Patterned and controlled polyelectrolyte fractal growth and aggregations

Two-dimensional patterned and controlled polyelectrolyte aggregations (e.g., tree-like ramified structures) created by microcontact printing have been demonstrated and discussed. Polyelectrolyte-micropatterned aggregations on surfaces were controlled by the micropattern size and shape of PDMS stamps. The formation of aggregates was dependent on the ink and surface conditions, and the aggregates consisted of two distinct layers; strongly adsorbed, primary uniform layers and weakly adsorbed, secondary aggregation layers positioned on top of the primary layers. The adsorption of the primary layers was strong enough not to be washed away, while the aggregated secondary layers were easily removed by washing. The aggregation of secondary layers showed typical tree-like ramified structures of fractal growth and aggregation. Directional and confined stamping led to directing and confining the growth of the fractal polyelectrolyte clusters, respectively. The micropatterned primary uniform layers were not removed by extensive washing, and they were identified by selective nickel plating and charged particle selective adsorption in which the surface formed positive and negative micropatterns. These functional and patterned surfaces have great potentials for advanced devices and sensors.     

Expedient Diels-Alder assembly of 4-aryl-4-phenylsulfonyl cyclohexanones

The efficient preparation of 4-aryl-4-phenylsulfonyl cyclohexanones, containing a quaternary sulfone-bearing carbon centre, is described. Their synthesis proceeds in 38-78% overall yield by way of three steps: (i) sulfinate alkylation; (ii) methylenation; and (iii) regioselective Diels-Alder condensation with 2-trimethylsiloxybutadiene. The scope and limitations of the one-pot Mannich-type methylenation described were examined.     

尼龙66/蒙脱土复合材料结晶行为的研究

在密炼机中采用熔融共混法制备蒙脱土重量分数为 2 5 %、4 5 %的尼龙 6 6 /蒙脱土复合材料 .通过DSC法对非等温结晶行为及在 2 2 8～ 2 4 0℃范围内的等温结晶行为进行研究 ,并与纯尼龙 6 6进行比较 .从其等温和非等温结晶行为的研究表明 ,蒙脱土起成核剂的作用 ,它的填入使尼龙 6 6结晶速率提高 ,但填料与基体间的相互作用使其链段运动困难 ,结晶活化能提高 ;在研究的填料含量变化范围内 ,结晶行为变化不大 ,并且找到该复合材料在 2 2 8～ 2 34℃范围结晶对温度的不敏感区 ;对非等温结晶过程分析 ,刘结平 莫志深方程是适用的 ,而Ozawa方程则是不适用的 .     

交联聚苯乙烯-丁二烯-苯乙烯双极膜的制备及其在电合成环氧丁二酸中的应用

以聚苯乙烯-丁二烯-苯乙烯（SBS）嵌段共聚物作为基膜材料,采用自由基接枝聚合反应,在SBS主链上引入丙烯酸（AA）、苯乙烯磺酸和γ-甲基丙烯酰氧基丙基三甲氧基硅烷（KH570）链段作为阳离子交换膜;引入丙烯酸二甲基胺基乙酯和KH570链段作阴离子交换膜,阴、阳离子交换膜经KH570结构中三甲氧基硅烷基团的水解缩合,得到含硅氧交联网的SBS接枝离子交换膜,用流延法制备了SBS双极膜。 测得SBS阴膜和阳膜的吸水率分别为63.9%和72.8%,SBS阴膜和阳膜的离子交换容量分别为1.51和2.71 mmol/g。 将SBS双极膜作为阴阳两室隔膜,采用钨酸钠/过钨酸钠体系由阴极间接电氧化合成了环氧丁二酸。 结果表明,以石墨为阴、阳电极,电流密度为2.0×10-2 A/cm²、50 ℃反应4 h,环氧丁二酸的产率为53.0%,电流效率为40.8%。     

