Dyeing uric acid crystals with methylene blue

The growth of anhydrous uric acid (UA) and uric acid dihydrate (UAD) crystals from supersaturated aqueous solutions containing methylene blue, a cationic organic dye, has been investigated. Low concentrations of dye molecules were found to be included in both types of crystal matrixes during the growth process. Incorporation of dye into UA crystals occurs with high specificity, affecting primarily [001] and [201] growth sectors, while UAD crystals grown from solutions of similar dye concentration show inclusion but little specificity. The orientation of the UA-trapped species was determined from polarization data obtained from visible light microspectrometry. To achieve charge neutrality, a second anionic species must also be included with the methylene blue into UA and UAD crystal matrices. Under high pH conditions, crystallization of 1:1 stoichiometric mixtures of methylene blue and urate yields methylene blue hexahydrate (MBU.6(H2O). The crystal structure of MBU.6(H2O) reveals continuous pi-pi stacks of planes of dye cations and urate anions mediated by water molecules. This structure provides an optimal geometry for methylene blue-urate pairs and additional support for the incorporation of these dimers in uric acid single-crystal matrices. The strikingly different inclusion patterns in UA and UAD demonstrate that subtle changes in the crystal surfaces and/or growth dynamics can greatly affect recognition events.     

Platinum(II) 1,10-phenanthroline complexes of acetylides containing redox-active groups

The new diimine ligand 3,8-di-n-pentyl-4,7-di(phenylethynyl)-1,10-phenanthroline (1) was used for the synthesis of a range of Pt(II) complexes, viz.[Pt(1)Cl2], [Pt(1)(C triple bond C-Ph)2], [Pt(1)(C triple bond C-Fc)2] and [Pt(1)(C triple bond C-p-C6H4-C triple bond C-Fc)2](Fc = ferrocenyl). Crystal structure analyses were performed for [Pt(1)Cl2] and [Pt(1)(C triple bond C-Ph)2] and revealed that the di(acetylide)pi-tweezer of the latter binds a molecule of chloroform through C-H...pi hydrogen bonds. The redox and optical properties of 1 and its complexes were investigated by (spectro-)electrochemistry, UV-Vis and luminescence spectroscopy, and an energy level diagram was derived for [Pt(1)(C triple bond C-Fc)2] and related compounds on the basis of the data collected. The ferrocenyl-substituted Pt(II) complexes are donor-sensitiser assemblies. Intramolecular quenching of the photoexcited Pt(II) diimine unit leads to very short luminescence lifetimes for [Pt(1)(C triple bond C-p-C(6)H(4)-C triple bond C-Fc)2](2 ns) and [Pt(1)(C triple bond C-Fc)2](0.3 ns), as opposed to [Pt(1)(C triple bond C-Ph)2](0.7 micros). Excimer formation has been observed for [Pt(1)(C triple bond C-Ph)(2)] at room temperature in dichloromethane and at low temperatures in frozen glassy dichloromethane and 2-methyltetrahydrofuran solution, but not in the solid state.     

Electron energy-loss spectroscopy studies on C60 and C70 fullerite

The electronic structure of the crystalline fullerites C₆₀ and C₇₀ has been investigated by high-energy electron energy-loss spectroscopy in transmission. From valence band excitations and from core-level excitations of the C 1s level information on occupied and unoccupied and bands has been obtained.     

Growth and melting behaviour of thin in films on Ge(100)

Growth and melting behaviour of thin indium films on Ge(100) have been investigated by Auger-electron spectroscopy (AES), atomic force microscopy (AFM) and perturbed angular correlation (PAC) spectroscopy, respectively. At room temperature inidium is found to grow in three-dimensional islands even at submonolayer coverages. A very rough film surface is observed for thicknesses up to 230 ML. The melting behaviour of such films has been studied by PAC. A reduction of the melting temperature T _m as well as a strong supercooling of the films is observed. The electric field gradient for ¹¹¹In(¹¹¹Cd) in the indium islands is determined as a function of temperature and is used to monitor the local crystalline order of the films up to temperatures just below the melting point.     

