[{Cu(phen)2}(μ‐malato){Cu(phen)(NO3)}](NO3)·4H2O: malate acting as a tetra­dentate and dibridging ligand in a dinuclear copper complex

The crystal structure of the title compound, μ‐2‐hydroxy­butane­dioato‐1κ²O⁴,O^4′:2κ³O¹,O²,O⁴‐nitrato‐2κO‐tris­(1,10‐phen­anthroline)‐1κ⁴N,N′;2κ²N,N′‐dicopper(II) nitrate tetra­hydrate, [Cu₂(C₄H₃O₅)(NO₃)(C₁₂H₈N₂)₃](NO₃)·4H₂O, contains an unsymmetrical dinuclear copper complex with Cu(phen)₂ and Cu(phen)(NO₃) moieties (phen is 1,10‐phenanthroline) bridged by a malate (2‐hydroxy­butane­dioate) ligand, which acts as a double‐bridging and tetra­dentate ligand. As a result of this double‐bridging action, especially the direct coordination of the O atom of one carboxyl­ate group of malate to the two Cu atoms, the Cu⋯Cu distance is only 4.199 (1) Å and the two phen planes are roughly parallel [the shortest inter­planar distance is 3.28 (1) Å], exhibiting an obvious intra­molecular π–π stacking inter­action.     

超临界反应条件下Y型分子筛催化剂失活的研究

对苯烷基化过程中Ｙ型分子筛催化剂的失活进行了多方面的实验研究。结果表明，超临界条件下该催化剂的活性寿命比液相条件下长达四倍以上，借助色－质谱联用机分析两种操作的反应产物，发现含有多环物质，并且它们的种类和数量随条件而不同。根据热力学原理，建立了多环物在超蚧流体中的溶解模型，并以并四苯，并五苯和并六苯作为焦前物模拟物进行了计算。     

Effects of gamma irradiation on the yields of volatile extracts of Angelica gigas Nakai

The study was carried out to determine the effects of gamma irradiation on the volatile flavor components including essential oils, of Angelica gigas Nakai. The volatile organic compounds from non- and irradiated A. gigas Nakai at doses of 1, 3, 5, 10 and 20 kGy were extracted by a simultaneous steam distillation and extraction (SDE) method and identified by GC/MS analysis. A total of 116 compounds were identified and quantified from non- and irradiated A. gigas Nakai. The major volatile compounds were identified 2,4,6-trimethyl heptane, α-pinene, camphene, α-limonene, β-eudesmol, α-murrolene and sphatulenol. Among these compounds, the amount of essential oils in non-irradiated sample were 77.13%, and the irradiated samples at doses of 1, 3, 5, 10 and 20 kGy were 84.98%, 83.70%, 83.94%, 82.84% and 82.58%, respectively. Oxygenated terpenes such as β-eudesmol, α-eudesmol, and verbenone were increased after irradiation but did not correlate with the irradiation dose. The yields of active substances such as essential oil were increased after irradiation; however, the yields of essential oils and the irradiation dose were not correlated. Thus, the profile of composition volatiles of A. gigas Nakai did not change with irradiation.     

A novel three‐dimensional cadmium(II) coordination polymer incorporating 1,4‐bis­(1,2,4‐triazol‐1‐ylmethyl)­benzene and thio­cyanate

In the title complex, poly[cadmium(II)‐μ₂‐1,4‐bis­(1,2,4‐triazol‐1‐ylmeth­yl)benzene‐di‐μ₂‐thio­cyanato], [Cd(NCS)₂(C₁₂H₁₂N₆)]_n, the Cd^II atom lies on an inversion centre in a distorted octa­hedral environment. Four N atoms from the thio­cyanate and 1,4‐bis­(1,2,4‐triazol‐1‐ylmeth­yl)benzene (bbtz) ligands occupy the equatorial positions, and two S atoms from symmetry‐related thio­cyanate ligands occupy the axial positions. The benzene ring of the bbtz ligand lies about an inversion centre. Single thio­cyanate bridges link the Cd^II atoms into two‐dimensional sheets containing novel 16‐membered [Cd₄(μ‐NCS‐N:S)₄] rings. The bbtz ligands further link these two‐dimensional sheets into an unprecedented covalent three‐dimensional network for the cadmium–thio­cyanate system.     

Effect of Fiber-Polymer Interactions on Fracture Toughness Behavior of Carbon Fiber-Reinforced Epoxy Matrix Composites

The effect of anodic oxidation on high-strength polyacrylonitrile-based carbon fibers has been studied in terms of fiber surface energetics and fracture toughness of the composites. According to contact angle measurements based on the wicking rate of a test liquid, anodic oxidation leads to an increase in surface free energy, mainly due to the increase of its specific (or polar) component. For the carbon-fiber-reinforced epoxy resin matrix system, a direct linear relationship is shown between the specific component and the critical stress intensity factor measured by the single edge notched beam fracture toughness test. From a surface-energetic point of view, the anodic treatment may be suitable for carbon fibers incorporated in a polar organic matrix, resulting in an increased specific component of the surface free energy. Good wetting plays an important role in improving the degree of adhesion at interfaces between fibers and matrices of the resulting composites. Copyright 2000 Academic Press.     

