Overview on neutrinos and the Daya Bay experiment

Neutrinos are elementary particles in the Standard Model. Neutrino oscillation is a quantum mechanical phenomenon beyond the Standard Model. Neutrino oscillation can be described by two independent mass-squared differences Δm ₂₁ ² , Δm ₃₁ ² (or Δm ₃₂ ² ) and a 3 × 3 unitary matrix, containing three mixing angles θ ₁₂, θ ₂₃, θ ₁₃, and one charge-parity (CP) phase. θ ₁₂ is about 34° and determined by solar neutrino experiments and the reactor neutrino experiment KamLAND. θ ₂₃ is about 45° and determined by atmospheric neutrino experiments and accelerator neutrino experiments. θ ₁₃ can be measured by either accelerator or reactor neutrino experiments. On Mar. 8, 2012, the Daya Bay Reactor Neutrino Experiment reported the first observation of non-zero θ ₁₃ with 5.2 standard deviations. In June, with 2.5× previous data, Daya Bay improved the measurement of sin²2θ ₁₃ = 0.089 ± 0.010(stat) ± 0.005(syst).     

Static and dynamic properties of grafted ring polymer: Molecular dynamics simulation

The static and dynamic properties of a system of end-grafted flexible ring polymer chains grafted to a flat substrate and exposed to a good solvent are studied by using a molecular dynamics method. The monomers are described by a coarse-grained bead-spring model. Varying the grafting density ρ and the degree of polymerization or chain length N, we obtain the density profiles of monomers, study the structural properties of the chain (radius of gyration, bond orientational parameters, etc.), and also present the dynamic characteristics such as chain energy and bond force. Compared with a linear polymer brush, the ring polymer brush exhibits different static and dynamic properties for moderate or short chain length, while it behaves like linear polymer brush in the regime of long chain length.     

Simulation of near-infrared photodiode detectors based on β-FeSi_2/4H-SiC heterojunctions

In this paper,we propose a near-infrared p-type β-FeSi2/n-type 4H-SiC heterojunction photodetector with semiconducting silicide(β-FeSi2) as the active region for the first time.The optoelectronic characteristics of the photodetector are simulated using a commercial simulator at room temperature.The results show that the photodetector has a good rectifying character and a good response to near-infrared light.Interface states should be minimized to obtain a lower reverse leakage current.The response spectrum of the β-FeSi2/4H-SiC detector,which consists of a p-type β-FeSi2 absorption layer with a doping concentration of 1×1015cm-3 and a thickness of 2.5 μm,has a peak of 755 mA/W at 1.42 μm.The illumination of the SiC side obtains a higher responsivity than that of the β-FeSi2 side.The results illustrate that the β-FeSi2/4H-SiC heterojunction can be used as a near-infrared photodetector compatible with near-infrared optically-activated SiC-based power switching devices.     

Laser Fabrication of Nanostructures on a Pure Aluminum Surface in Air

We report on the fabrication of surface nanoparticles and micro/nanograting structures on bulk pure aluminum in air using a 150 fs, 775 nm femtosecond laser. We investigate the size of the generated surface nanoparticles under irradiation with different femtosecond laser pulses. Smaller nanoparticles can be induced by a larger number of laser pulses and a lower laser fluence. In addition, we observe the formation of micro/nanogratings when the laser focus is scanned across a pure aluminum surface in air. We obtain micro- and nano-grating composite structures on a pure aluminum surface by adjusting the laser fluence and scan velocity. Femtosecond laser surface ablation of bulk pure aluminum in air is potentially a promising technique for efficient fabrication of surface nanostructures.     

超衍射成像中 双螺旋点扩展函数的三维定位精度

开关效应和单分子定位的结合可以实现样品的超衍射分辨成像, 双螺旋点扩展函数将单分子定位纳米分辨从二维扩展到了三维.本文对双螺旋点扩展函数的三维定位精度展开了探讨.首先, 基于费希尔信息量, 计算了双螺旋点扩展函数的无偏估计, 得出其理论定位精度, 并分析了光子数、背景噪声以及有效像元尺寸大小对其定位精度的影响; 其次, 基于单分子定位实验过程中对于数据分析通常采用的高斯拟合质心定位算法, 通过误差传递函数定律求得双螺旋点扩展函数的轴向定位精度.计算机模拟结果表明, 在光子数大于1000的条件下, 高斯拟合质心定位精度和费希尔信息量理论定位精度符合较好. 本文的讨论不仅为双螺旋点扩展函数的三维定位精度提供了理论依据, 同时也可为实验提供理论指导. 关键词： 双螺旋点扩展函数 费希尔信息量 定位精度 高斯拟合     

