Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Electrochemical behavior of Li intercalation processes into a Li[NixLi(1/3−2x/3)Mn(2/3−x/3)]O2 cathode

Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂ (X=0.17, 0.25, 0.33, 0.5) compounds are prepared by a simple combustion method. The Rietvelt analysis shows that these compounds could be classified as having the α-NaFeO₂ structure. The initial charge-discharge and irreversible capacity increases with the decrease of x in Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂. Indeed, Li[Ni_0.50Mn_0.50]O₂ compound shows relatively low initial discharge capacity of 200 mAh/g and large capacity loss during cycling, with Li[Ni_0.17Li_0.22Mn_0.61]O₂ and Li[Ni_0.25Li_0.17Mn₀.₅₈]O₂ compounds exhibit high initial discharge capacity over 245 mAh/g and stable cycle performance in the voltage range of 4.8 -2.0 V. On the other hand, XANES analysis shows that the oxidation state of Ni ion reversibly changes between Ni²⁺ and about Ni³⁺, while the oxidation state of Mn ion sustains Mn⁴⁺ during charge-discharge process. This result does not agree with the previously reported ‘electrochemistry model’ of Li[Ni_xLi_(1/3−2x/3)Mn_(2/3−x/3)]O₂, in which Ni ion changes between Ni²⁺ and NI⁴⁺. Based on these results, we modified oxidation-state change of Mn and Ni ion during charge-discharge process.     

On the limit cycles of a quintic planar vector field

This paper concerns the number and distributions of limit cycles in a Z_2-equivariant quintic planar vector field.25 limit cycles are found in this special planar polynomial system and four different configurations of these limit cycles are also given by using the methods of the bifurcation theory and the qualitative analysis of the differential equation.It can be concluded that H(5)≥25=5~2, where H(5)is the Hilbert number for quintic polynomial systems.The results obtained are useful to study the weakened 16th Hilbert problem.     

聚能射流的断裂时间

从描述聚能射流失稳的一维近似方程出发，导出了聚能射流断裂时间的近似公式。这个近似公式定量显示了屈服应力、本构关系、粘度和径向收缩效应等对射流断裂时间的影响，在４个不同的特殊近似下，可以自然演化为近１０年来所发表的几个半经验解析公式，并且在合理的参数范围内，公式给出的断裂时间曲线覆盖了射流断裂时间的全部实验点。     

OnM-ideals and best approximation

In this paper we will prove some theorems on theM-ideals of compact operators and the best approximation of quasitriangular operator algebras. These results improve and extend the known results in [4, 5, 7].This work is supported in part by the National Natural Science Foundation of China.     

A molecular network model to describe the nonlinear viscoelastic behavior of polymers

A transient molecular network model is built to describe the nonlinear viscoelasticity of polymers by considering the effect of entanglement loss and regeneration on the relaxation of molecular strands. It is an extension of previous network theories. The experimental data on three thermoplastic polymers (ABS, PVC and PA6) obtained under various loading conditions are used to test the model. Agreement between the theoretical and experimental curves shows that the suggested model can describe successfully the relaxation behavior of the thermoplastic polymers under different loading rates by using relatively few relaxation modes. Thus the micromechanism responsible for strain-rate dependence of relaxation process and the origin of nonlinear viscoelasticity may be disclosed. The project supported by the National Natural Science Foundation of China and Doctorial Fund     

Activity coefficients for NaBr in aqueous ternary solutions with sodium propionate and butyrate from EMF measurements

The activity coefficients of NaBr in the NaBr–NaPropionate–H₂O and NaBr–NaButyrate–H₂O systems were determined from EMF measurements at constant total ionic strength of 0.1 0.5 1.0 1.5 2.0 and 2.5 mol-kg^–1 and at 25° C. The activity coefficients were fitted using Scatchard, Pitzer and Lim equations. Finally the excess Gibbs free energy of these mixtures were also calculated.     

A posteriori error analysis for linearization of nonlinear elliptic problems and their discretizations

The paper is devoted to a posteriori quantitative analysis for errors caused by linearization of non-linear elliptic boundary value problems and their finite element realizations. We employ duality theory in convex analysis to derive computable bounds on the difference between the solution of a non-linear problem and the solution of the linearized problem, by using the solution of the linearized problem only. We also derive computable bounds on differences between finite element solutions of the nonlinear problem and finite element solutions of the linearized problem, by using finite element solutions of the linearized problem only. Numerical experiments show that our a posteriori error bounds are efficient.     

微腔激光器的发展与应用

本文探讨了微腔激光器的分类、基本原理及特点，并简单介绍了目前几种微型激光器的发展及应用。