Sensitive Determination of 17β-Estradiol using a Magneto Sensor Based on Magnetic Molecularly Imprinted Polymer

The analysis of 17β-estradiol with high sensitivity and selectivity is extremely relevant to control the impacts that this compound can cause on health and the environment. Thus, we describe the development and application of a magneto carbon paste electrode based on magnetic molecularly imprinted polymer (MCPE-MMIP) for determination of 17β-estradiol. The analyte adsorbed on the MMIP was immobilized on the electrode surface by magnetic capture. The morphological and structural characterization of the obtained MMIP suggests that the material was effectively synthesized. MCPE-MMIP showed an improvement in the sensitivity for 17β-estradiol detection when compared to electrode configurations in the absence of this material. The optimum conditions (0.10 mol L⁻¹ phosphate buffer pH 7.0) were reached by differential pulse adsorptive stripping voltammetry (DPAdSV), in which the method presented linearity ranged from 0.06 to 175 μmol L⁻¹ with limits of detection and quantification of 0.02 and 0.06 μmol L⁻¹, respectively. The proposed sensor was applied effectively in the analysis of 17β-estradiol in river water and raw milk samples, exhibiting excellent recovery values (between 96.20 and 104 %), which were confirmed by HPLC analysis.     

Charge transport in anodic TiO2 nanotubes studied by terahertz spectroscopy

We report on the photoelectrochemical and terahertz measurements, of the charge transport properties of 1 μm thick self‐organized TiO₂ nanotube layers, prepared by the anodization of titanium. We provide evidence regarding the complexity of electron transport, and dynamics in the nanotubes. Shortly after photoexcitation, charge mobilites in amorphous and crystalline nanotubes are similar, but still lower compared to the bulk anatase. The mobility subsequently decreases due to trapping‐detrapping processes. The recombination rate in anatase nanotubes is much slower than in the amorphous ones, enabling the material to reach an internal photon to electron conversion efficiency exceeding 60%.     

Dynamic Formation of Hybrid Peptidic Capsules by Chiral Self‐Sorting and Self‐Assembly

Owing to their versatility and biocompatibility, peptide‐based self‐assembled structures constitute valuable targets for complex functional designs. It is now shown that artificial capsules based on β‐barrel binding motifs can be obtained by means of dynamic covalent chemistry (DCC) and self‐assembly. Short peptides (up to tetrapeptides) are reversibly attached to resorcinarene scaffolds. Peptidic capsules are thus selectively formed in either a heterochiral or a homochiral way by simultaneous and spontaneous processes, involving chiral sorting, tautomerization, diastereoselective induction of inherent chirality, and chiral self‐assembly. Self‐assembly is shown to direct the regioselectivity of reversible chemical reactions. It is also responsible for shifting the tautomeric equilibrium for one of the homochiral capsules. Two different tautomers (keto‐enamine hemisphere and enol‐imine hemisphere) are observed in this capsule, allowing the structure to adapt for self‐assembly.     

Silica–gelatin hybrids for tissue regeneration: inter-relationships between the process variables

Owing to their diverse range of highly tailorable material properties, inorganic/organic hybrids have the potential to meet the needs of biodegradable porous scaffolds across a range of tissue engineering applications. One such hybrid platform, the silica–gelatin sol–gel system, was examined and developed in this study. These hybrid scaffolds exhibit covalently linked interpenetrating networks of organic and inorganic components, which allows for independent control over their mechanical and degradation properties. A combination of the sol–gel foaming process and freeze drying was used to create an interconnected pore network. The synthesis and processing of the scaffolds has many variables that affect their structure and properties. The focus of this study was to develop a matrix tool that shows the inter-relationship between process variables by correlating the key hybrid material properties with the synthesis parameters that govern them. This was achieved by investigating the effect of the organic (gelatin) molecular weight and collating previously reported data. Control of molecular weight of the polymer is as an avenue that allows the modification of hybrid material properties without changing the surface chemistry of the material, which is a factor that governs the cell and tissue interaction with the scaffold. This presents a significant step forward in understanding the complete potential of the silica–gelatin hybrid system as a medical device.     

