Target metabolic profiling analysis of free amino acids in plasma as EOC/TBDMS derivatives by GC-SIM-MS

Metabolic profiling analysis of free amino acids (AAs) in plasma (20 microL) was performed by gas chromatography-mass spectrometry in selected ion monitoring mode after ethoxycarbonyl/tert-butyldimethylsilyl derivatives. Characteristic fragment ions, including [M - 57](+) ions, permitted sensitive and selective detection of most of the AAs in the presence of co-extracted carboxylic acids, including free fatty acids, at much higher levels. The overall method was linear (r > or = 0.9991), reproducible (relative standard deviation = 2.3-8.8%) and accurate (relative error = -7.3-7.7%) with detection limits of 0.01-1.9 ng/mL. A total of 18 AAs, 15 protein AAs and three nonprotein AAs were quantitatively screened in a normal human plasma sample. This selective and simple method using a minimal sample volume was effective for the quantitation of plasma free AAs.     

Three-component velocity field measurements of propeller wake using a stereoscopic PIV technique

A stereoscopic PIV (Particle Image Velocimetry) technique was used to measure the three-dimensional flow structure of the turbulent wake behind a marine propeller with five blades. The out-of-plane velocity component was determined using two CCD cameras with an angular displacement configuration. Four hundred instantaneous velocity fields were measured for each of four different blade phases, and ensemble averaged in order to find the spatial evolution of the propeller wake in the region from the trailing edge up to one propeller diameter (D) downstream. The influence of propeller loading conditions on the wake structure was also investigated by measuring the velocity fields at three advance ratios (J=0.59, 0.72 and 0.88). The phase-averaged velocity fields revealed that a viscous wake formed by the boundary layers developed along the blade surfaces. Tip vortices were generated periodically and the slipstream contracted in the near-wake region. The out-of-plane velocity component and strain rate had large values at the locations of the tip and trailing vortices. As the flow moved downstream, the turbulence intensity, the strength of the tip vortices, and the magnitude of the out-of-plane velocity component at trailing vortices all decreased due to effects such as viscous dissipation, turbulence diffusion, and blade-to-blade interaction.     

Glasses-shaped triblock copolymer prepared by combination of atom transfer radical polymerization and ring opening polymerization

A glasses-shaped triblock copolymer of poly(ε-caprolactone)-b-polystyrene-b-poly(ε-caprolactone) (PCL-b-PS-b-PCL) is prepared by combining atom transfer radical polymerization (ATRP) and ring opening polymerization (ROP). Polystyrene (PS) star polymers are prepared via ATRP using a tetra-functional initiator, followed by azidation to yield azide end-functionalized star polymers. An alkyne-functionalized coupling agent, 2,2-bis[(2-propyn-1-yloxy)methyl]-1-propanol is employed to produce hydroxy 8-shaped PS via copper(I)-catalyzed alkyne-azide cycloaddition. Herein, hydroxy 8-shaped PS with high purity is obtained through preparative size exclusion chromatography (Prep SEC) and high-performance liquid chromatography, followed by the characterizations using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS), size exclusion chromatography (SEC), infrared, and proton nuclear magnetic resonance (¹H NMR) spectroscopy. The hydroxy groups of the 8-shaped PS are utilized as initiators for the ROP of ε-caprolactone to obtain linear chains attached to the 8-shaped architecture. After SEC fractionation, the glasses-shaped triblock copolymer is characterized using ¹H NMR and SEC. This unprecedented topology possesses two free chain-ends and two cycles; thus, both the properties of linear and cyclic polymers may be expected to be observed.     

