Mn掺杂Zn-In-S量子点的制备及发光性质研究

制备了Mn掺杂Zn-In-S量子点并研究了Zn/In的量比和反应温度对其发光性质的影响。在Mn掺杂的Zn-In-S量子点的发光谱中观测到一个600 nm发光带。通过改变Zn/In的量比,掺杂量子点的吸收带隙可从3.76 e V(330 nm)调谐到2.82 e V(440 nm),但600 nm发光峰的波长只有略微移动。这些掺杂量子点的最长荧光寿命为2.14 ms。当反应温度从200℃增加到230℃时,掺杂量子点的发光强度增加并达到最大值;而继续升高温度至260℃时,发光强度迅速减弱。此外,测量了Mn掺杂Zn-In-S量子点的变温发光光谱。发现随着温度的升高,发光峰位发生蓝移,发光强度明显下降。分析认为,Mn掺杂Zn-In-S量子点的600 nm发光来自于Mn2+离子的4T1和6A1之间的辐射复合。     

Microtextures Induced by Nanosecond Laser on Ni–Co Alloy Coatings

Ni–Co alloys have a wide range of applications in various fields owning to their excellent physical, chemical, and mechanical properties. In this paper, we prepare Ni–Co alloy coatings on 316L stain steel surfaces by electroplating. We present a novel approach utilizing a nanosecond laser to induce microtextures on Ni–Co alloy coatings. We study experimentally the effects of laser power and scanning rate on the surface morphologies of Ni–Co alloy coatings. The results indicate that the shape and size of induced microtextures can be controlled by the laser power and scanning rate. The size of grains increases with increase in the work current of the laser (WCL) at a certain scanning rate. With the WCL constant, the size of grains decreases with increase in scanning rate while their average height increases. It is a simple and easily-controlled method for the fabrication of microstructures on Ni–Co alloy coatings, which has promising applications in investigations of the properties of microtextured surfaces, such as friction, adhesion, and wetting.     

Nanospherical Surface‐Supported Seeded Growth of Au Nanowires: Investigation on a New Growth Mechanism and High‐Performance Hydrogen Peroxide Sensors

In this paper, a novel strategy with a new growth mechanism for fast and large‐scale growth of Au long nanowires on high‐curvature SiO₂ nanospherical surfaces has been developed. The synthesis includes three steps, i.e., amino modification of SiO₂ nanospheres, Au seed loading on aminated SiO₂ nanospheres and subsequently, Au seed‐mediated nanowire growth on SiO₂ nanospheres. The prepared Au nanowires (Au NWs) (exhibit long length, high aspect ratio, and good flexibility, and can naturally form the dense nanowire film, which is promising as a stable conductive electrode. In addition, the effect of synthetic conditions such as reactant feeding order, Au seeds and SiO₂@Au seeds on the morphology of Au nanostructures (nanowires, nanoteeth, and nanoflowers) has been investigated. It is found that Au seeds and high‐curvature SiO₂ nanospherical surfaces are necessary conditions for the successful preparation of Au NWs and nanowire films. The different growth mechanisms for Au NWs and nanoteeth have been proposed and discussed. Moreover, the novel nonenzymatic H₂O₂ sensor based on Au NWs exhibits much enhanced performance such as higher sensitivity, stability, and selectivity, wider linear range and lower detection limit, compared with that of Au nanoparticles‐based H₂O₂ sensor.     

Facile and surfactant-free synthesis of SnO<Subscript>2</Subscript>-graphene hybrids as high performance anode for lithium-ion batteries

A facile microwave-assisted ethylene glycol method is developed to synthesize the SnO₂ nanoparticles dispersed on or encapsulated in reduced graphene oxide (SnO₂-rGO) hybrids. The morphology, structure, and composition of SnO₂-rGO are investigated by scanning electron microscopy, transmission electron microscope, thermo-gravimetric analyzer, X-ray diffraction, Raman spectroscopy, and X-ray photoelectron spectroscopy. The electrochemical performance of SnO₂-rGO as anode materials for lithium-ion batteries was tested by cyclic voltammetry, galvanostatic charge–discharge cycling, and rate capability test. It is found that the SnO₂ nanoparticles with a uniform distribution have p-type doping effect with rGO nanosheets. The as-prepared SnO₂-rGO hybrids exhibit remarkable lithium storage capacity and cycling stability, and the possible mechanism involved is also discussed. Their capacity is 1222 mAhg^?1 in the first cycle and maintains at 700 mAhg^?1 after 100 cycles. This good performance can be mainly attributed to the unique nanostructure, good structure stability, more space for volume expansion of SnO₂, and mass transfer of Li⁺ during cycling.     

