Influence of an 8-trifluoroacetyl group on flavanol couplings

The effect of an electron attracting substituent in the Lewis acid catalyzed oligomerization of flavanols was investigated. The results showed that the presence of a COCF₃, at the 8 position of a (+)-catechin unit strongly influenced the attack of the 6 free nucleophile flavanol position by the electrophile generated from a 4-O-alkyloxy protected catechin unit. This was observed either with TiCl₄ or TMSOTf as Lewis acids in which the carbon-carbon bond formation was inhibited and the corresponding dimer was detected in small amount. On the contrary, the formation of a carbon-oxygen bond was observed and the corresponding C-4→O→C-3 ether linked procyanidin dimer was isolated in a good yield. In order to avoid the participation of the C-3 hydroxyl group in the dimerization reaction, the two flavanol units were forced into C-4→C-8 coupling by use of an internal link. The structural elucidation of the isolated compounds was achieved through MS and NMR spectroscopy.     

Verfolgung von Phasenreaktionen in Flüssigkeiten

For a great number of processes of technical importance (separation precipitating, adsorption and chemical conversion) an indication of progress of reaction without any temporal delay and gap is required with regard to process optimation. Beside and in addition to thermal analyses and optical methods electrical methods can be used, which depend on measuring of those electric properties, which are connected with each change of phases of the material under test. By use of potentials of medium or high frequency the cell of reaction is free of test probes. This is especially favourable for investigations of such mixtures of phases, in which the surfaces of electrodes would be changed irreversible by sedimentation or separation of phase. In this way the following reactions were studied: precipitation processes in supersaturated aqueous solutions, solution of crystals of potassium chloride, adsorption of alkali solution by ground quartz, sedimentation of mineral substances, separation processes of the system phenol-water and transformation of high polymers.     

Organic synthesis on the microgram scale. V

Summary This paper describes a method for theg synthesis of flavone acetates in a sealed capillary tube. The reaction products are separated and purified on a thin-layer plate. The esters are then hydrolyzed on the plate and the parent flavones regenerated. A simple heating device is used which allows for observation of the reaction.

---

Zusammenfassung Beschreibung der Mikrogrammsynthese von Flavonacetaten in einem verschmolzenen Kapillarröhrchen. Die Reaktionsprodukte werden auf einer Dünnschichtplatte getrennt und gereinigt. Dann verseift man die Ester auf der Platte und stellt die freien Flavone dar. Ein einfaches Heizgerät ermöglicht die Beobachtung der Reaktion.

---

---

For part IV of this series see Mikrochim. Acta [Wien]1969, 352.     

Structure and properties of hydrophobically end-capped poly(ethylene oxide) solutions in the presence of monovalent and divalent cations

Hydrophobically modified poly(ethylene oxide), HMPEO, was studied in concentrated salt solutions. The influence of salts was compared to the effect of temperature on poly(ethylene oxide), PEO. As expected, the addition of monovalent cations (Na(+), K(+)) has the same effect as an increase in temperature in agreement with the thermodynamic properties of PEO: a decrease in solubility, micelle size, and viscosity was observed. Moreover, the intensity of neutron scattering peaks (characteristic of the semi-dilute solutions of these associative polymers) increases due to the collapse of PEO coronae in micelles. Very peculiar behavior was observed in the presence of divalent cations (Ca(2+), Mg(2+)): larger micelle aggregates and higher viscosities, relaxation times, and activation energies were observed by dynamic rheology. This behavior is attributed to interactions between divalent cations and oxygen in PEO backbones close to the micelle core, which may reinforce intermicellar bridges.     

Solution-phase preparation of a 560-compound library of individual pure mappicine analogues by fluorous mixture synthesis

Solution-phase mixture synthesis has efficiency advantages and favorable reaction kinetics. Applications of this technique, however, have been discouraged by the difficulty in obtaining individual, pure final products by using conventional separation and identification processes. Introduced here is a new strategy for mixture synthesis that addresses the separation and identification problems. Members of a series of organic substrates are paired with a series of fluorous tags of different chain lengths. The tagged starting materials are then mixed and taken through a multistep reaction process. Fluorous chromatography is used to demix the tagged product mixtures on the basis of the fluorine content of the tags to provide the individual pure components of the mixture, which are detagged to release the final products. The utility of fluorous mixture synthesis is demonstrated by the preparation of a 560-membered library of analogues of the natural product mappicine. A seven-component mixture is carried through a four-step mixture synthesis (two one-pot and two parallel steps) to incorporate two additional points of diversity onto the tetracyclic core. Methods for analysis and purification of the intermediates are established for the quality control of the mixture synthesis.     

Measuring intracellular calcium fluxes in high throughput mode

The measurement of intracellular calcium fluxes in real time is widely applied within the pharmaceutical industry to measure the activation of G-protein coupled receptors (GPCRhyp;s), either for pharmacological characterisation or to screen for new surrogate ligands. Initially restricted to G(q) coupled GPCRs, the introduction of promiscuous and chimeric G-proteins has further widened the application of these assays. The development of new calcium sensitive dyes and assays has provided sensitive, homogeneous assays which can be readily applied to high throughput screening (HTS). In this paper we describe the full automation of this assay type using a fluorometric imaging plate reader (FLIPR ) integrated into a Beckman/Sagian system to establish a simple robotic system that is well suited for the current medium throughput screening in this area of lead discovery. Using a recently completed HTS we discuss important determinants for FLIPR based screening, highlight some limitations of the current approach, and look at the requirements for future automated systems capable of keeping up with expanding compound files.     

