Direct optical emission spectroscopy of liquid analytes using an electrolyte as a cathode discharge source (ELCAD) integrated on a micro-fluidic chip

Atomic emission detection of metallic species in aqueous solutions has been performed using a miniaturised plasma created within a planar, glass micro-fluidic chip. Detection was achieved using an Electrolyte as a Cathode Discharge source (ELCAD) in which the sample solution itself is used as the cathode for the discharge. To realise the ELCAD technique within a micro-fluidic device, a parallel liquid-gas flow was set up in a micro-channel and a glow discharge ignited between the flowing liquid sample surface and a metal wire anode. The detection of copper and sodium was achieved, using atmospheric pressure air as a carrier gas, by observation of atomic emission lines of copper at 324 nm, 327 nm, 511 nm, 515 nm and 522 nm and an atomic emission line of sodium at 589 nm using a commercially available miniaturised spectrometer. A total electrical power of less than 70 mW was required to sustain the discharge. A semi-quantitative, absolute detection limit of 17 nmol s(-1) was obtained for sodium with a sample flow rate of 100 microL min(-1) and an integration time of 100 ms in air at atmospheric pressure. The volume required for such detection is approximately 170 nL. Further analysis was performed with an Echelle spectrometer using both argon and air as a carrier gas. The geometry and flow rates used demonstrate the feasibility of integrating such micro-plasmas into other micro-fluidic devices, such as miniaturised CE devices, as a method of detection. The potential for using such micro-plasmas within highly portable miniaturised systems and mu-TAS devices is presented and discussed.     

Determination of zearalenone and ochratoxin A in soil

Mycotoxins are secondary metabolites, formed by the action of fungi on agricultural crops in the field or during storage. These metabolites are highly toxic to animals and humans and high levels have been measured in agricultural crops. In order to evaluate human risks due to ingestion of mycotoxin-contaminated food different methods have been developed for analysis of mycotoxins in cereals and maize. In this project the focus was on mycotoxins in agricultural soil and the fate of these toxins in the soil-water-plant system. Two different mycotoxins were selected in the study: zearalenone (ZON) produced by species of Fusariumor Aspergillusand ochratoxin A (OTA) produced by species of Penicillium. We developed a method for analysis of these toxins in soil. Soil samples were extracted with methanol-water (9:1) and purified by solid-phase extraction (SPE, C8-columns). The final extract was analysed using high-pressure liquid chromatography (HPLC) with fluorescence detection. A Phenyl Hexyl column was used to separate the toxins. The detection limits obtained were 0.1 and 1.0 microg kg(-1) dry weight (dw) for OTA and ZON, respectively. The developed method has been used for analysis of different soils in connection with growth chamber experiments. The soil types used in the growth chamber experiments were a sandy soil, a sandy clay soil, and a soil with high content of organic matter. The recovery was determined as 85.8 and 93.4% and the repeatability to 5.1 and 12.8% for OTA and ZON, respectively. The reproducibility obtained was 8.5 and 15.0% for soil samples, representing concentration levels from 0.2-30 microg kg(-1) dw (OTA) and from 1.0-100 microg kg(-1) dw (ZON).     

Tuning the Properties of Copper(II) Complexes with Tetra‐ and Pentadentate Bispidine (=3,7‐Diazabicyclo[3.3.1]nonane) Ligands

The synthesis of a series of tetra‐ and pentadentate bispidine‐type ligands (bispidine=3,7‐diazabicyclo[3.3.1]nonane) – tetradentate ligands are donor‐substituted at C(2) and C(4), pentadentate ligands have an additional donor at N(3) or N(7), with pyridine, 2‐methylpyridine, or quinoline donor moieties – and of their Cu^II complexes are reported, together with single‐crystal structural analyses and solution studies (electrochemistry, electronic and EPR spectroscopy). Depending on the ligand geometry and on the co‐ligands (solvent or counter anion), there are various structural forms (pseudo‐Jahn–Teller elongation along all three molecular axes), and the structural data are correlated with the spectroscopic and electrochemical parameters.     

Substituted γ-lactones. Some observations on the synthesis and reactivity of 4-aroyl-3-hydroxy-2(5H)-furanones

The reaction pathway towards formation of 4-aroyl-3-hydroxy-2(5H)-furanones 1 from the base catalyzed reaction between an acetophenone, diethyl oxalate and formaldehyde was investigated. If methoxide was used as base, a transesterification was found to occur in the first step, while a side reaction, namely the retro Claisen reaction, was in competition with the desired lactone formation in the second step. The nature of the solvent and the acidic character of 1 as well as the basicity of the aminoarylene were found to have a profound influence on the course of the reaction of 1 with aminoarylenes.     

A Three-Dimensional Two-Phase Model for Thermal Plasma Chemical Vapor Deposition with Liquid Feedstock Injection

In this paper, a comprehensive model for thermal plasma chemical vapor deposition (TPCVD) with liquid feedstock injection is documented. The gas flow is assumed to be steady, of a single temperature. Radiation and charged species contributions are excluded, but extensive homogeneous and heterogeneous chemistry is included. The liquid phase is traced by considering individual droplets. Discussion on the model's application to diamond production from acetone in a hydrogen–argon plasma is included. The major conclusions are: (1) Liquid injection possesses a capability to deliver the hydrocarbon precursor directly onto the deposition target. (2) For the case of complete evaporation of the droplet before reaching the substrate, the deposition rate is similar to that obtained with gaseous precursors. (3) The computational results compare well with experimental data. The modeling results can be used to optimize the injection parameters with regard to the deposition rate.     

Kinetik und stereochemischer Verlauf der thermischen Umlagerung der vier stereoisomeren Propenyl-(but-2′-enyl)-äther

The gas-phase rearrangement of (1Z, 2′E)-, (1Z, 2′Z)-, (1E, 2′E)-, and (1E, 2′Z)- propenyl but-2′-enyl ether (Z, E)-, (Z, Z)-, (E, E)-, and (E, Z)-1) into erythro- and threo-2, 3-dimethyl-pent-4-en-al (erythro- and threo-2) was investigated over a temperature range from 142,5° to 190,0° at 20–35 Torr (for kinetic data and activation parameters see table 2). All four stereoisomeric ethers 1 rearrange preferentially via a chair-like transition state C into the aldehydes 2 (ΔΔG^≠ (160°) = 2,5–2,7 kcal/mol for B – C (B = boat-like transition state). The relative rates (k_rel) for (Z, Z)-1, (Z, E)-1, (E,Z)-1, and (E,E)-1 at 160° are 1,0, 2,9, 4,3 and 9,0 respectively (see table 5). Taking into account the relative enthalpies of the ethers 1 and the steric interaction in the C transition state of the ethers 1 (see table 6), k_rel values can be estimated. They are in good agreement with those observed (see table 5).