Interfacial adsorption of microorganisms and its effect on oxygen absorption by fermentation broths

Steady-state mass transfer experiments were done to determine whether certain strains of bacteria in homogeneous suspension will accumulate at the gas:liquid interface and thereby significantly increase the oxygen transfer rate to the suspension. In particular, with suspensions ofB. licheniformis, the measured transfer rates are as much as three times the rate expected for a uniform suspension. In contrast, suspensions ofM. luteus show no increase in oxygen flux above expected values. The fact thatB. licheniformis is motile, whereasM. luteus is not suggests that cell motility may play an important role in the accumulation process.

     

Selective extraction of blood plasma exchangeable copper for isotope studies of dietary copper absorption

Measuring mineral absorption by fecal monitoring is labor-intensive and relies on good volunteer compliance. Blood indicators of absorption could be advantageous and we have developed a method for selective extraction-of recently absorbed (exchangeable) copper based on dialysis of plasma with histidine and subsequent copper extraction using Chelex resin. The potential for measuring copper absorption by transient enrichment of exchangeable copper with the stable isotope 65Cu from an ingested tracer, was also investigated. This method was compared with that of the fecal monitoring technique in a human volunteer, who consumed a 6 mg dose of 65Cu with inhibitors of copper absorption. Holmium was used as a non-absorbable rare-earth marker of unabsorbed tracer excretion, allowing estimation of re-secreted 65Cu (44 microg d(-1)), and hence calculation of true tracer absorption, which was only 10.8%. Monitoring plasma tracer kinetics showed potential for estimation of copper absorption without the need for fecal copper analysis.     

Charge transfer efficiency in hybrid bulk heterojunction composites

On the basis of recently published electrochemical measurements, the charge transfer efficiency within CdSe nanocrystal/conducting polymer heterojunction composites was investigated by means of luminescence interaction strength. It was found that poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-phenylenevinylene] and poly-9-vinylcarbazole luminescence was not totally quenched by nanocrystals, whereas poly-3-octylthiophene and polyvinylpyrrolidone was completely quenched. In case of poly-3-hexylthiophene, the nanocrystal luminescence was quenched. The results are in complete agreement with the electrochemical findings and thus, the CdSe nanocrystal/Polyvinylpyrrolidone composite should be a promising material for electroluminescent devices.     

Absorption and fluorescence spectroscopy of rhodamine 6G in titanium dioxide nanocomposites

A comparison has been made between the spectroscopic properties of the laser dye rhodamine 6G (R6G) in mesostructured titanium dioxide (TiO(2)) and in ethanol. Steady-state excitation and emission techniques have been used to probe the dye-matrix interactions. We show that the TiO(2)-nanocomposite studied is a good host for R6G, as it allows high dye concentrations, while keeping dye molecules isolated, and preventing aggregation. Our findings have important implications in the context of solid state dye-lasers and microphotonic device applications.     

Intermolecular potential and second virial coefficient of the water-hydrogen complex

We construct a rigid-body (five-dimensional) potential-energy surface for the water-hydrogen complex using scaled perturbation theory (SPT). An analytic fit of this surface is obtained, and, using this, two minima are found. The global minimum has C2v symmetry, with the hydrogen molecule acting as a proton donor to the oxygen atom on water. A local minimum with Cs symmetry has the hydrogen molecule acting as a proton acceptor to one of the hydrogen atoms on water, where the OH bond and H2 are in a T-shaped configuration. The SPT global minimum is bound by 1097 microEh (Eh approximately 4.359744 x 10(-18) J). Our best estimate of the binding energy, from a complete basis set extrapolation of coupled-cluster calculations, is 1076.1 microEh. The fitted surface is used to calculate the second cross virial coefficient over a wide temperature range (100-3000 K). Three complementary methods are used to quantify quantum statistical mechanical effects that become significant at low temperatures. We compare our results with experimental data, which are available over a smaller temperature range (230-700 K). Generally good agreement is found, but the experimental data are subject to larger uncertainties.     

