Study of interactions of various ionic species with solvents toward the design of receptors

In earlier studies, the interactions of isolated ionic species with various solvents were investigated using ab initio calculations. The ionic species investigated included cations (proton, hydronium, ammonium, and metal cations) and anions (single electron, hydroxide, and halide anions). However in the present study, we investigate the interactions of these ionic species with the solvent in the presence of other competing ionic species. We also elaborate on how the information obtained from these extensive studies have been employed in designing and synthesizing various kinds of novel ionophores and receptors.     

In‐line monitoring of UV photopolymerization with a quartz crystal resonator

An in‐line monitoring device using a quartz crystal resonator for thin film polymerization was proposed, and its performance has been evaluated by implementing in the UV polymerization of 2‐hydroxyethyl methacrylate with a photoinitiator of 1‐chloroanthraquinone. Because the variation of resonant resistance of the resonator is proportional to the square root of viscosity change that is closely related to the polymerization degree, the resistance can be used as a measure of the polymerization degree. The resistance measurements were compared with the outcome of instrumental analyses of polymerization degree using an FTIR spectrometer and a gel permeation chromatograph. The experimental results showed that the resistance measurements were consistent with the experimental outcome of the instrumental analyses, and this indicates the effectiveness of the proposed device. Owing to the simplicity and availability of the resonator system, its wide utilization in the monitoring of a variety of film polymerization processes, including photoresistor application, is expected. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2428–2439, 2006     

Synthesis and properties of noncoplanar rigid‐rod aromatic polyhydrazides and poly(1,3,4‐oxadiazole)s containing phenyl or naphthyl substituents

Two new phenyl‐ and naphthyl‐substituted rigid‐rod aromatic dicarboxylic acid monomers, 2,2′‐diphenylbiphenyl‐4,4′‐dicarboxylic acid ( 4 ) and 2,2′‐di(1‐naphthyl)biphenyl‐4,4′‐dicarboxylic acid ( 5 ), were synthesized by the Suzuki coupling reaction of 2,2′‐diiodobiphenyl‐4,4′‐dicarboxylic acid dimethyl ester with benzeneboronic acid and naphthaleneboronic acid, respectively, followed by alkaline hydrolysis of the ester groups. Four new polyhydrazides were prepared from the dicarboxylic acids 4 and 5 with terephthalic dihydrazide (TPH) and isophthalic dihydrazide (IPH), respectively, via the Yamazaki phosphorylation reaction. These polyhydrazides were amorphous and readily soluble in many organic solvents. Differential scanning calorimetry (DSC) indicated that these hydrazide polymers had glass transition temperatures in the range of 187–234 °C and could be thermally cyclodehydrated into the corresponding oxadiazole polymers in the range of 300–400 °C. The resulting poly(1,3,4‐oxadiazole)s exhibited T_g's in the range of 252–283 °C, 10% weight‐loss temperature in excess of 470 °C, and char yield at 800 °C in nitrogen higher than 54%. These organo‐soluble polyhydrazides and poly(1,3,4‐oxadiazole)s exhibited UV–Vis absorption maximum at 262–296 and 264–342 nm in NMP solution, and their photoluminescence spectra showed maximum bands around 414–445 and 404–453 nm, respectively, with quantum yield up to 38%. The electron‐transporting properties were examined by electrochemical methods. Cyclic voltammograms of the poly(1,3,4‐oxadiazole) films cast onto an indium‐tin oxide (ITO)‐coated glass substrate exhibited reversible reduction redox with E_onset at ?1.37 to ?1.57 V versus Ag/AgCl in dry N,N‐dimethylformamide solution. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6466–6483, 2006     

Measurement and prediction of solubilities and diffusion coefficients of carbon dioxide in starch–water mixtures at elevated pressures