Site-Specific Detection of Free Radicals in Membranes Using an Amphiphilic Spin Trap

The detection of free radicals and related species has attracted considerable attention in recent years due to their critical roles in physiological and pathological processes. Among the various methods for the detection of free radicals, electron spin resonance coupled with spin-trapping technique has been an effective approach for the characterization and quantification of free radicals due to its high specificity. In this study, we designed and synthesized a novel amphiphilic spin trap, 2-(diethoxyphosphoryl)-2-heptadecanyl-3,4-dihydro-2H-pyrrole-1-oxide (DEPHdPO), from 5-(diethoxyphosphoryl)-5-methyl-1-pyrroline-N-oxide with a long hydrocarbon chain at the C-5 position of the pyrroline ring, providing the amphiphilic character. The free-radical-trapping ability of DEPHdPO was evaluated by capturing hydroxyl radicals (^·OH), superoxide anions (\( {\text{O}}_{2}^{ \cdot - } \)), and carbon-centered free radicals in a model membrane prepared from sodium dodecyl sulfate (SDS). The results indicate that the hydrophobic hydrocarbon chain of DEPHdPO can be inserted into the inner core of SDS micelles, and the hydrophilic nitronyl functional moiety is located on the surface layer. Thus, various free radicals, including ^·OH radicals, \( {\text{O}}_{2}^{ \cdot - } \) anions, and carbon-centered radicals could be site-specifically detected near the membrane surface. Moreover, DEPHdPO could be successfully located on the surface of thylakoid membranes, and the nearby photo-initiated \( {\text{O}}_{2}^{ \cdot - } \) anions could be trapped site-specifically.     

共享孔径人工电磁媒质设计及其在高增益低雷达散射截面天线中的应用

提出了一种具有部分反射特性和吸波特性的共享孔径人工电磁媒质(shared aperture metamaterial, SA-MTM).该媒质由上层斜十字金属图案加载集总电阻的吸波表面、下层开条带缝隙金属面的部分反射表面以及中间介质层构成, 吸波表面和部分反射表面在垂直维度上共享了一个物理孔径使该媒质同时实现了吸波特性和部分反射特性.将SA-MTM与天线一体化设计, 利用SA-MTM的部分反射表面和天线表面构成的法布里-珀罗(Fabry-Perot, F-P)谐振腔提升天线的增益, 利用SA-MTM的吸波表面吸收入射电磁波实现低雷达散射截面(radar section cross, RCS)天线的设计.仿真和实验结果表明, SA-MTM 的加载使天线的前向增益在5.57–5.94 GHz 的工作带宽范围内都提升了3 dB以上, 且天线的后向RCS在2–9 GHz范围内都有明显的减缩.该研究成果克服了天线辐射性能和散射性能无法兼顾的矛盾, 对高增益低RCS天线的设计具有重要的指导意义.     

风云三号C星全球导航卫星掩星探测仪首次实现北斗掩星探测

全球导航卫星掩星探测仪(GNOS)是国际首台北斗系统(BDS)和全球定位系统(GPS)双系统兼容掩星探测仪, 2013年9月23日随风云三号卫星C星(FY3 C)发射入轨, 目前已测得大量掩星数据. 介绍了FY3 C-GNOS的组成; 统计了2013年10月12日全天的FY3 C-GNOS掩星事件及其全球分布情况; 通过与GPS精密定轨结果进行对比分析, 测试了BDS在轨实时定位精度, 检验了BDS掩星产品的可靠性和一致性. 初步分析结果表明: 14颗BDS卫星在轨运营的条件下, BDS和GPS兼容掩星探测仪可将掩星事件数提高约33.3%; BDS实时定位平均偏差优于6 m, 标准偏差优于7 m; 5-25 km高度范围内, BDS与GPS内符合精度大气折射率优于2%, 温度优于2 K, 湿度优于1.5 g/kg, 压强优于2%, 电离层峰值密度优于15.6%. GNOS的在轨正常运行及BDS与GPS掩星定位精度及反演产品的一致性为北斗掩星探测的业务化运行奠定了基础.     

多峰场负氢离子源磁体布局对等离子体特性影响的数值模拟研究

负氢离子源的研究对于响应国家散裂中子源建设和国际热核聚变实验堆计划的开展都具有十分重要的意义. 由于离子源本身的物理特性导致数值模拟成为不可或缺的研究手段, 基于此, 首先对自主研发的全三维粒子模拟/蒙特卡罗碰撞算法进行阐述, 然后对负氢离子体积过程进行描述, 并在此基础上对中国原子能研究中心的多峰质子源进行了系统仿真, 在引出磁体极性相同和相反两种情形下, 分别对多峰质子源放电特性进行了讨论和分析. 结果显示: 在相反极性下, 两引出磁体附近的磁漂移方向相同且数值较大, 即磁漂移剧烈, 导致电子总数较大且高能电子在特定区域活跃, 进而负氢离子体积产率较高, 即负氢离子在空间呈现Y漂移; 反之, 在相同极性下, 电子约束效果相对较差且负氢离子体积产率较低, 但其空间分布均匀.     

溶胶凝胶自燃烧法合成金属与合金材料研究进展

本文综述了溶胶凝胶自燃烧法制备金属与合金材料的研究进展, 详细介绍了该方法的实验原理和技术路线, 通过实例介绍了该方法在制备金属和合金材料中的具体应用. 通过这一系列的工作介绍, 我们证实可以把传统的溶胶凝胶法制备氧化物材料的技术拓展到金属与合金材料的制备, 希望能够对材料研究的实验工作有所帮助.