LC–MS/MS method for the quantification of masitinib in RLMs matrix and rat urine: application to metabolic stability and excretion rate

Masitinib (MST) is a selective tyrosine kinase inhibitor. Validated liquid chromatography tandem mass spectrometric method (LC–MS/MS) was developed for the quantification of MST in rat liver microsomes (RLMs) matrix. The developed method was applied to metabolic stability and excretion rate studies. Reversed phase liquid chromatography was used for resolution of MST and bosutinib (IS) using C₁₈ (50 mm × 2.1 mm, 1.8 μm). Binary solvent system consisted of 35% solvent A (0.1% formic acid in H₂O, pH: 3.2) and 65% solvent B (acetonitrile) used as mobile phase at flow rate of 0.25 mL with a total run time of 5 min. Injection volume was 5 µL. Generation of ions was done in positive ESI source and quantification of MST and IS were done using MRM mode. The developed method showed a linearity in the range of 5–200 ng/mL (r² ≥ 0.9992) with LOQ and LOD of 0.25 and 0.76 ng/mL in RLMs. The intra- and inter-day precision and accuracy ranged from 0.95 to 1.49 and ? 5.22 to 1.13%, respectively in RLMs. Rate of disappearance of MST during incubation with RLMs was almost linear allover incubation time. In vitro t_1/2 was 50.38 min and CL_in was 3.11 ± 0.2. The developed method was applied also to measure the rate of masitinib excretion in rat urine. The method can used for further pharmacokinetic studies of MST.     

Experimental investigation of commercially available lead composite aprons used for diagnostic X-rays

One of the principal diagnostic methods used in all fields of medical services is radiographic examination. To keep the radiation dose received by hospital personnel under normal working conditions as low as reasonably achievable, lead composite apron shields are provided as valuable aids. Intensive use of these accessories could lead to softening and surface defects due to poor handling and being worn-out over time, giving rise to multiple defects across the entire apron. Without routine control, these lead aprons will, within time, contribute significantly to the over-radiation burden to the wearer. However, local defects are highly likely to lead to gross changes in the radiation dose received by the wearer. For this reason, we evaluate the exposure dose resulting from diagnostic X-ray radiation during different imaging procedures. In this study, we used TLD LiF-700 chips to measure the attenuation percentage for four groups of commercial lead composite aprons and to calculate the effective doses to different organs during diagnostic radiological procedures. The results show the importance of lead composite aprons in minimizing effective doses, and the attenuation percentage varied for different vendors; this is due to variations in the constituent material. The average attenuation for lead composite aprons varies from 93.3% to 96.7%, and the average attenuation (%)/weight varies from 16.7% to 20.5%. Acceptance testing of lead composite aprons is essential to ensure that lead composite aprons meet their manufacturers’ specifications and provide the necessary radiation protection for their intended use. The combined and expanded uncertainties accompanying these measurements are 2.78% and 5.57%, respectively.     

Template synthesis of cyanine dye H-aggregates on nanostructured [6,6]-phenyl C61-butyric acid methyl ester substrates

A novel and general method for the synthesis of H-aggregates is presented. H-aggregates can be precipitated from solutions of cyanine dyes in nanostructured [6,6]-phenyl C(61)-butyric acid methyl ester (PCBM) template films. H-aggregates synthesized that way have a narrow line shape width comparable to the smallest H-bands reported for thin films so far. We demonstrate that H-aggregates can be induced in different cyanine dyes (trimethine-, pentamethine- and heptamethine dyes). Aggregation follows a universal pathway, the concentration dependence of aggregation for different dyes can be scaled to fall onto one master curve. According to our model, H-aggregates have the form of 3D-crystals that form within cavities of the template. The template substrate is fabricated by means of a phase separation process of PCBM with a specific cyanine dye and consecutive selective dissolution of the dye. The dimensions of the template cavities have a major influence on aggregation.     

