Rational synthesis of Pt spheres with hollow interior and nanosponge shell using silica particles as template

Here we report a facile and efficient method to prepare Pt spheres with hollow interior and nanosponge shell with high surface area. Such a unique Pt nanostructure can effectively improve the electrocatalytic performance of Pt catalysts by facilitating the access of electroactive species to the full-extent Pt surface.     

Removal of malachite green from dye wastewater using mesoporous carbon adsorbent

Mesoporous carbon was synthesized for the removal of a cationic dye malachite green (MG) from aqueous solution. The studies were carried out under various experimental conditions such as contact time, dye concentration, adsorption dose and pH to assess the potentiality of mesoporous carbon for the removal of malachite green dye from wastewater. The sorption equilibrium was reached within 30 min. In order to determine the adsorption capacity, the sorption data were analyzed using linear form of Langmuir and Freundlich equation. Langmuir equation showed higher conformity than Freundlich equation. More than 99% removal of MG was reached at the optimum pH value of 8.5. From kinetic experiments, it was concluded that the sorption process followed the pseudo-first-order kinetic model. This study showed that mesoporous carbon can be recommended as an excellent adsorbent at high pH values.     

New antiproliferative 14,15-secopregnane glycosides from Solenostemma argel

Eight new 14,15-secopregnane glycosides, namely argelosides C-J, possessing two ketal functions involved in three five-membered rings, have been isolated from the hairy seeds of Solenostemma argel. Their structures have been established by MS and NMR experiments, combined with quantum mechanical calculations of the ¹³C chemical shifts for the interpretation of the experimental data. On the basis of the obtained results, the structures of argelosides A and B have been revised. Additionally, the effect of these compounds on the VEGF-induced in Kaposi's sarcoma cell proliferation was evaluated. Results indicated that all the compounds reduced the cell proliferation in a dose-dependent manner.     

Spectroscopic studies on some phenylethylamine drugs: Molecular orbital calculations

The electronic absorption spectra of some phenylethylamine drugs, namely, d-pseudoepherine, l-pseudoephedrine, l-ephedrine, dl-ephedrine dl-norephedrine, phenylethylamine, methoxyphenamine, and l-noradrenaline were investigated in polar and nonpolar solvents. The observed transitions were interpreted, and the role of σ-π interaction was explored. Molecular orbital calculations were performed on representatives of the above group of compounds, namely, d-pseudoephedrine, l-ephedrine, and l-noradrenaline using the INDO procedures and adopting the best conformer of the molecule. The transition energy, band intensity, and dipole moments were calculated and corresponded satisfactorily with the experimental values.     

Succinimide sulfonic acid (SuSA): an efficient and recyclable catalyst for the chemoselective <Emphasis Type="Italic">N</Emphasis>-Boc protection of amines

Abstract  

Succinimide sulfonic acid (SuSA) as a stable reagent is easily prepared by the reaction of succinimide with neat chlorosulfonic acid. This compound is able to catalyze the chemoselective conversion of amines to their corresponding N-Boc protected derivatives with (Boc)₂O. All reactions were performed under mild conditions, giving the desired products in good to high yields.     

Application of elastically supported single-walled carbon nanotubes for sensing arbitrarily attached nano-objects

The potential application of SWCNTs as mass nanosensors is examined for a wide range of boundary conditions. The SWCNT is modeled via nonlocal Rayleigh, Timoshenko, and higher-order beam theories. The added nano-objects are considered as rigid solids, which are attached to the SWCNT. The mass weight and rotary inertial effects of such nanoparticles are appropriately incorporated into the nonlocal equations of motion of each model. The discrete governing equation pertinent to each model is obtained using an effective meshless technique. The key factor in design of a mass nanosensor is to determine the amount of frequency shift due to the added nanoparticles. Through an inclusive parametric study, the roles of slenderness ratio of the SWCNT, small-scale parameter, mass weight, number of the attached nanoparticles, and the boundary conditions of the SWCNT on the frequency shift ratio of the first flexural vibration mode of the SWCNT as a mass sensor are also discussed.     

