Determination of Surface Functional Groups in Lignocellulosic Materials by Chemical Derivatization and ESCA Analysis

Simple and convenient methods for determining surface chemical composition of lignocellulosic materials are described. The methods are based on vapor phase fluorine surface derivatization with either trifluoro acetic anhydride (TFAA), tri-fluoro ethanol (TFE) or pentafluorophenyl hydrazine (PFPH) and subsequent Electron Spectroscopy for Chemical Analysis (ESCA). Model cellulosic surfaces with well defined functionalities were used to optimize the derivatization reaction conditions. Detection and accessibility of surface hydroxyl functional groups were investigated in cotton and regenerated cellulose as models. Carboxymethyl cellulose (CMC) was used as a model surface for detection and quantification of carboxylic acid groups. Theoretical conversion curves for derivatization reactions were calculated and used to evaluate the extent of the reactions on the model surfaces. It was found that the conversion was higher for the regenerated cellulose and CMC than for cotton. The protocols developed using the model surfaces were applied to a case study on wood fibers with different degrees of complexity, namely dissolving and chemithermomechanical (CTMP) pulp. Untreated and oxygen-plasma modified pulps were compared with respect to the surface composition of functional groups. According to the derivatization reactions, functionalities containing oxygen were significantly increased on the plasma-treated samples. The effect of the treatment was found to be dependent on the type of pulp. Fluorine derivatization is shown to be an unambiguous method for clear assessment of the chemical functionalities of cellulosic surfaces.     

Spectrothermal studies of 1,10-phenanthroline complexes of Co(II), NI(II), Cu(II) and Cd(II) orotates

The 1,10-phenanthroline (phen) complexes of Co(II), Ni(II), Cu(II) and Cd(II) orotates were synthesized and characterized by elemental analysis, magnetic susceptibility, spectral methods (UV-vis and FTIR) and thermal analysis techniques (TG, DTG and DTA). The Co(II), Ni(II), Cu(II) and Cd(II) ions in diaquabis(1,10-phenanthroline)metal(II) diorotate octahedral complexes [M(H₂O)₂(phen)₂](H₂Or)₂·nH₂O (M=Co(II), n=2.25; Ni(II), n=3; Cu(II) and Cd(II), n=2) are coordinated by two aqua ligands and two moles of phen molecules as chelating ligands through their two nitrogen atoms. The monoanionic orotate behaves as a counter ion in the complexes. On the basis of the first DTG_max, the thermal stability of the hydrated complexes follows the order: Cd(II), 68°C 68°C     

Structure of 4,4′-butane-(1,4,7-three-p-tolylsulphonyl-1,4,7-three amine) diphthalonitrile

Abstract

The crystal structure of the title compound, C₄₁ H₃₅ N₇ O₆ S₃ was determined as monoclinic by single crystal X-Ray diffraction technique. The molecular structure was identified by IR, ¹H-NMR, ¹³C-NMR and elemental analysis. The crystal parameters of this compound are as follows: monoclinic P 2 1/n, a = 12.694(2) Å, b = 26.204(2) Å, c = 13.005(2) Å, β = 102.95(2)°, V = 4216.02(1) Å.³, Z = 4, Dx = 1.289 g/cm³, F(000) = 1704, λ (MoKα) = 0.71070 Å, μ = 0.2 mm^?1. The structure was solved by SHELXS-97 and refined by SHELXL-97. R = 0.06 for 3178 observed reflections with I > 2σ (I).     

Study of phase transition in a [CdHgI4 : 0.2AgI] mixed conducting composite system doped with KI and K2SO4

New composite superionic systems, [CdHgI₄?:?0.2AgI]?:?0.xKI and [CdHgI₄?:?0.2AgI]?:?0.xK₂SO₄ (x?=?0.2, 0.4, 0.6?mol. wt%), were prepared, using [CdHgI₄?:?0.2AgI] mixed composite system as the host. Electrical conductivity was measured to study the transition behavior at frequencies of 100?Hz, 120?Hz, 1?kHz, and 10?kHz in the temperature range from 150°C to 250°C using a GENRAD 1659 RLC Digibridge. A sharp increase in conductivity was observed during β?→?α phase transition. Upon increasing the dopant-to-host ratio, the conductivity of the superionic systems exhibited Arrhenius (thermally activated)-type behavior. Differential thermal analysis, differential scanning calorimetry, thermogravimetric analysis, and X-ray powder diffraction were performed to confirm the doping effect and transition in the host. The phase transition temperature increased with an increase in the dopant concentration. Activation energies in eV for pre- and post-transition phase behavior are reported.     

The removal of inorganic ions from solutions with fibrous ion-exchange cellulose and checking of the purified substances by neutron-activation analysis

Summary For the rapid removal of heavy metal impurities from large volumes of solutions, ion-exchange cellulose loose fibres have proved to be effective. Distilled water and absolute ethanol were purified by the column technique. For the checking of the effectiveness of the purification, analysis with carboxycellulose and neutron activation were used. The results were in good agreement. The purification is effective up to ppt concentrations.

---

Zusammenfassung Zur Entfernung von Schwermetallverunreinigungen aus Flüssigkeiten großen Volumens entsprachen am besten die watte-förmigen Ionaustausch-Zellulosen. Wir haben destilliertes Wasser und absoluten Äthylalkohol von ihren Verunreinigungen in Kolonnen gereinigt. Zur Kontrolle der Wirksamkeit der Reinigung haben wir 1) die Carboxy-Zellulose-Analyse und 2) die Neutronen-Aktivierungsanalyse verwendet. Die Resultate der Methoden 1) und 2) stimmen gut überein. Die Reinigung ist bis zur ppt-Konzentration wirksam.