Synthesis of tri-substituted biaryl based trianglimines: formation of C3-symmetrical and non-symmetrical regioisomers

2-Functionalised aromatic monoaldehydes were synthesised in good to excellent yields by reacting 4-bromo-2-fluorobenzaldehyde with different secondary amines and phenol. The Suzuki-coupling reaction of the newly functionalised aromatic monoaldehydes with 4-formylphenylboronic acid afforded the corresponding 2-functionalised-4,4'-biphenyldialdehydes in good yields (47-85%). The [3+3]-cyclocondensation reactions of the 2-functionalised-4,4'-biphenyldialdehydes with (1R,2R)-1,2-diaminocyclohexane afforded a mixture of regioisomeric C(3)-symmetrical and non-symmetrical trianglimines. Reduction of the C(3)-symmetrical and the non-symmetrical trianglimines with NaBH(4) in a mixture of THF and MeOH afforded the corresponding trianglamines in high yields.     

Oxidation of phenol by hydrogen peroxide catalyzed by metal-containing poly(amidoxime) grafted starch

Polyamidoxime chelating resin was obtained from polyacrylonitrile (PAN) grafted starch. The nitrile groups of the starch-grafted polyacrylonitrile (St-g-PAN) were converted into amidoximes by reaction with hydroxylamine under basic conditions. The synthesized graft copolymer and polyamidoxime were characterized by FTIR, TGA and elemental microanalysis. Metal chelation of the polyamidoxime resin with iron, copper and zinc has been studied. The produced metal-polyamidoxime polymer complexes were used as catalysts for the oxidation of phenol using H(2)O(2) as oxidizing agent. The oxidation of phenol depends on the central metal ion present in the polyamidoxime complex. Reuse of M-polyamidoxime catalyst/H(2)O(2) system showed a slight decrease in catalytic activities for all M-polyamidoxime catalysts.     

Extractive-spectrophotometric methods for determination of anti-Parkinsonian drug in pharmaceutical formulations and in biological samples using sulphonphthalein acid dyes

A simple, accurate and highly sensitive spectrophotometric methods are proposed for the rapid and accurate determination of amantadine HCl (AMD) using bromocressol green (BCG), bromophenol blue (BPB) and bromothymol blue (BTB). The developed methods involve formation of stable yellow colored chloroform extractable ion-associate complexes of the amino derivative (basic nitrogen) of the AMD with three sulphonphthalein acid dyes, namely; BCG, BPB and BTB, in acidic medium. The ion-associates exhibit absorption maxima at 415, 412 and 414 nm for BCG, BPB and BTB, respectively. AMD can be determined up to 1.5–16.5, 1.4–14.0 and 1.6–17 μg mL^?1, respectively. The effect of optimum conditions via acidity, reagent concentration, time, and solvent was studied. The stoichiometry of the reaction was found to be 1:1 in all cases. The low relative standard deviation values indicate good precision and high recovery values. These methods have been successfully applied for the assay of AMD in pharmaceutical formulations. Statistical comparison of the results with the reference method shows excellent agreement and indicates no significant difference in accuracy and precision.     

Transparent,flexible and low‐resistive precision fabric electrode for organic solar cells

We report the use of conducting precision fabrics as transparent and flexible electrode for organic semiconductor‐based thin film devices. Precision fabrics have well‐defined mesh openings, excellent flexibility and are fabricated by high‐throughput roll‐to‐roll manufacturing. Optimized fabrics reached light transmittance over 95% throughout the visible and near infrared spectra. A significant part of the transmitted light is scattered, which is particularly advantageous for solar cell applications. Surface resistivity is as low as ～3 Ohms/square, which decreases Ohmic losses when scaling up to large area devices. We demonstrate that solar cells fabricated onto these electrodes show very similar characteristics to those prepared on ITO. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Utility of oxidation–reduction reaction for the spectrophotometric determination of amlodipine besylate