The solubility and diffusion coefficient of carbon dioxide in intermediate‐moisture starch–water mixtures were determined both experimentally and theoretically at elevated pressures up to 16 MPa at 50 °C. A high‐pressure decay sorption system was assembled to measure the equilibrium CO₂ mass uptake by the starch–water system. The experimentally measured solubilities accounted for the estimated swollen volume by Sanchez–Lacombe equation of state (S‐L EOS) were found to increase almost linearly with pressure, yielding 4.0 g CO₂/g starch–water system at 16 MPa. Moreover, CO₂ solubilities above 5 MPa displayed a solubility increase, which was not contributed by the water fraction in the starch–water mixture. The solubilities, however, showed no dependence on the degree of gelatinization (DG) of starch. The diffusion coefficient of CO₂ was found to increase with concentration of dissolved CO₂, which is pressure‐dependent, and decrease with increasing DG in the range of 50–100%. A free‐volume‐based diffusion model proposed by Areerat was employed to predict the CO₂ diffusivity in terms of pressure, temperature, and the concentration of dissolved CO₂. S‐L EOS was once more used to determine the specific free volume of the mixture system. The predicted diffusion coefficients showed to correlate well with the measured values for all starch–water mixtures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 607–621, 2006     

Local chemical distribution and electronic structure of Ge1−xTx DMS single crystals (T=Cr,Mn, Fe)

The spatial concentration distribution and local electronic structure of ferromagnetic Ge_1−xT_x (T=Cr, Mn, Fe) DMS single crystals have been investigated by using scanning photoelectron microscopy (SPEM), X-ray absorption spectroscopy (XAS), and photoemission spectroscopy (PES). It is found that doped T ions in Ge_1−xT_x crystals are chemically phase-separated, suggesting that the observed ferromagnetism arises from the phase-separated T-rich phases in Ge_1−xT_x.     

Stability of transonic shocks in supersonic flow past a wedge

In this paper we study the stability of transonic shocks in steady supersonic flow past a wedge. We take the potential flow equation as the mathematical model to describe the compressible flow. It is known that in generic case such a problem admits two possible location of shock, connecting the flow ahead it and behind it. They can be distinguished as supersonic-supersonic shock and supersonic-subsonic shock (or transonic shock). Both these possible shocks satisfy the Rankine-Hugoniot conditions and entropy condition. In this paper we prove that the transonic shock is also stable under perturbation of the coming flow provided the pressure at infinity is well controlled.     

湍流燃烧二阶矩模型的大涡模拟验证

对美国Sandia国家实验室测量的甲烷-空气湍流射流火焰进行了三维大涡模拟(LES),其统计的时均量以及脉动量符合实验测量值,且和RANS代数二阶矩湍流燃烧模型模拟结果大致符合。LES统计得到的化学反应率系数脉动和甲烷浓度脉动的互关联与对应的时均量梯度的乘积分布趋势相同,大小幅值的位置也相对应,与二阶矩湍流燃烧模型的封闭假设相符,验证了二阶矩代数燃烧模型的合理性。     

Investigation on the barrier height and inhomogeneity of nickel silicide Schottky

The apparent Schottky barrier height (SBH) of the nickel silicide Schottky contacts annealed at different temperatures was investigated based on temperature dependence of I-V characteristic. Thermionic emission-diffusion (TED) theory, single Gaussian and double Gaussian models were employed to fit I-V experimental data. It is found the single Gaussian and double Gaussian SB distribution model can give a very good fit to the I-V characteristic of apparent SBH for different annealing temperatures. Also, the apparent SBH and the leakage current increase with annealing temperatures under reverse voltage. In addition, the homogeneity of interfaces for the samples annealed at temperatures of 500 and 600 °C is much better than that of the samples annealed at temperatures of 400, 700, and 800 °C. This may result from the phase transformation of nickel silicide due to the different annealing temperatures and from the low Schottky barrier (SB) patches.     

MnBiDy(Sm)永磁膜的结构和磁性

报道了采用真空蒸镀的方法制备的MnBiDy(Sm)永磁膜的结构和磁性.Mn:Bi:Dy(Sm)的投料比为2:1:0.10.薄膜经过退出处理(350—425℃,保温4h)后,具有NiAs型hcp结构,C轴垂直膜面,剩余磁感应强度B=3.4-6.5kG,内禀矫顽力_MH_c≈3-8kOe,最大磁能积(BH)_(max)=13.39MG·Oe.实验发现,薄膜厚度对MnBiDy(Sm)永磁膜的结构和磁性具有很大的影响. 关键词：