Preparation and characterization of functional group gradient surfaces

Functional group gradient surfaces where the density of functional groups changes gradually along the sample length were prepared. The functional group (? COOH, ? CONH₂, and ? OH group) gradient surfaces were produced by the treatment of low-density PE sheets using a corona with gradually increasing power, followed by the graft copolymerization of acrylic acid and subsequent substitution reaction of carboxylic acid groups to amide or hydroxyl groups. The prepared gradient surfaces were characterized by the measurement of water contact angle, FTIR-ATR, and ESCA. The gradient surfaces prepared can be used to systematically investigate the interactions of biological or other species in terms of the surface functional groups and their density of polymeric materials. © 1994 John Wiley & Sons, Inc.     

Selective oxidation of hydrogen sulfide to ammonium thiosulfate and sulfur over vanadium-bismuth oxide catalysts

The selective oxidation of hydrogen sulfide containing excess water and ammonia was studied over vanadium-bismuth mixed oxide catalysts. The investigation was focused on understanding the complex reaction steps and the roles of each metal oxide. Therefore, supported V₂O₅/TiO₂, V-Bi-O/TiO₂ catalysts and a mechanical mixture of V₂O₅ + Bi₂O₃ were tested in the reaction. Ammonia reacted either with H₂S or SO₂, produced from the oxidation of H₂S. Water vapor promoted the reaction of ammonia and SO₂. Strong synergistic phenomena in catalytic activity were observed for the mechanically mixed catalyst of V₂O₅ and Bi₂O₃. V-Bi-O/TiO₂ catalyst showed very high H₂S conversion without any considerable emission of SO₂. Temperature-programmed studies (TPR and TPO), XRD and Raman analyses revealed that the high catalytic performance of V-BiO/TiO₂ catalyst originated from the high redox capacity of the bismuth vanadate phase.     

Quantitative analyses of shape-selective intercalation of isomeric mixtures of muconates into [LiAl2(OH)6]Cl.yH2O layered double hydroxide

Quantitative investigation of the shape selectivity for the competitive intercalation reaction of isomeric mixtures in the interlayer of LDH was achieved by analyzing the solid phases synthesized by the reaction of [LiAl(2)(OH)(6)]Cl.yH(2)O with various compositional mixtures of (E,E)- and (Z,Z)-muconates. The apparent partition constant K' for the anion-exchange reaction between (E,E)- and (Z,Z)-muconates was quite dependent on the mole fraction of muconates in solution. The only single phase saturated with [LiAl(2)(OH)(6)](2)[(E,E)-C(6)H(4)O(4)].zH(2)O could be obtained in the range of the initial mole fraction of (E,E)-muconate larger than 0.6 in the starting solution, while mixed phases intercalated with (E,E)- and (Z,Z)-muconates could be obtained at lower mole fractions of (E,E)-muconate. The shape selectivity for the competitive reaction of two muconates on the [LiAl(2)(OH)(6)](+) lattice could be ascribed to thermodynamic processes, and the conditions under which that pure (E,E)-muconate was efficiently separated from isomeric mixtures of two muconates were successfully evaluated.     

Reaction kinetics and critical phenomena: rates of some first order gas evolution reactions in binary solvents with a consolute point

We have measured the rate of carbon dioxide evolution in the aniline catalyzed decomposition of acetone dicarboxylic acid in a mixture of isobutyric acid + water near its consolute point. Within a temperature interval of 1 degrees C, which included the critical solution temperature, the first-order rate constant oscillated in magnitude by about 10% as it passed through three complete cycles of slowing down followed by speeding up. Whereas we can find no ready explanation for the speeding up, we suggest that, because the mixture contained no inert components, the slowing down should belong to the Griffiths-Wheeler class of strong critical effects [Phys. Rev. A 1970, 2, 1047]. As a check on this conclusion, we have measured the rate of the SN1 decomposition of benzene diazonium tetrafluoroborate in 2-butoxyethanol + water near the lower critical solution temperature and also the rate of the acid-catalyzed decomposition of ethyl diazoacetate in isobutyric acid + water near the upper critical solution temperature. Both of these reactions evolve nitrogen. In the first reaction, 2-butoxyethanol is inert, whereas in the second, isobutyric acid is inert. In both cases, because there was one inert component, we regarded the response of the rate constant to temperature in the critical region to be representative of the Griffiths-Wheeler class of weak critical effects. Within our accuracy of measurement of about 2% in the rate constant and about 1 mK in the temperature, we could detect no effect of the critical point on the rates of either of these reactions, suggesting that a weak effect may be too small to be seen with our experimental apparatus. The successful observation of a critical effect in the rate of decomposition of acetone dicarboxylic acid proves, however, that kinetic critical phenomena are observable in heterogeneous reactions.     