A simple, rapid, accurate, precise and sensitive spectrophotometric method for the determination of amlodipine besylate (ADB) in bulk sample and in dosage forms is described. The method is based on oxidation of the drug by potassium permanganate in acidic medium and determine the unreacted oxidant by measuring the decrease in absorbance for five different dyes; methylene blue (MB), acid blue 74 (AB), acid red 73 (AR), amaranth dye (AM) and acid orange 7 (AO) at a suitable λ_max 663, 609, 511, 520, and 484 nm, respectively. Regression analysis of Beer's law plots showed good correlation in the concentration ranges 1.0–24, 0.9–22, 1.2–26, 0.9–12.8 and 1.0–14 μg ml^?1, respectively. The apparent molar absorptivity, Sandell sensitivity, detection and quantitation limits were calculated. For more accurate results, Ringbom optimum concentration ranges were 1.2–22.4, 1.1–20, 1.4–24.5, 1.0–12.3 and 1.3–13.2 μg ml^?1, respectively. Statistical treatment of the results reflects that the proposed procedures are precise, accurate and easily applicable for the determination of amlodipine besylate in pure form and in pharmaceutical preparations.     

Synthesis and Reactions of the Novel 6‐ethyl‐4‐hydroxy‐2,5‐dioxo‐5,6‐dihydro‐2H‐pyrano[3,2‐c]quinoline‐3‐carboxaldehyde

The novel 6‐ethyl‐4‐hydroxy‐2,5‐dioxo‐5,6‐dihydro‐2H‐pyrano[3,2‐c]quinoline‐3‐carboxaldehyde ( 2 ) was efficiently synthesized from Vilsmeier–Haack formylation of 3‐(1‐ethy1‐4‐hydroxy‐2‐oxo‐(1H)‐quinolin‐3‐yl)‐3‐oxopropanoic acid ( 1 ). The aldehyde 2 was allowed to react with some nitrogen nucleophiles producing a variety of hydrazones 3 – 7 . Reaction of aldehyde 2 with hydrazine hydrate and hydroxylamine hydrochloride afforded pyrazole and isoxazole annulated pyrano[3,2‐c]quinoline‐2,5(6H)‐dione, respectively. The reactivity of aldehyde 2 was examined toward some active methylene nitrile, namely, malononitrile, ethyl cyanoacetate, and cyanoacetamide leading to 2‐iminopyrano[2′,3′:4,5]pyrano[3,2‐c]quinolines 10 – 12 , respectively. Also, some novel pyrazolo[4″,3″:5′,6′]pyrano[2′,3′:4,5]pyrano[3,2‐c]quinolines ( 13 , 14 ) and thiazolo[5″,4″:5′,6′]pyrano[2′,3′:4,5]pyrano[3,2‐c]quinolines ( 15 , 16 ) were synthesized. Structures of the new synthesized products were deduced on the basis of their analytical and spectral data.     

Functionalized electrospun carbon nanofibers for removal of cationic dye

Electrospun carbon nanofibers (ECNFs) have attracted significant attention in recent years as relatively inexpensive alternative to carbon nanotubes for adsorption organic pollutants. In this study, ECNFs were fabricated from polyacrylonitrile (PAN) using an electrospinning technique, followed by carbonization and oxidation via treatment with a H₂SO₄/HNO₃ mixture. The prepared oxidized electrospun carbon nanofibers (O-ECNFs) were characterized using scanning and transmission electron microscopy (SEM and TEM), Fourier transform infrared (FT-IR), Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The O-ECNFs were used as nano-adsorbents for the adsorption of methylene blue (MB) from aqueous solution. The adsorption of MB by the O-ECNFs was studied as a function of pH, time, adsorbent dosage, MB concentration, and temperature. ECNF functionalization enhanced the adsorption capacity towards MB dye compared pristine ECNFs. Detailed analysis of the adsorption kinetics showed that the adsorption process followed a pseudo-second-order model. The adsorption isotherm was best fit by the Langmuir model. The thermodynamic results showed that MB adsorption onto the O-ECNFs was endothermic and spontaneous.