Effect of working gases on thermal plasma waste treatment

An electric arc melter used for waste treatment processing is numerically studied. The effects of different plasma working gases are studied by using a laboratory scale test reactor. A two-dimensional finite difference approximation is used to solve the set of governing equations. The Navier-Stokes equations coupled with the combined Maxwell's equation for the electromagnetic fields is used to obtain the temperature and flow fields in the are melter. It is found that the energy efficiency of the air plasma is lower than that of an argon plasma. However, the melted soil volumes are larger using the air plasma than those using the argon plasma. The overall energy efficiency increases cis the gap between the cathode and the soil surface decreases. More uniform gas temperatures are found for the air plasma than that for the argon plasma. Result obtained from the laboratory-scale are melter is used as an input of the energy absorbed into the soil for the USBM arc melter simulation. Results show a maximum temperature of 2195 K at the center of the heat generation and a molten soil exit temperature of 1600 K.     

Emergence of self‐similar tree network organization

The self‐similar tree topology in open dissipative systems is formed as a result of self‐organization and found in various examples, such as river networks, blood vessels, vascular organizations in plants, and even lightning. It is generally assumed that the tree organization is a result of a dynamic process that minimizes the dissipation of energy. Here, we argue that inherent randomness is a sufficient condition for the generation of tree patterns under evolutionary dynamics and the decrease of energy expenditure is not the cause but a consequent signature. © 2008 Wiley Periodicals, Inc. Complexity, 13: 30–37, 2008     

Investigating sorption on iron-oxyhydroxide soil minerals by solid-state NMR spectroscopy: a 6Li MAS NMR study of adsorption and absorption on goethite

High-resolution 2H MAS NMR spectra can be obtained for nanocrystalline particles of goethite (alpha-FeOOH, particle size approximately 4-10 nm) at room temperature, facilitating NMR studies of sorption under environmentally relevant conditions. Li sorption was investigated as a function of pH, the system representing an ideal model system for NMR studies. 6Li resonances with large hyperfine shifts (approximately 145 ppm) were observed above the goethite point of zero charge, providing clear evidence for the presence of Li-O-Fe connectivities, and thus the formation of an inner sphere Li+ complex on the goethite surface. Even larger Li hyperfine shifts (289 ppm) were observed for Li+-exchanged goethite, which contains lithium ions in the tunnels of the goethite structure, confirming the Li assignment of the 145 ppm Li resonance to the surface sites.     

A new design strategy for dispersion stabilization of Ni particles based on the surface acid and base properties of Ni particles

A dispersion technology for Ni particles suspended in a non-aqueous medium based on the quantitative evaluation of surface acid-base properties of Ni particles is described. A quantitative analysis of surface acid-base properties of Ni particles was performed using non-aqueous titration. Dimethylamino ethanol and acetic acid were used as probe molecules to detect surface acid-base amounts of Ni particles. The dispersion system was designed on the basis of the amounts of surface acid-base sites on the Ni particle surface. Rheological behavior and agglomerate particle size data demonstrate that the dispersion stability of the designed Ni suspension is markedly improved, as expected. Therefore, the design strategy to improve the dispersion stability of Ni particles was successful. This strategy is expected to be applicable to dispersion systems of other particles suspended in a non-aqueous medium.     

Effect of nanoparticle sizes and number densities on the evaporation and dryout characteristics for strongly pinned nanofluid droplets

A microfabricated linear heater array operating in a constant voltage mode has been used to study the effect of nanoparticle size on the evaporation and dryout characteristics of strongly pinned nanofluid droplets. Four different nanofluids have been tested, containing 2-nm Au, 30-nm CuO, 11-nm Al2O3, and 47-nm Al2O3 nanoparticles, each of 5-muL droplets with 0.5 vol % in water. Nanofluid droplets show strong pinning along the droplet perimeter and, upon evaporation, leave a ring-shaped nanoparticle stain. Particle size is seen to have a clear and strong effect on the dryout stain pattern, while heater temperature seems to have little effect. With the assumption of axi-symmetry, tomographic deconvolution of measured data from the linear heater array allows for examination of the spatially and temporally resolved temperature and heat flux characteristics of the evaporating nanofluid droplets.