One-pot two-step microwave-assisted reaction in constructing 4,5-disubstituted pyrazolopyrimidines

[reaction: see text] A microwave-assisted reaction was developed to facilitate the construction of 4,5-disubstituted pyrazolopyrimidines. This one-pot two-step process involves a sequential S(N)Ar displacement of the C4 chloro substituent with various anilines and amines, followed by a Suzuki coupling reaction with different boronic acids. Using microwave irradiation leads to high product conversion, low side product formation, and shorter reactions.     

A new study of the enzymatic hydrolysis of carboxymethyl cellulose with a bulk acoustic wave sensor

A new bulk acoustic wave (BAW) cellulase sensing technique, which is based on the enzymatic hydrolysis process of sodium carboxymethylcellulose (CMC) by cellulase, was established. The frequency shift curves of BAW sensor indicated that the viscosity of the tested solutions decreased during the hydrolysis process. The hydrolysis rate of CMC by cellulase was calculated from the frequency shift curves. The hydrolysis rate of CMC under different pH conditions at 30°C showed that cellulase had high hydrolysis ability approximately at pH 5.0. Kinetic parameters (the Michaelis constant K_m and the maximum rate V_max) of the process were estimated by using a linear method of Lineweaver–Burk plot. K_m is 1.95±0.25 mg ml⁻¹ and V_max is −(4.25±0.58)×10⁻³ g^1/2 cm^−3/2 cP^1/2 min⁻¹. Also the activation energy (E_a) of the enzymatic hydrolysis, with a value of 51.99±1.26 kJ mol⁻¹, was estimated in this work.     

Solubility and Ionic Processes in the Cu X 2? MX ?H2O ( X ?=Cl?, Br?; M +=Li+, Na+, K+, NH4+, Cs+) Systems

 Solubility isotherms in the CuBr₂−MBr−H₂O (M ⁺ = Li⁺, Na⁺, Cs⁺) systems at 298.15 K were measured. The results together with other available literature data for copper chloride and bromide systems were treated by hydration analysis, and comparative discussion of ionic processes taking place in the respective saturated solutions was performed.     

An algorithm for the calculation of the electrostatic repulsion between surface coated with a charge membrane

We propose a numerical procedure for the calculation of the electrostatic repulsion force between two identical, parallel surfaces immersed in anab electrolyte solution. These surfaces are coated with an ion-penetrable membrane carrying fixed charges. The amount of fixed charges is governed by the dissociation of the functional groups in the membrane phase. The effect of pH on the degree of dissociation of these functional groups is taken into account. The difficulty of extensive use of Jacobi elliptic function in the numerical treatment of Poisson-Boltzmann equation can be circumvented by resorting to the present algorithm.     

Magnetic structure of Fe−Si−Al films implanted with Al and N ions

Changes in the magnetic structure of Fe–Si–Al films due to Al and N ion implantation were studied by⁵⁷Fe Conversion Electron Mössbauer Spectrometry (CEMS). The peaks of the magnetic sextets due to the crystalline films became broader by implantation with 5×10¹⁶ Al/cm², suggesting the formation of amorphous phases. In the CEM spectrum of one sample with large grains implanted with 1×10¹⁷ Al/cm² a crystalline -Fe phase appeared. N implantation with the same dose did not amorphize the sample but the components with high magnetic hyperfine fields were enhanced.     

Preparation of Saccharide-Silica Composites by a Sol-Gel Method and the Application for Optical Resolution of Metal Chelate Compounds

A novel organic-inorganic composite was prepared by a sol-gel process using hydrolysis and condensation of tetraethoxysilane (TEOS) reacted with a saccharide. During the process, ethoxy groups of the TEOS were replaced with hydroxyl groups of the saccharide and, consequently, saccharide molecules were combined with silica through their hydroxyl groups. Samples obtained under different reaction conditions were used for optical resolution of a metal chelate compound. The resolution ability of the composites was affected by the amount of water added for hydrolysis and of the saccharide. In particular, the amount of water drastically influenced the optical resolution performance. Composites obtained at the lower H2O/TEOS ratio gave the metal chelate compound a higher optical rotation. Three types of composites with the same composition were prepared by kneading, impregnation and by the sol-gel method, and were compared. The sol-gel composite showed the best optical resolution ability. It was concluded that the optical resolution ability was closely related to dispersibility of saccharide in the silica matrix.     

