Chemo-enzymatic synthesis of 4-methylumbelliferyl beta-(1-->4)-D-xylooligosides: new substrates for beta-D-xylanase assays

Transglycosylation catalyzed by a beta-D-xylosidase from Aspergillus sp. was used to synthesize a set of 4-methylumbelliferyl (MU) beta-1-->4-D-xylooligosides having the common structure [beta-D-Xyl-(1-->4)]2-5-beta-D-Xyl-MU. MU xylobioside synthesized chemically by the condensation of protected MU beta-D-xylopyranoside with ethyl 2,3,4-tri-O-acetyl-1-thio-beta-D-xylopyranoside was used as a substrate for transglycosylation with the beta-D-xylosidase from Aspergillus sp. to produce higher MU xylooligosides. The structures of oligosaccharides obtained were established by 1H and 13C NMR spectroscopy and electrospray tandem mass spectrometry. MU beta-D-xylooligosides synthesized were tested as fluorogenic substrates for the GH-10 family beta-D-xylanase from Aspergillus orizae and the GH-11 family beta-D-xylanase I from Trichoderma reesei. Both xylanases released the aglycone from MU xylobioside and the corresponding trioside. With substrates having d.p. 4 and 5, the enzymes manifested endolytic activities, splitting off MU, MUX, and MUX2 primarily.     

Automated multi-attribute method sample preparation using high-throughput buffer exchange tips

Rationale

The multi-attribute method (MAM) has become a valuable mass spectrometry (MS)-based tool that can identify and quantify the site-specific product attributes and purity information for biotherapeutics such as monoclonal antibodies (mAbs) and fusion molecules in recent years. As we expand the use of the MAM at various stages of drug development, it is critical to enhance the sample preparation throughput without additional chemical modifications and variability.

Methods

In this study, a fully automated MAM sample preparation protocol is presented, where rapid desalting in less than 15 minutes is achieved using miniaturized size-exclusion chromatography columns in pipette tips on an automated liquid handler. The peptide samples were analyzed using an electrospray ionization (ESI) orbitrap mass spectrometer coupled to an ultra-high-performance liquid chromatography (UHPLC) system with a dual column switching system.

Results

No significant change was observed in product attributes and their quantities compared with manual, low-artifact sample preparation. The sample recovery using the buffer exchange tips was greatly enhanced over the manual spin cartridges while still demonstrating excellent reproducibility for a wide variety of starting sample concentrations. Unlike a plate desalting system, the individual columns provide flexibility in the number of samples prepared at a time and sample locations within plates.

Conclusions

This automated protocol enables the preparation of up to 96 samples with less “at-bench” time than the manual preparation of a smaller batch of samples, thereby greatly facilitating support of process development and the use of the MAM in quality control.

     

Simple algorithm for isothermal-isobaric molecular dynamics

We review principles of non-Hamiltonian statistical mechanics and present a new set of equations and integration algorithm for isothermal-isobaric dynamics. The chief advantage of the present scheme is that it is somewhat simpler than previous methods. We perform numerical simulations to test the accuracy of the algorithm and compare its stability to that of a "gold standard," a symplectic integrator for Hamiltonian dynamics of the same system. The stability of the isothermal-isobaric algorithm is comparable to the stability of the symplectic integrator.     

Synthesis,Crystal Structure,and Spectral Properties of a Cobalt(II) Complex with N‐Salicylidene‐p‐Toluidine

The complex Co(C₁₄H₁₃NO)₂Cl₂ with the protonated N‐salicylidene‐p‐toluidine ligand was synthesized from an ethanolic solution of CoCl₂·6H₂O and N‐salicylidene‐p‐toluidine. The crystal structure was determined from X‐ray single crystal data (monoclinic, space group Cc, a = 1496.2(3) pm, b = 1257.4(4) pm, c = 1544.6(3) pm, β = 115.01(1)°, Z = 4). Co²⁺ adopts a distorted tetrahedral geometry. The UV‐Vis and IR spectra of the complex are discussed.     

Second-order nonlinear optical properties of side-chain liquid crystalline polymers studied by second harmonic generation from thin films

The two independent elements of the second-order nonlinear optical susceptibility tensor of a range of contact poled, donor–acceptor substitued side-chain polymers are reported. The susceptibilities were measured by second harmonic generation from thin films, typically less than 0.5 μm thick, at a fundamental wavelength of 1064 nm. The largest value was χ = 2.64 pm/V which is three times greater than the χ value of KDP and was measured in a nitrobenzylidene side chain, polyhydroxystyrene polymer with an eleven unit alkyl chain spacer attaching the side group to the backbone. Typical susceptibility values obtained were χ～0.3 pm/V and X⁽²⁾₃₃～1 pm/V. The coherence lengths of the materials, which lay in the range 4–12 μm, were measured at 1064 nm by the maker fringe technique using thick, wedge-shaped samples.     

