Proline‐based polymeric monoliths: Synthesis,characterization, and applications as organocatalysts in aldol reaction

Proline‐based polymer monoliths were synthesized via green protocol using lipase‐catalyzed esterification of methacrylic acid and 4‐hydroxyproline. Prolinyl methacrylate thus prepared was polymerized in situ as crosslinked monolith. The monolith was characterized by various techniques such as Fourier transform infrared, ¹H‐NMR, ¹³C‐NMR, scanning electron microscopy (SEM), X‐ray diffraction (XRD), and nitrogen analysis and used as catalyst in aldol reactions. The swelling behavior of the monolith was also studied as function of various external parameters like pH and temperature. The monoliths synthesized with 1% crosslinker was selected as candidate monolith for use as catalyst in aldol reaction, which was studied as a function of time, temperature, substrate structure, and amount of water:EtOH. The catalysts exhibited high efficiency in the cross aldol reaction, especially with the aromatic substrates having electron withdrawing substituent, and also good activity retention was observed when recycleability was studied up to five cycles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1007–1015, 2010     

Spectroscopic and spectrometric studies of anion recognition with calix[4]pyrroles in different reaction conditions

The binding studies of calix[4]pyrroles (1–6) with fluoro, chloro, bromo, iodo and sulphato anions generated from normal-tetrabutylammoniumfluoride, normal-tetrabutylammoniumchloride, normal-tetrabutylammoniumbromide, normal-tetrabutylammoniumiodide, and normal-tetrabutylammoniumsulphate respectively were investigated by electrospray ionization mass spectrometry (ESI-MS) in dichloromethane–acetonitrile in negative ion mode. The efficacy of a particular calix[4]pyrrole to bind with anions was found maximum at low cone voltage of the instrument, at high cone voltage the binding was suppressed due to removal of anion from the cavity of the macrocycles. The binding strength was found inversely proportional to the size of anion for a particular calix[4]pyrrole. The fragmentation pattern of calix[4]pyrrole was observed at higher cone voltage of ESI-MS and was interpreted. The association constants of calix[4]pyrroles and anions obtained from electronic transition studies were in good agreement with that observed from ¹H NMR titration studies.     

Synthesis, characterization and biological activity of ternary copper(II) complexes containing polypyridyl ligands

Ternary copper(II) complexes involving polypyridyl ligands in the coordination sphere of composition [Cu(tpy)(phen)](ClO4)2 (1), [Cu(tpy)(bipy)](ClO4)2 (2), [Cu(tptz)(phen)](ClO4)2 (3) and [Cu(tptz)(bipy)](BF4)2 (4) where tpy = 2,2':6',2'-terpyridine, tptz = 2,4,6-tri(2-pyridyl)-1,3,5-triazine, phen = 1,10-phenanthroline and bipy = 2,2'-bipyridine have been synthesized and characterized by elemental analysis, magnetic susceptibility, X-band e.p.r. spectroscopy and electronic spectroscopy. Single crystal X-ray of (1) has revealed the presence of a distorted square pyramidal geometry in the complex. Magnetic susceptibility measurements at room temperature were in the range of 1.77-1.81 BM. SOD and antimicrobial activities of these complexes were also measured. Crystal data of (1): P-1, a = 9.3010(7) A, b = 9.7900(6) A, c = 16.4620(6) A, Vc = 1342.73(14) A3, Z = 4. The bond distance of CuN in square base is 2+/-0.04 A.     

Lie symmetry analysis,optimal system,and generalized group invariant solutions of the (2 + 1)-dimensional Date–Jimbo–Kashiwara–Miwa equation

In this work, Lie group theoretic method is used to carry out the similarity reduction and solitary wave solutions of (2 + 1)-dimensional Date–Jimbo–Kashiwara–Miwa (DJKM) equation. The equation describes the propagation of nonlinear dispersive waves in inhomogeneous media. Under the invariance property of Lie groups, the infinitesimal generators for the governing equation have been obtained. Thereafter, commutator table, adjoint table, invariant functions, and one-dimensional optimal system of subalgebras are derived by using Lie point symmetries. The symmetry reductions and some group invariant solutions of the DJKM equation are obtained based on some subalgebras. The obtained solutions are new and more general than the rest while known results reported in the literature. In order to show the physical affirmation of the results, the obtained solutions are supplemented through numerical simulation. Thus, the solitary wave, doubly soliton, multi soliton, and dark soliton profiles of the solutions are traced to make this research physically meaningful.     

Study of Micellar Behavior of SDS and CTAB in Aqueous Media Containing Furosemide—A Cardiovascular Drug

Sound velocity and density measurements of aqueous solutions of the anionic surfactant SDS (sodium dodecyl sulfate) and the cationic surfactant CTAB (cetyltrimethylammonium bromide) with the drug furosemide (0.002 and 0.02 mol⋅dm⁻³) have been carried out in the temperature range 20–40 °C. From these measurements, the compressibility coefficient (β), apparent molar volume (φ _v ) and apparent molar compressibility (φ _κ ) have been computed. From electrical conductivity measurements, the critical micelle concentrations (CMCs) of SDS and CTAB has been determined in the above aqueous furosemide solutions. From the CMC values as a function of temperature, various thermodynamic parameters have been evaluated: the standard enthalpy change (DH_m^o\Delta H_{\mathrm{m}}^{\mathrm{o}}), standard entropy change (DS_m^o\Delta S_{\mathrm{m}}^{\mathrm{o}}), and standard Gibbs energy change (DG_m^o\Delta G_{\mathrm{m}}^{\mathrm{o}}) for micellization. This work also included viscosity studies of aqueous solutions of SDS and CTAB with the drug in order to determine the relative viscosity (η _r). UV-Vis studies have also been carried for the ternary drug/surfactant/water system having SDS in the concentration range 0.002–0.014 mol⋅dm⁻³. All of these parameters are discussed in terms of drug–drug, drug–solvent and drug–surfactant interactions resulting from of various electrostatic and hydrophobic interactions.     