Effect of brain lesions on [3H]ohmefentanyl binding site densities in the rat striatum and substantia nigra.

We have recently demonstrated that [3H]ohmefentanyl, a non-peptidergic opioid ligand which was suggested to cross the blood brain barrier in contrast to other peptidergic opioid ligands, bound not only to mu opioid receptor sites but also to sigma sites. In order to examine whether [3H]ohmefentanyl can be used as a marker for mu sites, we investigated the effects of brain lesions on [3H]ohmefentanyl binding site densities, as compared with [3H][D-Ala2, MePhe4, Gly-ol5]enkephalin ([3H]DAGO), a selective mu ligand. These binding site densities were measured by quantitative autoradiography in the rat striatum and substantia nigra, two brain structures known to contain a high density of mu receptors, following lesions of the nigro-striatal dopaminergic pathway and striatal intrinsic neurons. Following unilateral nigral lesion with 6-hydroxydopamine, [3H]ohmefentanyl binding site densities were decreased in the patches (-35%) and matrix (-20%) of the ipsilateral striatum and in the lesioned substantia nigra pars compacta (-49%). Unilateral striatal lesion with quinolinic acid induced 72%, 61% and 50% decreases in [3H]ohmefentanyl binding in the patches and matrix of the lesioned striatum and in the ipsilateral substantia nigra pars reticulata, respectively. Similar results were obtained in the binding of [3H]DAGO. Indeed, a significant linear correlation was observed between [3H]ohmefentanyl and [3H]DAGO binding site densities. Therefore, mu opioid receptors may be mainly located on intrinsic neurons in the striatum, dopaminergic cell bodies in the substantia nigra pars compacta and nerve terminals of striatal efferents in the substantia nigra pars reticulata.(ABSTRACT TRUNCATED AT 250 WORDS)     

A transannular reaction during the base catalysed rearrangement of bicyclo(4.3.0)-2β-hydroxy-2α-vinyl-1β-Methyl-8-oxo-Δ6,7-nonene

Synthesis and rearrangement of bicyclo(4.3.0) - 2β - hydroxy - 2α - vinyl - 1β - methyl - 8 - oxo - Δ⁶ - nonene was observed to yield a transannular reaction product tricycio - (6.3.0.0^1,8) - 2 - methyl - 8α - hydroxy - 4 - oxo - Δ² - undecene 16. Spectral evidence supports the assigned structure.     

Cationic polymerization with boron halides. V. Synthesis of poly(isobutylene-b-styrene) and poly(styrene-b-isobutylene)

Block copolymers of isobutylene and styrene, PIB-b-PSt and PSt-b-PIB, have been prepared by a two-step synthesis involving (1) preparation of terminally chlorinated (telechelic) polyisobutylene or polystyrene “prepolymers” by using the H₂O/BCl₃ initiator system and (2) blocking from these telechelic prepolymers a second polymer segment by using an alkyaluminum, e.g., Et₂AlCl coinitiator. The telechelic polyisobutylene and polystyrene contain tertiary and benzylic chlorine termini, respectively. Block copolymer characterization included detailed selective solvent extraction procedures, coupled with GPC determinations, PMR, solubility, and intrinsic viscosity studies. The synthesis of PIB-b-PSt and PSt-b-PIB provides direct chemical evidence for the presence and position of active chlorine termini in BCl₃-coinitiated olefin polymerizations.     

Precise and accurate determination of the stoichiometry of CuInS2 semiconductor material by electrochemical methods

Summary CuInS₂ is one of the important I–III–VI₂ ternary compounds which has in recent years received increasing interest in semiconductor science. In this study an electrochemical method has been developed based on a limited amount of available sample (0.5–10mg) for the precise and accurate determination of CuInS₂ composition. After decomposition of the sample in concentrated HNO₃ under pressure, copper and indium were sequentially determined by constant potential coulometry, and sulfur (as sulfate) by amperometric titration. Various experimental parameters which ensure high precision and accuracy of the results were carefully evaluated and calibrated. The overall errors for the determination of copper, indium and sulfur in a 10 mg sample were found to be +0.10%, –0.12% and +0.16%, respectively, which fullfills the requirement for accurate stoichiometric assessment.

---

Reproduzierbare und genaue Bestimmung der Stöchiometrie von CuInS₂-Halbleitermaterial mit Hilfe elektrochemischer Verfahren

---

Presented at the 10th International Symposium on Microchemical Techniques, August 25–29, 1986, Antwerp, Belgium