在镉盐胁迫下扇贝鳃组织应激蛋白的研究

采用透射电子显微镜观察了虾夷盘扇贝(Patinopecten yessoensis)鳃组织细胞的超微结构, 发现镉盐能胁迫鳃组织中的腮丝、细胞核和线粒体产生病变. 利用双向凝胶电泳(2D-PAGE)优化分离扇贝鳃组织的全蛋白, 获得约800个蛋白质斑点, 并筛选出37个由于镉盐胁迫而产生的差异蛋白质斑点. 选用基质辅助激光解吸离子化-飞行时间质谱(MALDI-TOF MS)技术和数据库检索鉴定差异蛋白, 结果发现7个与镉毒性密切相关的蛋白质, 即热休克蛋白70和β-淀粉酶等上调蛋白质及原肌球蛋白、肌动蛋白和钙活化核苷酸酶1等下调蛋白质. 此外, 还发现转录调节子Crp/Fnr家族为低表达蛋白质, 而ABC转运子为高表达蛋白质. 在这些差异蛋白中, 部分蛋白质适合作为连续监测流动海水中镉污染程度及评价其危害性的蛋白指示物.     

Dual functional polyelectrolyte multilayer coatings for implants: permanent microbicidal base with controlled release of therapeutic agents

Here we present a new bifunctional layer-by-layer (LbL) construct made by combining a permanent microbicidal polyelectrolyte multilayered (PEM) base film with a hydrolytically degradable PEM top film that offers controlled and localized delivery of therapeutics. Two degradable film architectures are presented: (1) bolus release of an antibiotic (gentamicin) to eradicate initial infection at the implant site, or (2) sustained delivery of an anti-inflammatory drug (diclofenac) to cope with inflammation at the site of implantation due to tissue injury. Each degradable film was built on top of a permanent base film that imparts the implantable device surface with microbicidal functionality that prevents the formation of biofilms. Controlled-delivery of gentamicin was demonstrated over hours and that of diclofenac over days. Both drugs retained their efficacy upon release. The permanent microbicidal base film was biocompatible with A549 epithelial cancer cells and MC3T3-E1 osteoprogenitor cells, while also preventing bacteria attachment from turbid media for the entire duration of the two weeks studied. The microbicidal base film retains its functionality after the biodegradable films have completely degraded. The versatility of these PEM films and their ability to prevent biofilm formation make them attractive as coatings for implantable devices.     

低碳钢大气腐蚀室内模拟加速腐蚀试验与锈蚀规律

建立实验室模拟大气腐蚀的干湿循环加速腐蚀方法.提出低碳钢锈蚀的分段演化规律,演化规律对应于锈层致密度转折和锈层结晶组分的形成,显示分段规律的合理性.实验室获得的低碳钢锈蚀演化规律与其在万宁和沈阳两个大气站现场曝晒的最新结果有相关性,证明加速腐蚀方法的可靠性.     

应用GC-MS/MS技术检测水果蔬菜中22种残留农药

目前,水果蔬菜生产中存在严重的滥施农药情况.水果蔬菜中常含有多种类型的残留农药,品种复杂多样.     

松香改性酚醛环氧树脂的合成与表征

以松香,环氧氯丙烷,甲醛及苯酚等为主要原料,合成了一种新型的环氧树脂。通过正交实验法确定了环氧化反应的最佳实验条件,即环氧化温度90℃,碱用量13 g,催化剂为cat 1,其最佳用量为0.018 mol,环氧氯丙烷的用量为50 g,碱浓度为30%(以上数值均以松香用量为70 g时计)。在最佳实验条件下合成得到了松香改性酚醛环氧树脂(简称RAPE),并用HPLC、FT-IR、NMR对其进行结构表征。结果表明,得到的RAPE其环氧值为0.28 mol/100g,平均聚合度约为3.4,酚羟基和树脂酸上的羧基基本反应完全,得到一种新型的缩水甘油醚型和缩水甘油酯型的环氧树脂。