纳米Ni在77 K温度下压缩行为的研究

利用低温力学测试系统研究了电化学沉积纳米Ni在77 K温度下的压缩行为. 室温下纳米Ni 的屈服强度为 2.0 GPa, 77 K温度下的屈服强度为3.0 GPa, 压缩变形量则由室温的10%左右下降到5%. 借助应变速率敏感指数、激活体积、扫描电子显微和高分辨透射电子显微分析, 对纳米Ni的塑性变形机制进行了表征. 研究表明, 在77 K温度下的塑性变形主要是由晶界-位错协调变形主导, 晶界本征位错弓出后无阻碍地在晶粒内无位错区运动, 直至在相对晶界发生类似切割林位错行为. 同时分析了弓出位错的残留位错部分在协调塑性变形时起到的增加应变相容性和减小应力集中的作用. 利用晶界-位错协调机制和残留位错运动与温度及缺陷的相关性揭示了纳米Ni室温和77 K温度压缩性能差异的内在原因. 关键词： 塑性变形 强度 位错     

Pigment identification and decoration analysis of a 5th century Chinese lacquer painting screen: a micro‐Raman and FTIR study

To investigate the pigments and decoration applied to a wood‐based lacquer painting screen from the tomb of Si‐ma Jin‐long, Shanxi Province, central China, made by Chinese craftsmen in the 5th century, a combination of micro‐Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), wavelength dispersive X‐ray fluorescence (WDXRF), and microscopic examination was used. The obtained results are as follows: (1) the black, yellow, and red colors are identified as carbon black, orpiment and realgar, and cinnabar, respectively, by using micro‐Raman spectroscopy. The FTIR result shows that the white pigment filled in the leaves is not lead white, as assumed in the literature, but gypsum. Whether lead white was used at other locations remains unanswered and requires more samples for further work; (2) the thickness of each discernable pigment layer, as observed under the microscope, is approximately equal and the differences among them are small, suggesting a superfine painting skill; besides, a noticeable smooth interface between wood and the red grounding substance indicates that a polishing process might have been applied before the painting; (3) the red background was proved to contain cinnabar, but further FTIR analyses found no evidence for the presence of Chinese wood oil; and (4) the most interesting finding, rarely reported before, is that white grains of different sizes are found in both pigment layers and the grounding substance, which are perhaps an intentional addition. Further, in situ XRF and Raman analyses indicate that they are sourced from hydroxyapatite, coming probably from the intentional addition of animal bone ash to the lacquer. But how such a process could be finished and what purpose it served have not yet been answered. Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of Turbid Medium Parameters on Back Scattered Intensity and Pulsewidth of Picosecond Pulse

In this paper, we simulate a practical in vivo technique in which is produced influence of turbid medium parameters on backscattered intensity and pulsewidth of picosecond for turbid tissue surface of a semiinfinite medium by a small narrow linewidth laser beams. It is shown that the interaction of the ultra short pulse and the turbid tissue is very used as researching the optical parameters of the turbid medium.     

Calibrating camera radial distortion with cross-ratio invariability

The calibration of camera distortion plays an important role in the field of industrial machine vision application. In this paper, a novel approach for calibrating camera radial distortion is presented based on cross-ratio invariability for perspective projection. Assumed to be with one-order radial distortion, the image coordinates and the cross-ratio of only four collinear points in space are needed in this approach. The cross-ratio, easily known from a calibration target, is identical with that of the four corresponding image points. This is called the cross-ratio invariability for perspective projection. A monadic two-order equation is built based on the cross-ratio invariability, which gives an accurate solution to radial distortion coefficients. A digital simulation and a practical image correction prove this approach to be simple, accurate, efficient and time saving.     

B+注入HgCdTe外延材料的红外透射光谱分析

运用多层模型和膜系传递矩阵以及非线性二乘法，模拟了B+注入碲镉汞外延材料的红外透射光谱，结果表明B+注入碲镉汞外延材料的红外透射光谱能够很好地理论再现，并由此获得了结区的自由载流子浓度分布、迁移率、面自由载流子浓度以及折射率和消光系数等相关参量，所得结果与微分Hall法测试的结果是一致的.计算结果也表明B+注入HgCdTe导致红外透射率变化的根本原因是注入层的高载流子浓度的等离子效应改变了该层的折射率和消光系数.