Use of azolium ylides in the synthesis of con-densed heterocyclic systems from 2-quinox-alylacetonitriles

The reaction of -substituted 2-quinoxalylacetonitriles with 1-alkyl(aryl)imidazoles, -benzimidazoles, -1,2,4-triazoles and 5,6-dihydroimidazo[i,j]quinoline was studied. It was found that during the course of the reaction an unusually easy dealkylation of the azole ring takes place, while the aryl substituent is not split off. A reaction mechanism has been proposed including the formation of an ylide intermediate, followed by subsequent electrophilic attack on the C₍₂₎ position of the azolium ring. The applicability boundaries of the reaction studied and the spectral characteristics of the synthesized compounds were investigated.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 2, pp. 224–229, February, 1993.     

Analytical applications of crown ethers : III. Extraction and determination of nitrophenol isomers

The oxidation of aldehydes by dicyclohexyl-18-crown-6-potassium permangante complex is presented. Results obtained by this procedure showed that the presence of crown ether (DCC) and the catalyst play an important role in the oxidation of the aldehydes. The stoichiometry found corresponds to 2 μeq of permanganate per 1 μmol of aldehydes in all cases. Alcohols and ketones are not oxidized. Finally, a method for quantitative evaluation of aldehydes is proposed.     

Crystallization of filled nylon 6 III. Non-isothermal crystallization

Summary DSC data on crystallization kinetics from the melt at different cooling rates of nylon 6 containing various amonts of untreated and surface-treated fillers, were analyzed in terms of a modified Kolmogorov-Avrami equation. It was established that mechanism of crystallinity development in molten nylon 6 does not change appreciably in presence of aminosilane-treated glass beads and small amounts of untreated glass beads, whereas time exponentn was found to decrease with increasing filler content in samples containing untreated glass beads and Aerosil. On the other hand, dependence of temperature of the onset of crystal nucleation on cooling rate obeyedm = 2 law for pure nylon 6 and samples containing surface-treated filler, whilem = 4 law seemed to hold for samples containing large amounts of untreated fillers at low cooling rates (m is the exponent at degree of supercooling). It was concluded that although isothermal conditions of crystallization should be preferred for further quantitative investigations of polymer-filler interactions in highly filled polymer melts, the above results qualitatively are consistent with trends discovered in isothermal crystallization experiments.     

Enthalpimetric and thermometric determination of some nitrogen containing bases and some physiologically active alkaloids

Summary The enthalpimetric determination of a series of bases by using the reaction of the bases and sodium tetraphenylboron is described. The accuracy of the method is analytically acceptable, over the range 3×10^–5 moles to 7.5×10^–4 moles. The upper limit is determined by the bulk of the precipitate.Dosage forms of some physiologically active alkaloids contain more than the upper limit of analyte. Yet, preliminary investigations using silicotungstic acid indicate that this is suitable for thermometric titrations.

---

Enthalpimetrische und thermometrische Bestimmung stickstoffhaltiger Basen und physiologisch aktiver Alkaloide

Zusammenfassung Die enthalpimetrische Bestimmung einiger N-haltiger Basen erfolgte aufgrund der Reaktion mit Natriumtetraphenyloborat. Die Genauigkeit ist im Bereich von 3 · 10^–5-7,5 · 10^–4 Mol befriedigend. Eine obere Grenze der Anwendbarkeit ergibt sich aus der Menge des anfallenden Niederschlags. Diese wird bei der Bestimmung von Formulierungen einiger physiologisch aktiver Alkaloide überschritten. Jedoch ist in diesem Fall eine thermometrische Titration mit Hilfe von Silicowolframsäure möglich.

Lecture presented at Euroanalysis I Conference, 28. 8.–1. 9. 1972 in Heidelberg, Germany.     

Über Hexagonale Perowskite mit Kationenfehlstellen. I. Verbindungen vom Typ Ba2B□2/3ReVIIO6

On Hexagonal Perovskites with Cationic Vacancies. I. Compounds of the Type Ba₂B □_2/3Re^VIIO₆ Compounds of Type Ba₂B□_2/3Re^VIIO₆ are formed with B^III = Sm? Gd Ho? Lu, Y, Sc, In (yellow); Tb (black-brown); Dy (yellow-orange). They crystallize with B^III = Sm? Lu, Y and Sc in a rhombohedral layer structure of 12 L-type (space group R3 m; sequence: cchhcchhcchh) with 6 formula units in the unit cell.     