Synthesis and photophysical properties of meso-substituted bisporphyrins: comparative study of phosphorescence quenching for dioxygen sensing

The 4,6-bis(10-mesityl-5,15-di-p-tolylporpyrinyl)dibenzothiophene (H4DPSN) free base was obtained in five steps from commercially available materials. The metalation of DPSN2- with zinc(II), copper(II), and palladium(II) led to three new homobimetallic systems, (Zn)2DPSN, (Cu)2DPSN, and (Pd)2DPSN, respectively. The cofacial structures of these molecules offer the possibility of having dioxygen molecules inside the cavity for a period of time, allowing dynamic (collisional) phosphorescence quenching to be more efficient. The bimolecular excited-state deactivation rate constant for deactivation by dioxygen (kQ: (Pd)2DPB, 2.98x10(9); (Pd)2DPSN, 3.99x10(9); (Pd)2DPX, 6.94x10(9); (Pd)TPP, 8.95x10(9); (Pd)2DPS, 8.95x10(9) M-1 s-1) of (Pd)2DPSN, which exhibits an intense phosphorescence at 699 nm, was compared to those observed for (Pd)TPP, (Pd)2DPS, (Pd)2DPX, and (Pd)2DPB (TPP2-=tetraphenylporphyrin dianion, DPS4-=4,6-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]dibenzothiophene tetraanion, DPX4-=4,5-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]-9,9-dimethylxanthene tetraanion, and DPB4-=1,8-bis[5-(2,8,13,17-tetraethyl-3,7,12,18-tetramethylporphyrinyl)]biphenylene tetraanion). These collision-induced deactivation data were interpreted by estimating a series of physical parameters such as the surface area and bisporphyrin radii, the diffusion coefficient of the bismacrocycles, and the theoretical deactivation efficiency for the five compounds addressing the role of steric hindrance of the macrocycles on each other and the aryl groups at the meso positions. For sensing purposes, (Pd)2DPX is characterized by a Stern-Volmer constant kSV of 2.91x10(6) M-1, placing the lower detection limit for [O2] in solution at 0.58 ppm, which is better than that for (Pd)TPP (kSV=2.31x10(6) M-1; lower detection limit of 0.73 ppm), the classically used monoporphyrin complex.     

Identification by gas chromatography and mass spectrometry of lipids from the rat Harderian gland

Lipids from rat Harderian glands were extracted with ethyl acetate, hydrolysed with base and examined by gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) as trimethylsilyl (TMS), [2H9]TMS, methyl ester-TMS, picolinyl, nicotinate and nicotinylidene derivatives. The latter three derivatives were used to reveal the structures of the alkyl chains of fatty acids, alcohols and glycerol ethers, respectively. Forty-eight compounds were identified, representing about 97% of the total extracted lipids as measured by GC peak areas. The major constituents were fatty acids with chain lengths from 12 to 22 carbon atoms (mainly C18 and C20) and fatty alcohols (C16 to C26) derived from wax esters. Most of these acids and alcohols were unsaturated in the omega-7 position and were accompanied by smaller amounts of the saturated and omega-5 monounsaturated analogues. glycerol ethers were also identified for the first time in this secretion; the ether chains contained from 14 to 19 carbon atoms (mainly 16) and were straight-chain saturated, unsaturated (omega-5 and omega-7) and branched (iso). The only sterol found was cholesterol amounting to 1.24% of the total extract.     

The Role of Multiple Teaching Strategies in Promoting Active Learning in Organic Chemistry

We have introduced four alternative teaching strategies into our yearlong organic chemistry course and have assessed changes in student performance relative to the same course taught by the same instructors using a more traditional lecture format. These strategies, which include reading worksheets, dialogues, in-class worksheets, and role-playing, allow the professor to move through a learning cycle that may effectively accommodate the students needs and multiple learning styles. The reading worksheets guide students through the concept phase and dialogues help students identify the importance of the concepts as they articulate these ideas for themselves. Group worksheets and role-playing provide opportunities for peer-interaction, application of knowledge, creativity, and self-expression. Others have shown that active learning strategies neither enhance nor diminish a students ability to retain factual information, a finding that is supported by our study. Our data from this one study show, however, that students taught by a more traditional approach demonstrate a greater variation in final exam performance between first and second semesters than those taught using a combination of techniques. This result reflects a shift in emphasis from the professor as an information source to the actively engaged student taking responsibility for his or her own learning. This study suggests that these methods, when used in a consistent fashion in conjunction with interactive lecturing, provide a broad base to facilitate student learning and aid in the development of higher order thinking skills.