Euler calculations with embedded Cartesian grids and small-perturbation boundary conditions

This study examines the use of stationary Cartesian mesh for steady and unsteady flow computations. The surface boundary conditions are imposed by reflected points. A cloud of nodes in the vicinity of the surface is used to get a weighted average of the flow properties via a gridless least-squares technique. If the displacement of the moving surface from the original position is typically small, a small-perturbation boundary condition method can be used. To ensure computational efficiency, multigrid solution is made via a framework of embedded grids for local grid refinement. Computations of airfoil wing and wing-body test cases show the practical usefulness of the embedded Cartesian grids with the small-perturbation boundary conditions approach.     

A Revisit on the Derivation of the Particular Solution for the Differential Operator ∆2 ± λ2

In this paper, we applied the polyharmonic splines as the basis functions to derive particular solutions for the differential operator ∆² ± λ². Similar to the derivation of fundamental solutions, it is non-trivial to derive particular solutions for higher order differential operators. In this paper, we provide a simple algebraic factorization approach to derive particular solutions for these types of differential operators in 2D and 3D. The main focus of this paper is its simplicity in the sense that minimal mathematical background is required for numerically solving higher order partial differential equations such as thin plate vibration. Three numerical examples in both 2D and 3D are given to validate particular solutions we derived.     

Theoretical investigation of Auger recombination on internal quantum efficiency of blue light-emitting diodes

The Auger recombination is recently proposed as one of the possible origins for the deteriorated internal quantum efficiency of InGaN light-emitting diodes. The Auger recombination behavior is quite different under widely varied Auger coefficients. The effect of Auger coefficient on the efficiency and output power is investigated numerically. The simulation results indicate that the Auger recombination with large Auger coefficient greatly decreases the efficiency in the whole current range under study. It is found that the electron current leakage and nonuniform hole distribution are the possible mechanisms responsible for the efficiency droop at high injection current.     

ATR-FTIR法比较米粉和若干种奶粉的成分含量

采用衰减全反射红外光谱(ATR-FTIR)法测定米粉和若干种奶粉的吸收光谱,通过计算峰面积的比值来比较所测样品中的脂肪、蛋白质和碳水化合物含量的不同。将此作为红外光谱开放式设计实验的教学内容,培养学生解决实际问题的综合能力和创新能力,收到了良好的教学效果。     

Nonspherical LED packaging lens for uniformity improvement

Light emitting diode (LED) has more advantages compared with a traditional incandescent light bulb and a fluorescent lamp, such as small size, low quantity of heat, long life, low power consumption, fast response, plain packaging and ease of develop ment of a frivolous short product. A methodology is proposed to improve the uniformity of the LED illumination system. As a light source in a backlight unit (BLU), the requirement for optical characteristics of a LED is different from highly directional conventional ones. New diffused-type LEDs need to be developed to fulfill the requirement of the BLU industry. A non-spherical lens is designed to optimize uniformity, and a great improvement in uniformity from 28.4 to 64% is demonstrated. In the future, it may used in an LED display to improve the unevenness of illumination.     

Nanostructured substrate with nanoparticles fabricated by femtosecond laser for surface-enhanced Raman scattering

A simple and fast method to fabricate nanostructured substrates with silver nanoparticles over a large area for surface-enhanced Raman scattering (SERS) is reported. The method involves two steps: (1) dip the substrate into a silver nitrate solution for a few minutes, remove the substrate from the solution, and then air dry and (2) process the silver nitrate coated substrate by femtosecond (fs) laser pulses in air. The second step can create silver nanoparticles distributed on the nanostructured surface of the substrate by the photoreduction of fs multiphoton effects. This study demonstrates that an enhancement factor (EF) greater than 5×10⁵, measured by 10⁻⁶ M Rhodamine 6G solution, can be achieved. The proposed technique can be used to integrate the SERS capability into a microchip for biomedical and chemical analysis.     

Diode-pumped passively Q-switched picosecond Nd:GDxY1-xVO4 self-stimulated raman laser

An efficiency of 8.2% is demonstrated for a diode-pumped passively Q-switched self-stimulated Raman laser with an a-cut mixed vanadate crystal, Nd:Gd0.8Y0.2VO4. At 2.2 W of incident pump power, the self-stimulated Raman laser produces pulses as short as 660 ps at a Stokes wavelength of 1175 nm with 2.7 microJ of energy per pulse at a 66-kHz repetition rate.     

Multiharmonic-generation biopsy of skin

Because it avoids the in-focus photodamage and phototoxicity problem of two-photon-fluorescence excitation, multiharmonic-generation biopsy based on a 1200-1300-nm light source could provide a truly noninvasive and highly penetrative optical sectioning of skin. We study multiharmonic-generation biopsy of fixed mouse skin. Our preliminary study suggests that this technique could provide submicrometer-resolution deep-tissue noninvasive biopsy images in skin without the use of fluorescence and exogenous markers.     

An investigation into EMI-induced noise in nanometer multi-quantum well InGaN LEDs

This study investigates the low-frequency noise induced by electromagnetic radiation interference (EMI) in a nanometer multi-quantum well InGaN LED (NMQLED). Theoretical models of the noise spectra and the EMI are constructed. In general, a good agreement is identified between the experimental and theoretical results. Both sets of results reveal that the magnitude of the EMI-induced noise is related to the pulse height, the output load, the parasitic capacitance, the interference frequency and the interference amplitude. It is shown that the harmonic noise increases with an increasing interference amplitude and frequency. The techniques presented in this study provide a systematic approach for obtaining the interference noise and signal-to-noise ratio (SNR) in LEDs and similar wavelength-based semiconductor devices.     

The influence of lanthanum doping on the physical and electrical properties of BTV ferroelectric thin films

In this study, the ferroelectricity of as-deposited Bi_3.9La_0.1Ti_2.9V_0.1O₁₂ (BLTV), Bi_3.9Ti_2.9V_0.1O₁₂ (BTV), and Bi₄Ti₃O₁₂ (BIT) thin films was prepared and compared by rf magnetron sputtering technology. For the BLTV, BTV, and BIT thin films deposited on Pt/Ti/SiO₂/Si and SiO₂/Si substrate, the physical and electrical characteristics of lanthanum doped BTV (BLTV) were better than those of BIT and BTV thin films. Regarding the physical properties, the micro-structure of as-deposited BTV and BLTV thin films were obtained and compared by XRD patterns and SEM images. The BLTV and BTV thin films were also exhibited clear the ferroelectricity. The remanent polarization (P _r ) of as-deposited BLTV thin films was 11 μC/cm² as the measured frequency of 100 kHz. It was higher than those of BTV thin films. Finally, the polarization of BLTV thin film capacitor decreased by 9%, while that of the BTV decreased by 15% after the fatigue test with 10⁹ switching cycles.