Evaluating the residence time for cesium removal from simulated Hanford tank wastes using SuperLig® 644 resin

Batch contact and column experiments were performed to evaluate the effect of residence time on cesium removal from two simulated Hanford tank wastes using SuperLig^® 644 resin. The two waste simulants mimic the compositions of tanks 241-AZ-102 and 241-AN-107 at the U.S. Department of Energy (DOE) Hanford site. A single column made of glass tube (2.7-cm i.d.), which contained ~100 ml of H-form SuperLig^® 644 resin was used in the column experiments. The experiments each consisted of loading, elution, and regeneration steps were performed at flow rates ranging from 0.64 to 8.2 BV/h for AZ-102 and from 1.5 to 18 BV/h for AN-107 simulant. The lowest flow rates of 0.64 and 1.5 BV/h were selected to evaluate less than optimal flow conditions in the plant. The range of the flow rates is consistent with the River Protection Project design for the waste treatment plant (WTP) columns, which will operate at a flow rate between 1.5 to 3 BV/h. Batch contact experiments were also performed for two batches of SuperLig^® 644 to determine the equilibrium distribution coefficients (K _d) as a function of Cs concentration. The column experiments revealed that adequate column loading for Cs on SuperLig^® 644 (50% breakthrough at 100 bed volumes) can be achieved for the two simulated Hanford tank wastes at the nominal plant flow rates of 1.5 and 3 BV/h (residence times 40 and 20 minutes). The column performance was marginally improved at flow rates below the nominal rates. At flow rates higher than the nominal, the Cs loading deteriorated significantly. The SuperLig^® 644 was eluted effectively with 0.5M nitric acid. The elution required approximately 15 BVs to reduce Cs concentration to below 1% of initial Cs concentration in the feeds.     

Facile fabrication of AgCl@polypyrrole-chitosan core-shell nanoparticles and polymeric hollow nanospheres

A one-step sequential method for preparing AgCl@polypyrrole-chitosan core-shell nanoparticles and subsequently the formation of polypyrrole-chitosan hollow nanospheres is reported. The formation of the core and the shell is performed in one reaction medium almost simultaneously. Transmission electron microscopy (TEM) images show the presence of core-shell nanoparticles and hollow nanospheres. Ultraviolet-visible (UV-vis) studies reveal that AgCl was formed first followed by polypyrrole. X-ray diffration (XRD) and UV-vis studies show that AgCl was present in the core-shell nanoparticles and could be removed completely from the core.     

A precise PKPβ+ measurement at Z = 55: (I). The mass of 130Cs

The Q-value for the ¹²⁹Xe(³He, d)¹³⁰Cs reaction is measured to be +5 ± 20 keV. By combining this result with the known neutron separation energy of ¹³⁰Xe, we derive the total decay energy of ¹³⁰Cs

¹³⁰Xe to beQ_EC = 2974 ± 20 keV. This value agrees well with two previous positron end-point measurements but disagrees with the corresponding value derived from the 1977 atomic mass evaluation. This has significance in testing the accuracy of the calculated ratio for ¹³⁰Cs decay. The mass excess of ¹³⁰Cs is derived to be ?86908 ± 14 keV. An excited state in ¹³⁰Cs. was also identified at 121 ± 15 keV with J < 3 and positive parity. The Q-value for ¹³⁶Xe(³He, d)¹³⁷Cs was measured to be 1918 ± 12 keV.     

Enantioselective separation in capillary electrophoresis using a novel mono-6-propylammonium-β-cyclodextrin as chiral selector

The chiral resolving ability of a novel single-isomer cationic β-cyclodextrin (CD), mono-6^A-propylammonium-6^A-deoxy-β-cyclodextrin chloride (PrAMCD), as a chiral selector in capillary electrophoresis (CE) is reported in this work for the enantioseparation of hydroxy, carboxylic acids and amphoteric analytes. The effect of chiral selector concentration on the resolution was studied. Good resolutions were achieved for hydroxy acids. Optimum resolutions were obtained even at 3.5 mM CD concentration for carboxylic acids. The electrophoretic method showed good linearity and reproducibility in terms of migration times and peak areas, which should make it suitable for routine analysis. In addition, baseline chiral separation of a six-acid mixture was achieved within 20 min. PrAMCD proved to be an effective chiral selector for acidic analytes.     

UV/Vis Spectroscopic Properties of N -(2′-Hydroxy-4′- N , N -dimethyl-aminobenzylidene)-4-nitroaniline in Various Solvents and Solid Environments

 N-(2′-Hydroxy-4′-N,N-dimethylaminobenzylidene)-4-nitroaniline [HDBN] has been used as a model for investigating intra- and intermolecular D–A (donor–acceptor) interactions in various environments by means of UV/Vis spectroscopy. UV/Vis spectra of HDBN have been measured in various solvents, ethanolic solutions of different pH, adsorbed on silica, and in the solid state. A bathochromic shift of ν_max is observed with increasing the dipolarity/polarizability and HBD (hydrogen bond donor) capacity of the solvent, which is described by means of a multiple LSE (linear solvation energy) relationship in terms of the empirical Kamlet-Taft solvent polarity parameters. The adsorption of HDBN on Aerosil^? 300-silica particles in non-HBA (hydrogen bond acceptor) solvents is explained in the same sense. Mobile protons and sol–gel entrapping cause a hypsochromic shift due to protonation of the lone electron pair of the 4′-N,N-dimethylamino group. Hydroxide ions attack the 2′-hydroxy group which causes a bathochromic shift. A strong intramolecular hydrogen bond between the 2′-hydroxyl hydrogen and the imine nitrogen atom is present in the solid-state structure causing an unprecedented bathochromic shift.     

Chemical ionization desorption mass spectrometry of some quaternary ammonium salts

The ammonia chemical ionization desorption spectra of N,N-dimethyl quaternary ammonium iodides in addition to high protonated molecular ion [M + H]⁺ intensity, show signals for an ion radical composed of N-methyl abstracted salt cation and ammonia [C + NH₃? CH₃]^+˙. These ions corresponding to the cation +2 show increased importance in the chemical ionization mode, using the same reagent gas. The technique of chemical ionization desorption appears suitable for the analysis of salts, and thus for the determination of the molecular weight of both anion and cation.     

APPLICATIONS OF MULTICOMPONENT ASSEMBLY PROCESSES TO THE FACILE SYNTHESES OF DIVERSELY FUNCTIONALIZED NITROGEN HETEROCYCLES

Several multicomponent assembly processes have been developed for the synthesis of intermediates that may be elaborated by a variety of cyclizations to generate a diverse array of highly functionalized heterocycles from readily-available starting materials. The overall approach enables the efficient preparation of libraries of small molecules derived from fused, privileged scaffolds.     

Acid-Catalyzed Cyclodehydration of Quinazolone Prepolymers

The effect of p-toluenesulfonic acid and phosphoric acid on the cyclodehydration of quinazolone prepolymers has been investigated. Isothermal weight loss during the curing process was monitored closely to follow the extent of cyclization. The optimum weight loss corresponding to 2 mol water is used as an indication of the formation of a fully cyclized quinazolone structure without concurrent decarboxylation. This can be achieved by incorporating the catalyst at 2 wt% concentration, which permits a lower curing temperature than those previously reported. The polymers formed in the presence of catalyst have thermal stability superior to those prepared without catalyst. The glass transition temperature is also raised. This we conclude to be a direct result of the decrease in the amount of incomplete quinazolone rings along the polymer backbone as a result of more efficient cyclization catalyzed by the acids.