Preparation of produced water reference material for analyzing 226Ra by gamma spectrometry

Journal of Radioanalytical and Nuclear Chemistry - Produced water reference material containing high concentration of 226Ra activity was prepared in 2009 and used for ALMERA worldwide proficiency...     

Comparison of Li+‐ion conductivity in linear and crosslinked poly(ethylene oxide)

Polymer electrolytes are of tremendous importance for applications in modern lithium‐ion (Li⁺‐ion) batteries due to their satisfactory ion conductivity, low toxicity, reduced flammability, as well as good mechanical and thermal stability. In this study, the Li⁺‐ion conductivity of well‐defined poly(ethylene oxide) (PEO) networks synthesized via copper(I)‐catalyzed azide–alkyne cycloaddition is investigated by electrochemical impedance spectroscopy after addition of different lithium salts. The ion conductivity of the network electrolytes increases with increasing molar mass of the PEO chains between the junction points which is completely opposite to the behavior of their respective uncrosslinked linear precursors. Obviously, this effect is directly related to the segmental mobility of the PEO chains. Furthermore, the ion conductivity of the network electrolytes under investigation increases also with increasing size of the anion of the added lithium salt due to a weaker anti‐plasticizing effect of the more bulky anions. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 21–28     

ZnO nanoparticles as chain elasticity reducer and structural elasticity enhancer: Correlating the degradating role and localization of ZnO with the morphological and mechanical properties of PLA/PP/ZnO nanocomposite

The main purpose of this study was to investigate the effect of zinc oxide (ZnO) nanoparticles on the morphological, mechanical, thermal, and rheological properties of PLA/PP blend. In this regard, nanocomposites containing 1, 3, and 5 wt% of ZnO nanoparticles were prepared by melt mixing. In addition, three different mixing procedures were adopted to study their effects on the microstructure of nanocomposites. The rheological behaviors demonstrated a higher elasticity and less compatibility for two phases in the case of nanocomposites containing nanoparticles in harmony with the morphological observations. Accordingly, it was correlated to the elasticity originating from the interphase, anticipated coalescence of dispersed particles as a result of degradation of PLA chains triggered by ZnO nanoparticles (ZnO‐NPs) and also agglomeration of ZnO‐NPs depending on the content of nanoparticles and chosen mixing procedure. It was also found that mixing method puts a remarkable influence on the microstructure and rheological behavior of nanocomposites. Results of mechanical characterizations and thermogravimetric analysis (TGA) also confirmed the degradation induced by ZnO nanoparticles.     

Effect of prior austenite grain size on the formation of carbide-free bainite in low-alloy steel

ABSTRACT

Inconsistencies exist in literature regarding the effect of prior austenite grain size (PAGS) on the extent and kinetics of bainite transformation. Attempts have been made in the present work to address these issues in a low-alloy carbide-free bainitic steel using dilatometry, over a range of PAGS. The bainite transformation kinetics in the above-mentioned conditions have been analysed quantitatively using established kinetic model to extract information related to the transformation mechanisms in such conditions. Greater obstruction from grain boundaries in fine-grained austenite restricts sheaves of bainite to develop completely and thereby reduces the volume fraction of bainite in comparison with coarse-grained austenite. Initial nucleation rate of bainite transformation increases with decreasing PAGS due to an increase in the nucleation site density. However, the maximum nucleation rate decreases consistently with decreasing PAGS due to gradual reduction in the autocatalytic factor.     

Experimental Study of High-Velocity Projectile Impact Welding

Experimental Techniques - The purpose of this study is to investigate the effect of various parameters on the welding process with high-velocity projectiles. For carrying out Impact Spot Welding...     

Higher‐order‐accurate numerical method for temporal stability simulations of Rayleigh‐Bénard‐Poiseuille flows

For Rayleigh‐Bénard‐Poiseuille flows, thermal stratification resulting from a wall‐normal temperature gradient together with an opposing gravitational field can lead to buoyancy‐driven instability. Moreover, for sufficiently large Reynolds numbers, viscosity‐driven instability can occur. Two higher‐order‐accurate methods based on the full and linearized Navier‐Stokes equations were developed for investigating the temporal stability of such flows. The new methods employ a spectral discretization in the homogeneous directions. In the wall‐normal direction, the convective and viscous terms are discretized with fifth‐order‐accurate biased and fourth‐order‐accurate central compact finite differences. A fourth‐order‐accurate explicit Runge‐Kutta method is employed for time integration. To validate the methods, the primary instability was investigated for different combinations of the Reynolds and Rayleigh number. The results from these primary stability investigations are consistent with linear stability theory results from the literature with respect to both the onset of the instability and the dependence of the temporal growth rate on the wave angle. For the cases with buoyancy‐driven instability, strong linear growth is observed for a broad range of spanwise wavenumbers. The largest growth rates are obtained for a wave angle of 90°. For the cases with viscosity‐driven instability, the linear growth rates are lower and the first mode to experience nonlinear growth is a higher harmonic with half the wavelength of the fundamental.     

Effect of Central Metal Ions of Analogous Metal–Organic Frameworks on Adsorption of Organoarsenic Compounds from Water: Plausible Mechanism of Adsorption and Water Purification

The adsorptive removal of organoarsenic compounds such as p‐arsanilic acid (ASA) and roxarsone (ROX) from water using metal–organic frameworks (MOFs) has been investigated for the first time. A MOF, iron benzenetricarboxylate (also called MIL‐100‐Fe) exhibits a much higher adsorption capacity for ASA and ROX than activated carbon, zeolite (HY), goethite, and other MOFs. The adsorption of ASA and ROX over MIL‐100‐Fe is also much more rapid than that over activated carbon. Moreover, the used MIL‐100‐Fe can be recycled by simply washing with acidic ethanol. Therefore, it is determined that a MOF such as MIL‐100‐Fe can be used to remove organoarsenic compounds from contaminated water because of its high adsorption capacity, rapid adsorption, and ready regeneration. Moreover, only one of three analogous MIL‐100 species (MIL‐100‐Fe, rather than MIL‐100‐Al or MIL‐100‐Cr) can effectively remove the organoarsenic compounds. This selective and high adsorption over MIL‐100‐Fe, different from other analogous MIL‐100 species, can be explained (through calculations) by the facile desorption of water from MIL‐100‐Fe as well as the large (absolute value) replacement energy (difference between the adsorption energies of the organoarsenic compounds and water) exhibited by MIL‐100‐Fe. A plausible adsorption/desorption mechanism is proposed based on the surface charge of the MOFs, FTIR results, calculations, and the reactivation results with respect to the solvents used in the experiments.     

High-performance sustainable tissue paper from agricultural residue: a case study on fique fibers from Colombia

Cellulose - Global sustainability megatrends are promoting the utilization of sustainably perceived fibers such as recycled and agricultural residue fibers in hygiene tissue applications. Tissue...     

Metal ion directed synthesis of 14–16 membered tetraimine macrocyclic complexes

A new series of 14–16 membered tetraazatetraimine macrocyclic complexes [ML1X2]-[ML3X2] [M=CoII, NiII and ZnII] and [CuL1]X2-[CuL3]X2 [X=Cl or NO3] have been synthesized by the template condensation of dibenzoylmethane with primary diamines in MeOH. The complexes were characterized by elemental analysis, i.r, 1H-n.m.r., e.p.r. and u.v-vis spectroscopy, as well as by conductivity and magnetic susceptibility measurements. The copper complexes exhibit square planar geometry, whereas an octahedral geometry is suggested for all other complexes.