型船舶推进、海洋洋流发电等方面受到广泛关注. 本文在假设铁磁材料线性和定子内表面光滑的条件下, 通过将任意充磁角度Halbach阵列等效为两组90° Halbach(或180° Halbach)阵列的矢量合成, 提出了一种分析离散式任意充磁角度Halbach永磁电机气隙磁场的解析方法; 通过对电机中磁标量势的傅里叶级数进行计算, 推导出了最简单的90° Halbach永磁电机在极坐标系下的气隙磁密表达式, 并在此基础上, 给出了任意充磁角度Halbach电机永磁体磁化强度在一个极下的表达式, 进而得出任意充磁角度Halbach电机气隙磁密的分布, 并分析了气隙磁密与电机极对数、永磁体厚度和充磁角度间的关系. 最后通过有限元和试验结果验证了本文方法的正确性. 关键词： 离散式Halbach电机 任意充磁角度 矢量等效 解析模型     

亚微秒脉冲表面介质阻挡放电等离子体诱导连续漩涡的研究

使用粒子激光图像测速技术对亚微秒脉冲激励表面介质阻挡放电激励器连续产生诱导漩涡进行了实验研究, 给出了包含脉冲重复频率和漩涡频率的双频率激励模式的具体形式. 实验过程中出现了原发型与继发型两类示踪粒子空白区, 前者由放电释热的微爆炸作用造成, 使得诱导流动远离壁面, 能够减小壁面摩擦阻力的作用; 以暴露电极左侧继发型空白区被完全吹除作为重复启动激励的临界点. 为提高控制效果应采用尽可能高的脉冲重复频率, 漩涡时间内脉冲数量应大于10, 最大诱导速度随脉冲数量增大而增大, 但动量传递效率降低. 使用亚微秒脉冲激励具备释热、体积力两种作用机理. 关键词： 双频率亚微秒脉冲 表面介质阻挡放电 连续漩涡     

Simulation of pedestrian counter flow through bottlenecks by using an agent-based model

Considerable research has been conducted on the topic of unidirectional evacuations from exits. However, few studies aim at simulating counter flow through a bottleneck with complex conflict. This paper proposes an agent-based model to investigate bidirectional flow evacuation. Pedestrian speed is determined by the speed of the leading agent and the surrounding agents. The moving direction of pedestrian originates from four forces, namely, gradient force, repulsive force, resistance force, and random force. These four forces dominate the main stream of the pedestrian moving trajectory, the interaction between pedestrians and their local environment, the resistance or disinclination to movement, and the random variations and chaotic nature of pedestrian dynamics. The novelty of this research is in the agent-based model that combines the agent and forces while providing insights for the simulation of the pedestrian dynamic on the cognitive level. The experiment results show that the behavior that arises from this model is consistent with the observations from Guangzhou Metro and that this model could help capture the essence of pedestrian behavior near egresses.     

TiO2 Nanotube Array/Monolayer Graphene Film Schottky Junction Ultraviolet Light Photodetectors

Schottky junctions made from a titanium dioxide nanotube (TiO₂NT) array in contact with a monolayer graphene (MLG) film are fabricated and utilized for UV light detection. The TiO₂NT array is synthesized by the anodization and the MLG through a simple chemical vapor deposition process. Photoconductive analysis shows that the fabricated Schottky junction photodetector (PD) is sensitive to UV light illumination with good stability and reproducibility. The corresponding responsivity (R), photoconductive gain (G), and detectivity (D*) are calculated to be 15 A W^?1, 51, and 1.5 × 10¹² cm Hz^1/2 W^?1, respectively. It is observed that the fabricated PD exhibits spectral sensitivity and a simple power‐law dependence on light intensity. Moreover, the height of the Schottky junction diode is derived to be 0.59 V by using a low temperature I–V measurement. Finally, the working mechanism of the TiO₂NT array/MLG film Schottky junction PD is elucidated.     

基于扩频码的单载波迭代频域均衡水声通信

单载波时域均衡在长时延扩展水声信道中计算量大,并对接收机参数的选择较为敏感,可靠性低,而正交频分复用信号峰均功率比高、对频率偏移敏感. 针对这些问题,提出基于扩频码的单载波块传输高速率水声通信方法和基于T/4分数间隔迭代频域均衡的接收机算法. 该接收机利用已知扩频码进行信道估计以及对由多普勒偏移引起的旋转相位进行估计,并通过一种低复杂度迭代频域均衡算法改善系统性能. 开展了湖上实验研究,结果表明在浅水1.8 km距离且复杂多径干扰条件下,利用BPSK/QPSK调制可实现10^-2–10^-4的误码率并达到1500–3000 bit/s的有效数据率. 关键词： 水声通信 单载波 频域均衡 迭代处理     

The Effect of OMMT on the Morphology and Mechanical Properties of PVC/ABS Blends

Poly(vinyl chloride) (PVC)/acrylonitrile-butadiene-styrene (ABS) blends containing organically modified montmorillonite (OMMT) were prepared using a twin-screw extruder followed by injection molding. The OMMT dispersion was evaluated by X-ray diffraction and transmission electron microscopy. The clay was preferentially situated in the PVC phase and across the interfaces of PVC/ABS. The effect of the addition of OMMT on the morphology and mechanical properties was also evaluated. Scanning electron microscopy revealed a large reduction in domain size when OMMT was used. The mechanical properties were studied through tensile and impact tests. The yield stress increased when an appropriate amount of OMMT was used without impairing the impact strength.