Fulven-Dimere: Synthese,Strukturbeweis and thermisches Verhalten

Fulvene-Dieters: Synthesis, Structure Elucidation and Thermal Behaviour In contrast to earlier assumptions, thermal reaction of pure fulvene ( 1a ), 6-methylfulvene ( lb ) and 6, 6-dimethylfuivene ( 1c ) at 227deg; gives oligomeric mixtures consisting mainly of the endo-[4 + 2]-eycloaddition products 2a , 2b and 2c . Thermal reactivity of the fulvenes decreases strongly in the series 1a > 1b > 1c . While the dimers 2b and 2c equilibrate very easily in solution above room temperature with 1b and 1c , respectively, 2a equilibrates with the isomer 5a (? 1, 6-Dimethyliden3a α, 3bβ, 6a α, 6bβ-tetrahydro-1-H), 6 H-bi (cyclopentadienylen). This surprising rearrangement envolves a formal 1,3-shift of the 1, 2-dihydrofulvene-unit of 2a (s. Scheme 4).     

Stratospheric chemical ionization mass spectrometry: nitric acid detection by different ion molecule reaction schemes

Detailed height profiles of stratospheric nitric acid mixing ratios have been derived with a baloon borne chemical ionization mass spectrometer by applying several ion molecule reaction schemes, each associated to a specific and selective ion source. These ions (CO₃⁻, Cl_n⁻, CF₃O⁻, and CF₃O⁻H₂O) give rise to specific product ions (mainly CO₃⁻HNO₃, NO₃⁻HCl, NO₃⁻HF, and CF₃O⁻HNO₃) upon reaction with ambient nitric acid molecules. This paper reports on the instrumental details as well as on the results obtained during two balloon flights with the instrument. Within the accuracy of the measurements, the nitric acid height profiles obtained with the three different ion sources are in good agreement with one another as well as with literature data.     

Some aspects of tailoring flame retardancy in HET-acid-based flame retardants

HET acid was condensed with either ethylene glycol or 1,4-butanediol to yield the respective oligoesters. These oligoesters were characterized by molecular weight, measured by vapor-pressure osmometry. The degradation mechanism of oligoesters of HET acid with either ethylene glycol or 1,4-butanediol was elucidated. The thermal properties of these polyesters were studied using differential thermal analysis and thermal volatilization analysis. The mechanism of degradation was proposed on the basis of pyrolysis–gas chromatography studies, the degradation products being subsequently identified by mass spectrometry. It turned out that in the course of decomposition, hexachlorocyclopentadiene was formed, which is believed to be the active substance for flame retardance in these systems. The aspect of tailoring flame retardancy by changing the chemical environment, i.e., by using different diols, is discussed.     

The Structure of the Alkaloid Peduncularine. Communication no. 172 on organic natural products

The revised structure 1 is put forward for peduncularine, the main alkaloid of Aristotelia peduncularis (Labill.) HOOK. F. (Elaeocarpaceae), on the basis of its spectroscopic properties and those of its degradation products, the Hofmann base 3 and the hydrogenation product 4 . Structure 1 represents the relative configuration of the alkaloid. Peduncularine belongs to the class of indole alkaloids with a monoterpene unit as the aliphatic portion. To our knowledge it constitutes the first example in which an isopropyl group has become detached from the terpene unit and occurs as a substituent on nitrogen.     

Reverse micelles dissolved in supercritical xenon: an NMR spectroscopic study

Reverse micelles currently gain increasing interest in chemical technology. They also become important in biomolecular NMR due to their ability to host biomolecules such as proteins. In the present paper, a procedure for the preparation of high-pressure NMR samples containing reverse micelles dissolved in supercritical xenon is presented. These reverse micelles are formed by sodium bis(2-ethylhexyl) sulfosuccinate (AOT). For the first time, NMR spectroscopy could be applied to reverse micelles in supercritical xenon. The AOT/H(2)O/Xe system was studied as a function of experimental parameters such as xenon pressure, water content, and salt concentration. Optimum conditions for reverse micelle formation in supercritical xenon could be determined. It is, furthermore, demonstrated that biomolecules such as amino acids and proteins can be incorporated into the reverse micelles dissolved in supercritical xenon.