Tranexamic Acid Cream Protects Ultraviolet B-induced Photoaging in Balb/c Mice Skin by Increasing Mitochondrial Markers: Changes Lead to Improvement of Histological Appearance

Tranexamic acid (TSA) is widely used as an antiaging treatment for reducing melasma and wrinkles. There are various mechanisms for wrinkle formation, and one of them is due to damage of the mitochondria. Research on mitochondria in the skin is very limited, so we are interested to see the changes that occur after application of TSA cream. We explored the effect of TSA on mitochondrial protein levels (PGC1α, Tom20, COX IV), which had affected to skin histological structure. Thirty male, 6-week-old, Balb/C mice were divided into five groups (negative control, positive control, TSA 3%, TSA 4% and TSA 5%). After 10 days of acclimatization, four groups of mice were exposed to UVB light, of which three groups were given TSA cream for 10 weeks. The skin tissue was excised for protein and histological studies. H&E staining was performed for evaluating histological changes in epidermal thickness and dermal elastosis. TSA treatment on the mice skin increased mitochondrial marker levels and epidermal thickness while decreasing dermal elastosis for all the treatment groups. Topical application of TSA significantly increased mitochondrial biogenesis which may cause alteration in epidermal thickness and reduced dermal elastosis in the histology of mice skin.     

Discovery of Chemicals to Either Clear or Indicate Amyloid Aggregates by Targeting Memory‐Impairing Anti‐Parallel Aβ Dimers

Amyloid‐β (Aβ) oligomers are implicated in Alzheimer disease (AD). However, their unstable nature and heterogeneous state disrupts elucidation of their explicit role in AD progression, impeding the development of tools targeting soluble Aβ oligomers. Herein parallel and anti‐parallel variants of Aβ(1–40) dimers were designed and synthesized, and their pathogenic properties in AD models characterized. Anti‐parallel dimers induced cognitive impairments with increased amyloidogenesis and cytotoxicity, and this dimer was then used in a screening platform. Through screening, two FDA‐approved drugs, Oxytetracycline and Sunitinib, were identified to dissociate Aβ oligomers and plaques to monomers in 5XFAD transgenic mice. In addition, fluorescent Astrophloxine was shown to detect aggregated Aβ in brain tissue and cerebrospinal fluid samples of AD mice. This screening platform provides a stable and homogeneous environment for observing Aβ interactions with dimer‐specific molecules.     

Imaging the In Vivo Degradation of Tissue Engineering Implants by Use of Supramolecular Radiopaque Biomaterials

For in situ tissue engineering (TE) applications it is important that implant degradation proceeds in concord with neo‐tissue formation to avoid graft failure. It will therefore be valuable to have an imaging contrast agent (CA) available that can report on the degrading implant. For this purpose, a biodegradable radiopaque biomaterial is presented, modularly composed of a bisurea chain‐extended polycaprolactone (PCL2000‐U4U) elastomer and a novel iodinated bisurea‐modified CA additive (I‐U4U). Supramolecular hydrogen bonding interactions between the components ensure their intimate mixing. Porous implant TE‐grafts are prepared by simply electrospinning a solution containing PCL2000‐U4U and I‐U4U. Rats receive an aortic interposition graft, either composed of only PCL2000‐U4U (control) or of PCL2000‐U4U and I‐U4U (test). The grafts are explanted for analysis at three time points over a 1‐month period. Computed tomography imaging of the test group implants prior to explantation shows a decrease in iodide volume and density over time. Explant analysis also indicates scaffold degradation. (Immuno)histochemistry shows comparable cellular contents and a similar neo‐tissue formation process for test and control group, demonstrating that the CA does not have apparent adverse effects. A supramolecular approach to create solid radiopaque biomaterials can therefore be used to noninvasively monitor the biodegradation of synthetic implants.     

Third-order Nonlinear Optical Properties of Octa-substituted Metal-free Phthalocyanine Thin Films

Third-order nonlinear optical susceptibility, χ⁽³⁾ of symmetrically octa-substituted metal-free phthalocyanine thin films measured by the third-harmonic generation technique are reported. The metal-free phthalocyanine has been found to show a χ⁽³⁾ (−3ω; ω,ω, ω) value as large as 7.73×10⁻¹² esu at 1.80 μm. The figure of merit, χ⁽³⁾/α, was estimated to be 4.17×10¹⁷ esu cm at 1.05 μm and 6.97×10¹⁶ esu cm at 1.65 μm. Both linear and third-order optical properties of liquid-crystalline metal-free phthalocyanines are discussed