New pyranosyl cembranoid diterpenes from Sarcophyton trocheliophorum

During our continual searching programme for novel bioactive metabolites from Sarcophyton trocheliophorum, collected from Red Sea, we describe herein the isolation and structural elucidation of further two new pyrane-based cembranoid diterpenes: 9-hydroxy-7,8-dehydro-sarcotrocheliol (1) and 8,9-expoy-sarcotrocheliol acetate (2), along with the well-known sarcotrocheliol acetate (3), (+)-sarcophine (4), (+)-sarcophytoxide (5) and (-)-sarcophytoxide (6). The chemical structures of compounds 1 and 2 were determined on the basis of 1D and 2D NMR (¹H, ¹³C, ¹H–¹H COSY, HMQC, HMBC and NOE), mass spectra (ESI and HR-ESIMS) and by comparison with related structures. The antimicrobial activities of the reported compounds 1–6 were investigated. According to the molecular docking study of compounds 1–6 using 3D structure of α,β tubulin in complex with taxol (PDB code 1JFF) and epothilone A (PDB code 1TVK), sarcophine (4) displayed the highest affinity towards both crystal structures, followed by 5 and 6, meanwhile pyrane-based cembranoid diterpenes (1–3) showed less affinity.     

Investigation of the effect of SSP in stabilizing the structure of condensation polymer blends via rheological measurements

We investigated the influence of solid-state polymerization (SSP) process on the reactions that could be taken place at the interphase of polycondensation polymer blends to stabilize the structure obtained after melt mixing. Polyethylene terephthalate (PET) and polyamide 66 (PA66) were melt blended in a mixer, and subsequent SSP process was performed for each sample. FTIR spectra indicated reactions between two polymers. Viscosity behavior and interfacial slip were investigated by measuring shear viscosity of components and blends before and after SSP and then compared with the viscosity calculated from the log-additivity model. The results showed that after SSP, there was no sign of interfacial slip, the slope of viscosity reduction with increasing shear rate became smaller, and the viscosity of blends showed positive deviation at all examined shear rate from the log-additivity model while this deviation was negative at higher shear rate before SSP. SEM micrographs, which were taken after shear stress was imposed on the samples, also indicated the morphological stability after SSP. Furthermore, we studied the effect of functional groups concentration on the reactions at the interphase by using hydrolyzed PET as a precursor for blends. The results showed that slip at the interface would decrease with increasing functional groups of the precursors. These results are particularly valuable for using recycled polymers.     

Fabrication and application of a new modified electrochemical sensor using nano-silica and a newly synthesized Schiff base for simultaneous determination of Cd,Cu and Hg ions in water and some foodstuff samples

A new chemically modified carbon paste electrode was constructed and used for rapid, simple, accurate, selective and highly sensitive simultaneous determination of cadmium, copper and mercury using square wave anodic stripping voltammetry (SWASV). The carbon paste electrode was modified by N,N′-bis(3-(2-thenylidenimino)propyl)piperazine coated silica nanoparticles. Compared with carbon paste electrode, the stripping peak currents had a significant increase at the modified electrode. Under the optimized conditions (deposition potential, −1.100 V vs. Ag/AgCl; deposition time, 60 s; resting time, 10 s; SW frequency, 25 Hz; pulse amplitude, 0.15 V; dc voltage step height, 4.4 mV), the detection limit was 0.3, 0.1 and 0.05 ng mL⁻¹ for the determination of Cd²⁺, Cu²⁺ and Hg²⁺, respectively. The complexation reaction of the ligand with several metal cations in methanol was studied and the stability constants of the complexes were obtained. The effects of different cations and anions on the simultaneous determination of metal ions were studied and it was found that the electrode is highly selective for the simultaneous determination of Cd²⁺, Cu²⁺ and Hg²⁺. Furthermore, the present method was applied to the determination of Cd²⁺, Cu²⁺ and Hg²⁺ in water and some foodstuff samples.     

Stoichiometric ratio and doping effects on the thermal properties of sodium potassium sulphate crystals

The influence of stoichiometric ratio on the phase transition of sodium potassium sulphate (Na_xK_1–x)₂SO₄ crystals is investigated in the temperature range 300–500 K. The stoichiometric ratiox is chosen to bex=0.2, 0.3, 0.4, 0.8 and 0.9. The study has been carried out by using differential scanning calorimetry, DSC technique. The value of the specific heat,C _p, at the transition temperature,T _c , increases asx is increased up tox=0.4 and then decreases for higher values ofx. The change in the specific heat, C _p, is following a relation of the form C _p C _p (T–T _c /T _c )^– with = 0.12 which is in a fair agreement with the 3d Ising model. Insertion of Cu²⁺ ions into the lattice of (Na_xK_1–x)₂SO₄ crystals leads to a multiple peak in the temperature dependence ofC _p. The results are discussed from thermodynamical point of view.We would like to thank Prof. E. F. El-Wahidy, Prof. of Solid State Physics and Head of Physics Department, Faculty of Science, Alexandria University, for his interest and support of this work.