Competitive Complexation of Lanthanide Cations by Xylitol and Nitrate Anion in Aqueous Solution: A Microcalorimetric Investigation

The apparent equilibrium constants and enthalpies of complexation of Nd³⁺, Sm³⁺, Eu³⁺, and Gd³⁺ by xylitol in aqueous solutions containing NaNO₃ at an ionic strength of 2.0 mol-kg^–1 have been determined by microcalorimetry at 25°C. Since nitrate anion weakly complexes the lanthanide cations, these values are analyzed in terms of competition between xylitol and NO ₃ ^- The method leads to the apparent equilibrium constants and enthalpies of complexation of the lanthanide cations by NO ₃ ^- at this particular ionic strength. Despite the difficulties encountered in characterizing rather weak associations, the results are, whenever comparison is possible, in good agreement with those obtained by direct microcalorimetry. The advantage of this competition method is that it can be used when the enthalpic effects are too weak and insufficiently concentration dependent for direct microcalorimetric determination. In the present case, it allows us to thermodynamically characterize the formation of SmNO ₃ ²⁺ and EuNO ₃ ²⁺ , processes we have not been able to study directly.     

Mechanical and physico-chemical characterization of cyclodextrin finished polyamide fibers

We present the study of the cyclodextrin (CDs) finishing of polyamide fibers (PA) by means of citric acid (CTR) as crosslinking agent. We observed that the mode of grafting happened by the formation of a crosslinked polymer formed between CTR and CDs. This polymer physically adhered to the fibers network and was resistant to hot water washings. Modified fibers were characterized by evaluating the contact angle with a polar liquid and by studying the hysteresis of damping of PA fibers (Cahn balance) with various grafting rates and by studying the absorptivity of grafted fabrics via the technique of the posed drop (Digidrop^® instrument). Then a mechanical characterization of the PA fabrics grafted with various proportions of CDs was accomplished, by traction and tear tests by using a tensile-test bench Lohmergy. Finally a topographic study of PA grafted surfaces was approached by atomic force microscopy (AFM and LFM; contact and non-contact mode) which permitted to evaluate the roughness and the chemical heterogeneity of the grafted surfaces.     

Probing the contribution of electronic coupling to the directionality of electron transfer in photosynthetic reaction centers

Subpicosecond transient absorption studies are reported for a set of Rhodobacter (R.) capsulatus bacterial photosynthetic reaction centers (RCs) designed to probe the origins of the unidirectionality of charge separation via one of two electron transport chains in the native pigment-protein complex. All of the RCs have been engineered to contain a heterodimeric primary electron donor (D) consisting of a bacteriochlorophyll (BChl) and a bacteriopheophytin (BPh). The BPh component of the M heterodimer (Mhd) or L heterodimer (Lhd) is introduced by substituting a Leu for His M200 or His L173, respectively. Previous work on primary charge separation in heterodimer mutants has not included the Lhd RC from R. capsulatus, which we report for the first time. The Lhd and Mhd RCs are used as controls against which we assess RCs that combine the heterodimer mutations with a second mutation (His substituted for Leu at M212) that results in replacement of the native L-side BPh acceptor with a BChl (beta). The transient absorption spectra reveal clear evidence for charge separation to the normally inactive M-side BPh acceptor (H(M)) in Lhd-beta RCs to form D+H(M)- with a yield of approximately 6%. This state also forms in Mhd-beta RCs but with about one-quarter the yield. In both RCs, deactivation to the ground state is the predominant pathway of D decay, as it is in the Mhd and Lhd single mutants. Analysis of the results indicates an upper limit ofV2L/V2m < or = 4 for the contribution of the electronic coupling elements to the relative rates of electron transfer to the L versus M sides of the wild-type RC. In comparison to the L/M rate ratio (kL/kM) approximately 30 for wild-type RCs, our findings indicate that electronic factors contribute approximately 35% at most to directionality with the other 65% deriving from energetic considerations, which includes differences in free energies, reorganization energies, and contributions of one- and two-step mechanisms on the two sides of the RC.     

Fragmentation of trimethoprim and other compounds containing alkoxy-phenyl groups in electrospray ionisation tandem mass spectrometry

This work describes electrospray ionisation tandem mass spectrometry studies of trimethoprim and a series of structurally similar compounds containing alkoxy-phenyl groups; using accurate mass measurement to confirm the proposed fragmentations. Radical cations were observed in the spectra obtained for some of the compounds, as well as uncommon fragmentations showing losses of CH4 and C2H6, whereas other compounds showed the formation of even electron ions. Possible structures for the fragment ions have been proposed and explanations for the different types of fragmentations based on the structures of the compounds. In addition an alternate structure for a fragment ion previously reported for tandem mass spectrometry of trimethoprim has been proposed, based on accurate mass measurement.