Spontaneous and infrared induced electron detachment from negatively charged helium nanodroplets

A beam of helium nanodroplets, with sizes ranging up to N = 10⁷ or more atoms, is produced by fragmentation of a low entropy supersonic expansion. It subsequently is excited by electron impact, producing various charged and metastable droplet states depending on the electron energy. We will describe experiments with negatively charged cluster ions, which are observed for low energy impacts when N >2×10⁵. In these experiments, after a flight time in high vacuum of several milliseconds the droplets pass through a weak transverse field above an electron multiplier. A signal from spontaneously detached electrons is observed, which suggests that the ion, while long lived, is inherently metastable. Furthermore, when the beam is crossed with an infrared light beam above the detector, the detachment rate is significantly increased. The wavelength dependence of this light induced signal has a broad peak near 1.5μm. By deflection measurements it is found that the spontaneous detachment signal comes preferentially from smaller clusters, while the light induced signal comes predominantly from larger ones. By stopping potential measurements one can conclude that both kinds of detached electrons have energies below 1eV, with photo detached electrons the more energetic.     

Synthesis of a Polymer-bound Sensitizer and its Application in the Photoisomerization of trans-Vitamin D_3 to cis-Vitamin D_3

The photochemistry of the vitamin D family and their precursors has been the subject of extensive studies for many years1-4. Most of the studies focus on the photoisomer- ization of 7-dehydrocholesterol and that of tachysterol to previtamin D3, which is of commercial importance in the synthesis of vitamin D34, 5. Recently the cis/trans isomerization of vitamin D analogs (Scheme 1) draws attention because of its importance in the synthesis of hydroxylated vitamin D metabolites6. However, o…     

Inhibitory effects of 1,3-selenazol-4-one derivatives on mushroom tyrosinase

This study reports depigmenting potency of 1,3-selenazol-4-one derivatives, which would be based upon the finding of direct inhibition to mushroom tyrosinase. 1,3-Selenazol-4-one derivatives exhibited inhibitory effect on dopa oxidase activity of mushroom tyrosinase. In this study, inhibitory effects of six kinds of 1,3-selenazol-4-one derivatives (A, B, C, D, E and F) on mushroom tyrosinase were investigated. Compounds at a concentration of 500 microM exhibited 33.4-62.1% of inhibition on dopa oxidase activity of mushroom tyrosinase. Their inhibitory effects were higher than that of kojic acid (31.7%), a well known tyrosinase inhibitor. 2-(4-Methylphenyl)-1,3-selenazol-4-one (A) exhibited the strongest inhibitory effect among them dose-dependently and in competitive inhibition manner.     

Vibrational Relaxation in beta-Carotene Probed by Picosecond Stokes and Anti-Stokes Resonance Raman Spectroscopy

Picosecond time-resolved Stokes and anti-Stokes resonance Raman spectra of all-trans-beta-carotene are obtained and analyzed to reveal the dynamics of excited-state (S(1)) population and decay, as well as ground-state vibrational relaxation. Time-resolved Stokes spectra show that the ground state recovers with a 12.6 ps time constant, in agreement with the observed decay of the unique S(1) Stokes bands. The anti-Stokes spectra exhibit no peaks attributable to the S(1) (2A(g) (-)) state, indicating that vibrational relaxation in S(1) must be nearly complete within 2 ps. After photoexcitation there is a large increase in anti-Stokes scattering from ground-state modes that are vibrationally excited through internal conversion. The anti-Stokes data are fit to a kinetic scheme in which the C=C mode relaxes in 0.7 ps, the C-C mode relaxes in 5.4 ps and the C-CH(3) mode relaxes in 12.1 ps. These results are consistent with a model for S(1)-S(0) internal conversion in which the C=C mode is the primary acceptor, the C-C mode is a minor acceptor, and the C-CH(3) mode is excited via intramolecular vibrational energy redistribution.     

Thermal degradation behavior of poly(4-hydroxybutyric acid)

Thermal degradation behavior of poly(4-hydroxybutyric acid) (P(4HB)) was investigated by thermogravimetric and pyrolysis-gas chromatography mass spectrometric analyses under both isothermal and non-isothermal conditions. Based on the thermogravimetric analysis, it was found that two distinct processes occurred at temperatures below and above 350 °C during the non-isothermal degradation of P(4HB) samples depending on both the molecular weight and the heating rate. From ¹H NMR analysis of the residual P(4HB) molecules after isothermal degradations at different temperatures, it was confirmed that the ω-hydroxyl chain-end was remained unchanged in the residual P(4HB) molecules at temperatures below 300 °C, while the ω-chain-end of P(4HB) molecules was converted to 3-butenoyl units at temperatures above 300 °C. In contrast, the majority of the volatile products evolved during thermal degradation of P(4HB) was γ-butyrolactone regardless of the degradation temperature. From these results, it is concluded that during the thermal degradation of P(4HB), the selective formation of γ-butyrolactone via unzipping reaction from the ω-hydroxyl chain-end predominantly occurs at temperatures below 300 °C. At temperatures above 300 °C, both the cis-elimination reaction of 4HB unit and the formation of cyclic macromolecules of P(4HB) via intramolecular transesterification take place in addition to unzipping reaction from the ω-hydroxyl chain-end. Finally, the primary reaction of thermal degradation of P(4HB) at temperatures above 350 °C progresses by the cyclic rupture via intramolecular transesterification of P(4HB) molecules with a release of γ-butyrolactone as volatile product. Moreover, we carried out the thermal degradation tests for copolymer of 93 mol% of 4HB with 7 mol% of 3-hydroxybutyric acid (3HB) to examine the effect of 3HB units on thermal stability of P(4HB).