Cytotoxicity and cellular impact of dinuclear organoiridium DNA intercalators and nucleases with long rigid bridging ligands

The DNA binding modes and cleavage properties of novel dinuclear Ir(III) polypyridyl (pp) complexes [{(η(5)-C(5)Me(5))Ir(pp)}(2)(μ-B)](CF(3)SO(3))(4) depend on the lengths of their rigid bridging dipyridinyl ligands B. Mono-intercalation and strong DNA cleavage properties were observed for the dipyrido[2,3-a:2',3'-c]phenazine (dppz) complexes 1 (B = 4-[(E)-2-(4-pyridinyl)ethenyl]pyridine) and 3 (B = 4-(2-pyridin-4-ylethynyl)pyridine), whose intracationic Ir···Ir' distances are about 13.1 and 13.3 ?, respectively. In contrast, UV/Vis and CD spectra were in accordance with a stable intertwined bis-intercalation mode for pairs of cations of 5 (B = 1,4-di(2-pyridin-4-ylethynyl)benzene), whose much longer Ir···Ir' distance of 20.6 ? allows a stack of five aromatic chromophores to be sandwiched between its effectively parallel dppz ligands. Whereas both 1 and 3 cleaved DNA in the dark, complex 5 exhibited only photoinduced nuclease activity. A significantly higher antiproliferative activity towards MCF-7 breast carcinoma cells was observed for the nucleases 1 and 3, whose IC(50) values of 0.61 and 0.49 were much lower than that of 2.2 μM for bis-intercalator 5. Values of 3.8 μM, only slightly higher than that of 5, were recorded for the 5,6-dimethylphenanthroline complexes 4 and 6, whose bridging ligands are identical to those of 3 and 5, respectively. Marked antileukemic activity (IC(50) = 6-7 μM) associated with increased levels of reactive oxygen species and apoptosis induction was recorded for both 3 and 5 towards Jurkat cells at concentrations of 5 μM and above. Online studies with a sensor chip system indicated that 5 μM solutions of these complexes invoke a rapid and massive reduction in MCF-7 cell respiration.     

Efficacy of Ficus spp. on renal injury induced by hypercholesterolaemia

The ethanol and hexane extracts of Ficus microcarpa, Ficus religiosa and Ficus mysorensis leaves were evaluated against renal injury induced by hypercholesterolaemia. Phytochemical screening of the investigated plants was undertaken. For the in vivo study, all rats were orally given cholesterol (30?mg?kg?1 body weight, BW) and leaves extract (500?mg?kg?1 BW) five times per week for 9 weeks. Hypercholesterolaemic rats showed significant increases in urea nitrogen and creatinine while serum protein and albumin levels, nitric oxide (NO), Na?-K?-ATPase and phospholipids in kidney tissue were all decreased. Treatment with leaves extract improved kidney function indices (urea nitrogen, creatinine, serum protein and albumin), kidney disorder biochemical parameters (NO, Na?-K?-ATPase and phospholipids), haematological profile (haemoglobin, RBCs and WBCs) and kidney histopathology. In conclusion, Ficus spp. succeeded in improving renal injury induced by hypercholesterolaemia, with the most potent effects seen while using Ficus microcarpa hexane extract.     

Investigating parameters on the preparation of mesoporous activated carbons by the combination of chemical and physical activations using the Taguchi method

Mesoporous activated carbons were prepared from coconut shell by the combination of chemical and physical activation methods. Zinc chloride and CO₂ were used as chemical and physical agents, respectively. Optimum parameters were obtained from investigating the effect of various factors at different levels on the methane storage of wet activated carbons using the Taguchi experimental design method. Soaking time, carbonization temperature, and carbonization time were found as effective parameters in the methane storage. Finally, after achieving optimum levels for each factors based on the enhancement of methane storage, a confirmation experiment was conducted. Methane uptakes of the activated carbons were measured at temperature of 2?^°C up to the pressure of 80 bar and it turned out that the maximum amount of methane storage (241?V/V) had a good agreement with the predicted result from the Taguchi method.     

Performance evaluation of ion‐exchange chromatography in capillary format

The performance of a recently introduced capillary ion‐exchange chromatography system was explored. Experiments were conducted in isocratic mode with a commercial capillary anion‐exchange column (id = 0.4 mm, L = 15 cm) using a five‐anion standard mixture. The achieved results were compared to the performance of a standard bore ion‐exchange system (id = 4 mm, L = 15 cm), which was considered as a reference. The first‐generation capillary columns exhibited a minimal reduced plate‐height value below two witnessing a good packing quality and system performance. However, compared to the standard bore system the capillary system displayed an increased apparent C‐term which could be due to a difference in packing morphology and/or possible external band‐broadening contributions. For fast separations, the standard bore system outperformed the capillary system, while for complex separations both systems performed nearly equally well. In addition, the retention characteristics of the capillary system were investigated. To illustrate the suitability of the capillary system, the analysis of real‐world water samples originating from two local Belgian rivers was demonstrated.     