Dielectric studies of molecular complexes ofDDT with some compounds of biological interest

The molecular complexation ofDDT (acceptor) with some compounds of biological interest as donors (e.g. indole, 2-methylindole, 3-methylindole, benzene and naphthalene) have been studied using refractive index,Guggenheim and dielectric titration plot methods. The interaction between these donors with solvents (CCl₄ and C₆H₆) have also been observed by calculating _ind through _ind=_sol–_inert. These data have shown that the molecular interaction between polar solutes and non-polar aromatics is governed by dipole-induced dipole electrostatic attraction. The dipole moment obtained due to charge transfer (_DA) has also been calculated and found that its value increases with the increase in the extent of interaction between donor and acceptor. These data support the charge-transfer complex formation hypothesis for the mode of action ofDDT on molecular level.

---

Dielektrizitäts-Untersuchungen an Molekülkomplexen von DDT mit einigen biologisch relevanten Verbindungen

Zusammenfassung Es wurden Molekülkomplexe vonDDT (als Acceptor) mit einigen Verbindungen von biologischem Interesse (als Donoren: Indol, 2-Methyl-indol, 3-Methyl-indol, Benzol und Naphthalin) mittels Brechungsindex,Guggenheim-Methode und dielektrischer Titration untersucht. Dipolmomentberechnungen ergaben, daß die intermolekulare Wechselwirkung von einer Anziehung induzierter Dipol-Dipol bestimmt wird; es wurde auch der charge-transfer-Anteil des Dipolmoments abgeschätzt. Alle diese Daten unterstützen die Annahme der charge-transfer-Komplexierung vonDDT.

     

The evaluation of a biogenetically based approach to the synthesis of octahydro-1h-benzofuro[3,2-e]isoquinolines

A potential synthetic route to octahydro-1$\text{H}$-benzofuro [3,2-e]isoquinoline derivatives by intermolecular oxidative phenolic coupling has been studied. A variety of successful coupling reactions have been effected between 2-naphthol or 4-t-butylphenol and p-cresol, 2-(p-hydroxyphenyl)ethanol, 3,4-dimethylphenol, 5-indanol and 6-hydroxytetralin, but 2-acetyl-7-hydroxytetrahydroisoquinoline failed to participate in such reactions.     

Polymers from renewable resources. II. A study in the radio chemical grafting of poly(styrene‐alt‐maleic anhydride) onto cellulose extracted from pine needles

A binary mixture of styrene and maleic anhydride has been graft copolymerized onto cellulose extracted from Pinus roxburghii needles. The reaction was initiated with gamma rays in air by the simultaneous irradiation method. Graft copolymerization was studied under optimum conditions of total dose of radiation, amount of water, and molar concentration previously worked out for grafting styrene onto cellulose. Percentage of total conversion (Pg), grafting efficiency (%), percentage of grafting (Pg), and rates of polymerization (R_p), grafting (R_g), and homopolymerization (R_h) have been determined as a function of maleic anhydride concentration. The high degree of kinetic regularity and the linear dependence of the rate of polymerization on maleic anhydride concentration, along with the low and nearly constant rate of homopolymerization suggest that the monomers first form a complexomer which then polymerizes to form grafted chains with an alternating sequence. Grafting parameters and reaction rates achieve maximum values when the molar ratio of styrene to maleic anhydride is 1 : 1. Further evidence for the alternating monomer sequence is obtained from quantitatively evaluating the composition of the grafted chains from the FT‐IR spectra, in which the ratio of anhydride absorbance to aromatic (CC) absorbance for the stretching bands assigned to the grafted monomers remained constant and independent of the feed ratio of maleic anhydride to styrene. Thermal behaviour of the graft copolymers revealed that all graft copolymers exhibit single stage decomposition with characteristic transitions at 161–165°C and 290–300°C. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1763–1769, 1999     

Efficient experimental designs when most treatments are unreplicated

In early generation variety trials, large numbers of new breeders’ lines (varieties) may be compared, with each having little seed available. A so-called unreplicated trial has each new variety on just one plot at a site, but includes several replicated control varieties, making up around 10% and 20% of the trial. The aim of the trial is to choose some (usually around one third) good performing new varieties to go on for further testing, rather than precise estimation of their mean yields.Now that spatial analyses of data from field experiments are becoming more common, there is interest in an efficient layout of an experiment given a proposed spatial analysis and an efficiency criterion. Common optimal design criteria values depend on the usual C-matrix, which is very large, and hence it is time consuming to calculate its inverse. Since most varieties are unreplicated, the variety incidence matrix has a simple form, and some matrix manipulations can dramatically reduce the computation needed. However, there are many designs to compare, and numerical optimisation lacks insight into good design features. Some possible design criteria are discussed, and approximations to their values considered. These allow the features of efficient layouts under spatial dependence to be given and compared.