Beiträge zur Untersuchung anorganischer nichtstöchiometrischer Verbindungen. XIV. Oxydationsprodukte von orthorhombischem Nb12O29 Elektronenoptische Untersuchung

Contributions to the Investigation of Inorganic Non-stoichiometric Compounds. XIV. Oxidation Products of Orthorhombic Nb₁₂O₂₉, Electron Optical Investigation An electron optical investigation shows that the orthorhombic starting material Nb₁₂O₂₉(BII) is well ordered. The oxidation products Nb₂O₅(Ox1BII) and Nb₂O₅(Ox2BII) are different from each other in structures as well as in their reactions. Nb₂O₅(Ox1BII) is unstable in the electron beam and differs from BII by characteristic point-defects. The radiation load can lead to the reduction to BII or to a transition into a defect structure with R-type-tunnels. The not well ordered structure of Nb₂O₅(Ox2BII) is stable in the electron beam. Characteristic is the sequence of [2×5] and [3×4] blocks, the latter in two different orientations. The observed composition O/Nb = 2.500 can be described by the present structural modell assuming vacant niobium tetrahedral sites. The large structural differences between the oxidation products of the orthorhombic and the monoclinic Nb₁₂O₂₉ are remarkable.     

X-ray magnetic circular dichroism of Pseudomonas aeruginosa nickel(II) azurin

We show that X-ray magnetic circular dichroism (XMCD) can be employed to probe the oxidation states and other electronic structural features of nickel active sites in proteins. As a calibration standard, we have measured XMCD and X-ray absorption (XAS) spectra for the nickel(II) derivative of Pseudomonas aeruginosa azurin (NiAz). Our analysis of these spectra confirms that the electronic ground state of NiAz is high-spin (S = 1); we also find that the L(3)-centroid energy is 853.1(1) eV, the branching ratio is 0.722(4), and the magnetic moment is 1.9(4) mu(B). Density functional theory (DFT) calculations on model NiAz structures establish that orbitals 3d(x2-y2) and 3d(z2) are the two valence holes in the high-spin Ni(II) ground state, and in accord with the experimentally determined orbital magnetic moment, the DFT results also demonstrate that both holes are highly delocalized, with 3d(x2-y2) having much greater ligand character.     

Photometrische Bestimmung von Antimon mit Methylfluoron

Zusammenfassung Es wird eine Arbeitsvorschrift zur photometrischen Bestimmung kleiner Mengen Antimon mit Methylfluoron beschrieben. Die günstigsten Arbeitsbedingungen und die Störung durch Fremdionen werden untersucht. Das Extinktionsmaximum liegt bei 530 nm. Die photometrische Bestimmung wird bei 495 nm durchgeführt. Das Beersche Gesetz ist im Bereich von 0,2– 4 g Sb/ml erfüllt, die Bestimmungsgrenze liegt bei 0,21 g Sb/ml · cm. Der Zeitbedarf einer Einzelbestimmung beträgt 15–20 min.Für die sorgfältige Durchführung der zahlreichen Versuche sprechen wir Herrn H. Siffrin unseren Dank aus.     

A multitechnique surface analytical study of a segmented block copolymer poly(ether-urethane) modified through an H2O radio frequency glow discharge

Recent work in our laboratories has fully characterized the surface region of a segmented poly(ether-urethane) (PEU) extending from the air/polymer interfacial region through bulk depths in the micron range. This characterization utilized energy and angle dependent Electron Spectroscopy for Chemical Analysis (ESCA), Attenuated Total Reflectance–Fourier Transform Infrared Spectroscopy (ATR–FTIR), and Comprehensive Wettability Profiling (contact angle using a homologous series of liquids) as defined by Zisman. In this study this same multi-analytical-technique approach is used to elucidate changes in these PEU surfaces induced through an H₂O Radio Frequency Glow Discharge (RFGD) plasma. This investigation reports both qualitative and quantitative changes due to the modification treatments as well as the permanency of the changes effected on these surfaces through the plasma treatment. From our analyses, the amount of surface residing polyurethane (hard segment) is observed to increase due to a proposed plasma etching mechanism. Further, the addition of oxygen containing functionality is detected at the modified surfaces unique with respect to the unmodified PEU. These surface modifications which show large increases in wettability, are finally observed to be semi-permanent over a time period of 6 months.     

Inner-sphere electron-transfer reorganization energies of zinc porphyrins

Inner-sphere electron-transfer reorganization energies of Zn(protoporphyrin IX) and Zn(octaethylporphyrin) are determined from band-shape analyses of the first ionization obtained by gas-phase valence photoelectron spectroscopy. The experimentally determined total inner-sphere reorganization energies for self-exchange (120-140 meV) indicate that structural changes upon oxidation are largely confined to the porphyrin ring, and substituents on the ring or solvent and other environmental factors make smaller contributions. Computational estimates by different models vary over a wide range and are sensitive to numerical precision factors for these low reorganization energies. Of current computational models that are widely available and practical for molecules of this size, functionals that contain a mixture of Hartree-Fock exchange and DFT exchange-correlation appear to be the most applicable.