Automation of the gas analysis of14C-labelled compounds utilizing a piston-type counter tube

In this paper an automatic apparatus designed for the radioactivity measurement of¹⁴C-labelled organic compounds in the gaseous phase is described. The labelled organic compounds are combusted in a mixture of argon and oxygen. After combustion the oxygen content of the gas is eliminated by passing it through a copper packing. The water and heteroelements present are also removed and the radioactive carbon dioxide gas is swept by argon carrier gas into a piston-type counter tube. In the counter tube the piston forming a dividing wall moves forward in accordance with the rate of combustion and sweeping, and thus sucks the gases leaving the combustion tube into the effective tube volume. The anode wire is carried by a reel located in the piston and a spring device ensures its stretched state. At the end of the sweeping period methane is fed into the counter tube and the activity of the argon—methane—carbon dioxide mixture is measured in the limited proportional region. Manual and automatic operation is possible. The piston-type counter tube provides possibility for strandardization by means of extrapolation and for measurement of absolute activities.     

Photochemistry of imidazolides. I. The photo-Fries-type rearrangement of N-substituted imidazoles.

A number of N-substituted imidazoles 1a–1i have been found to photo-isomerize to give the corresponding 2-substituted- and 4(or 5)-substituted imidazoles ( 2a–2i and 3a–3i ). The role of a dissociative path in these reactions has been demonstrated.     

Mechanism of the oxidation of cycloheptanone by chloramine-T

The oxidation kinetics of cycloheptanone by chloramine-T in alkaline media has been investigated. A mechanism involving the formation of an intermediate by the interaction between the enolic anion of cycloheptanone and chloramine-T in a slow step followed by its interaction with another molecule of chloramine-T in a fast step leading to products has been proposed. The scheme satisfactorily accords with the observed stoichiometry, negligible influence of ionic strength and a positive dielectric effect. Various rate parameters have been computed and 1.2-cycloheptanedione identified as the end product.With 2 Figures     

Copolymerization characteristics of S-vinyl-O-tert-butylthiocarbonate

Poly-S-vinyl-O-tert-butylthiocarbonate is an excellent precursor to poly(vinyl mercaptan) because the tert-butyloxycarbonyl blocking group can be removed by either acid hydrolysis or thermolysis under conditions which minimize the oxidation of the liberated mercaptan to disulfide. Dilatometric studies of the homopolymerization of S-vinyl-O-tert-butylthiocarbonate demonstrated that the polymerization rate was directly proportional to the concentration of free-radical initiator; no thermal initiation was observed. The molecular weight of the homopolymers and copolymers ranged from 30,000 to 50,000 (GPC). Copolymerization of S-vinyl-O-tert-butylthiocarbonate (M₂) with styrene, (r₁ = 3.0, r₂ = 0.2), methyl methacrylate (r₁ = 1.40, r₂ = 0.17) and vinyl acetate (r₁ = 0.04, r₂ = 11.0) indicated that a sulfur atom adjacent to the vinyl group increases the resonance stability (Q₂ = 0.5) and the electron density (e₂ = ?1.4) of the double bond and the corresponding radical. Water-soluble copolymers could be prépared by incorporating either N-vinylpyrrolidone (r₁ = 0.12, r₂ = 3.94) or N-isopropylacrylamide (r₁ = 1.17, r₂ = 0.3) with M₂. The water solubility of the copolymers decreased markedly when the tert-butyloxycarbonyl group was removed. Copolymers of M₂ with N-vinyl-O-tert-butylcarbamate (r₁ = 0.13, r₂ = 5.10) were utilized to prepare crosslinked poly(vinyl amine–vinyl mercaptan); the crosslinking resulted from urea linkages formed during thermolysis of the copolymer.     

Infrared spectra of cyclic ethers and their derivatives

Data for the characteristic bands of cyclic ethers are reviewed. The infrared spectra of a number of 2-mono- and 2, 5-di-substituted derivatives of tetrahydrofuran are investigated. Absorption bands at about 900 cm⁻¹ are related to pulsation vibrations, and those at about 1200 cm⁻¹ to antisymmetric skeletal vibrations, of the tetrahydrofuran ring. It is shown that to confirm the presence of a tetrahydrofuran ring in a molecule, it is necessary to take into account not only the band of valence antisymmetric vibrations of the group C-O-C (ν _C-O-C ^as 1075 cm⁻¹), but also bands due to ring pulsation vibrations (ring symmetric valence vibrations ν _sk ^s ∼ 900 cm¹).