Modeling drop shape on contaminated surfaces or surfaces with physical structures

Surface contaminants are commonly found on films. They get transferred to the surface from incompletely cured silicone liners on the films or owing to migration of additives to the surface from within the film. During the process of ink jet printing (a noncontact printing process), surface contamination affects the shape of the drops (causing the formation of fingers and crescents) and hence image quality. This study uses modeling methods to examine how such surface contamination affects the drops shapes. Subsequently, it models the effect of surface structures (pits) on the drop shape. This study explores how image quality can be controlled in the presence of surface contamination and surface structures.     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

Generalized evaluation subgroups of product spaces relative to a factor

For any -complexes and , we show that . We use this fact to compute generalized evaluation subgroups of generalized tori relative to a sphere.

     

New hydrolysis method for extremely small amount of lipids and capillary gas chromatographic analysis as n(O)-tert.-butyldimethylsilyl fatty acid derivatives compared with methyl ester derivatives

The organic basic solution, 1 M tetramethylammonium hydroxide (TMAH) in methanol, was employed for the hydrolysis of extremely small amounts of lipids compared to the classical inorganic basic solution, 1 M KOH in ethanol. The hydrolysed fatty acids were derivatized as N(O)-tert.-butyldimethylsilyl (tBDMSi) esters with N-methyl-N-(tert.-butyldimethylsilyl) trifluoroacetamide (MTBSTFA) and compared with the classical derivatives, the methyl esters, made by the BF3-methanol method. Recoveries of fatty acids determined on the standard fatty acids and soybean oil hydrolysed with TMAH were high: about 1.1-2.1- and 2.0-5.4-times, respectively, in all fatty acids compared with the hydrolysis by KOH regardless of derivatization method. The relative standard deviations (RSDs) on the recoveries of standard fatty acids were less than 5% when hydrolysed with TMAH, regardless of derivatives, but when hydrolysed with KOH, RSDs were more than 5% for most fatty acids, especially for long-chain fatty acids. The RSDs on the recoveries of fatty acids on the soybean oil were also very high in the KOH hydrolysis. Fatty acid compositions of soybean oil were similar in the main fatty acids regardless of hydrolysis methods, but showed slightly different values, depending on the methods of derivatization. RSDs were also very high in the KOH hydrolysis. In view of these results, precision of analysis by KOH hydrolysis was very poor, so we could not rely on the data. On the other hand, the reliability of data by TMAH hydrolysis method was very high, so it is a useful new hydrolysis method for extremely small amounts of lipid samples. Both derivatives of 35 standard fatty acids were successfully separated on a HP-1 nonpolar capillary column. tBDMSi derivatives were completely resolved in 70 min by 295 degrees C. In the methyl ester derivatives it took about 80 min to get satisfying resolution, but these derivatives were completely resolved by 250 degrees C. The sensitivity of tBDMSi derivatives was about 1.5-6.3-times higher than that with methyl ester derivatives. The stability of tBDMSi derivatives was constant for about 144 h except arachidic, docosahexanoic, behenic and heneicosanoic acids, which were stable for only 86 h.     

Gas chromatographic study of the urinary codeine-to-morphine ratios in controlled codeine consumption and in mass screening for opiate drugs

The urinary codeine-to-morphine ratios in fifteen volunteers administered codeine tablets at intervals were studied by gas chromatography (GC) and compared with one month's GC results for enzyme multiplied immunoassay technique (EMIT)-screened urine specimens in a mass-screening programme for abuse of opiate drugs, particularly heroin. It appears that when M less than 2 and C/M greater than 0 or when M greater than 2 and C/M greater than 0.5, where C and M are codeine and morphine concentrations in micrograms per 10 ml of urine, codeine consumption has to be presumed.     

Study of hydantoin. III . Mass spectrometric behaviour in the electron impact of 2-imino-4-thiazolidinone derivatives

The mass spectral decomposition modes of a series of 2-imino-4-thiazolidinone derivatives are reported and discussed. The fragmentation patterns and mechanisms postulated have been confirmed by the analysis of the MIKE spectra and using DADI technique and the effects of heteroatoms and substituents on the MIKE spectrum of these compounds are compared with that of 3-substituted hydantoins.