Sol–gel-based molecularly imprinted xerogel for capillary microextraction

A novel molecularly imprinted xerogel (MIX) based on organically modified silica (ORMOSIL) was successfully prepared for on-line capillary microextraction (CME) coupled with high-performance liquid chromatography (HPLC). The sol-gel-based xerogel was prepared using only one precursor and exhibited extensive selectivity towards triazines along with significant thermal and chemical stability. Atrazine was selected as a model template molecule and 3-(trimethoxysilyl)propylmethacrylate (TMSPMA) as a precursor in which the propylmethacrylate moiety was responsible for van der Waals, dipole-dipole, and hydrogen-bond interactions with the template. This moiety plays a key role in creation of selective sites while methoxysilyl groups in TMSPMA acted as crosslinkers between the template and the propylmethacrylate moiety. Moreover, a non-imprinted xerogel (NIX) was also prepared in the absence of the template for evaluating the extraction efficiency of the prepared MIX. Then, the prepared imprinted and non-imprinted xerogels were used for extraction of three selected analytes of triazines class including atrazine, ametryn, and terbutryn, which have rather similar structures. The extraction efficiency of the prepared xerogel for atrazine, the template molecule, was found to be ten times greater than the efficiency achieved by the non-imprinted one. In the meantime, the extraction efficiency ratio of MIX to NIX for ametryn and terbutryn was also rather significant (eight times). Moreover, other compounds from different classes including dicamba, mecoprop, and estriol were also analyzed to evaluate the selectivity of the prepared MIX towards triazines. The ratio of enrichment factors (EF) of MIX to NIX for atrazine, ametryn, terbutryn, dicamba, mecoprop, and estriol were about 10, 8, 8, 2, 2, and 3, respectively. The linearity for the analytes was in the range of 5-700 μg L(-1). Limit of detection was in the range of 1-5 μg L(-1) and the RSD% values (n = 5) were all below 6.6% at the 20 μg L(-1) level. The developed method was also applied to real water samples and the relative recovery percentages obtained for the spiked water samples were from 92 to 104%. The CME loop, containing the prepared MIX, exhibited a rather long life time due to its remarkable solvent and mechanical stability. Even after 100 runs, no decrease in the peak areas was observed. The developed method could easily provide the possibility of preparing a selective sorbent in a unique way with the lowest possible cost and time.     

Hydrodynamic Characteristics and Adsorption Particularity of Nanobiological Feedstock Along the Bed Height in a Novel Chromatography Column

Expanded bed adsorption (EBA) is a practical method for the separation of nanoparticulates. In order to analysis the local hydrodynamic and adsorption behavior of nanoparticle (NP)-based biological feedstock, a modified Nano Biotechnology Group EBA column with a 26-mm inner diameter was used to withdraw liquid from different axial positions of the column. Fabricated egg albumin (EA) NPs with an average size of 70 nm were employed as a model system and viral size/charge mimic to assess the relationship between hydrodynamic and adsorption performance of NPs at the different column regions. The effects of influential factors, including flow velocity and initial concentration of NPs, on NP hydrodynamic behavior and adsorption kinetics along the bed height were investigated. NP hydrodynamic studies confirmed that non-uniform behavior dominated the system and a decreasing trend of liquid mixing/dispersion with increase of bed height was observed in this column. The results demonstrated an increase in the mixing/dispersion at certain bed heights with the increase in both the velocity and feed initial concentration. Breakthrough curves were measured at various column points to determine the adsorption performance [dynamic binding capacity (DBC) and yield] in different bed positions/zones. Yield and DBC of NPs were improved along the bed height, whereas liquid velocity had the opposite effect. Increasing the initial concentration of NPs enhanced only the DBC. Separation of EA NPs under optimal conditions was 87 %, which is an excellent result for a one-pass frontal chromatography method.

     

Copper Supported on the SiO2 Nanoparticle in Click Chemistry: An Alternative Catalytic System for Regioselective and One‐Pot Synthesis of 1,2,3‐Triazoles and β‐Hydroxytriazoles

In this work, readily prepared copper supported on the SiO₂ nanoparticles has been found to effectively catalyze the 1,3‐dipolar cycloaddition of a variety of azides, alkynes, epoxides and sodium azide, furnishing the corresponding 1,2,3‐triazoles and β‐hydroxytriazoles. Click reaction proceeds in short reaction times and under mild reaction conditions, and the resulting products are obtained in good yields at ambient temperature.     

Development and application of a validated stability-indicating HPLC method for simultaneous determination of granisetron hydrochloride, benzyl alcohol and their main degradation products in parenteral dosage forms

A simple, rapid and sensitive reversed phase high performance liquid chromatographic method using photodiode array detection was developed and validated for the simultaneous determination of granisetron hydrochloride, benzyl alcohol, 1-methyl-1H-indazole-3-carboxylic acid (the main degradation product of granisetron) and benzaldehyde (the main degradation product of benzyl alcohol) in granisetron injections. The separation was achieved on Hypersil BDS C8 (250 mm × 4.6 mm i.d., 5 μm particle diameter) column using a mobile phase consisted of acetonitrile:0.05 M KH₂PO₄:triethylamine (22:100:0.15) adjusted to pH 4.8. The column was maintained at 25 °C and 20 μL of solutions was injected. Photodiode array detector was used to test the peak purity and the chromatograms were extracted at 210 nm. Naphazoline hydrochloride was used as internal standard. The method was validated with respect to specificity, linearity, accuracy, precision, limit of quantitation and limit of detection. The validation acceptance criteria were met in all cases. Identification of the pure peaks was carried out using library match programmer and wavelengths of derivative optima of the spectrograms of the peaks. The method was successfully applied to the determination of the investigated drugs and their degradation products in different batches of granisetron injections. The method was proved to be sensitive for the determination down to 0.03 and 0.01% of granisetron degradation product and benzaldehyde, respectively, which are far below the compendia limits for testing these degradation products in their corresponding intact drugs.