SiGe (Ge-dot) heterojunction phototransistors for efficient light detection at 1.3–1.55 μm

The aim of this work is to develop a Si/SiGe HBT-type phototransistor with several Ge dot layers incorporated in the collector, in order to obtain improved light detectivity at 1.3–1.55 μm. The MBE grown HBT detectors are of n–p–n type and based on a multilayer structure containing 10 Ge-dot layers (8 ML in each layer, separated by 60 nm Si spacer) in the base-collector junction. The transistors were processed for normal incidence or with waveguide geometry where the light is coupled through the edge of the sample. The measured breakdown voltage, BV_ceo, was about 6 V. Compared to a p–i–n reference photodiode with the same dot layer structure, photoconductivity measurements show that the responsivity is improved by a factor of 60 for normal incidence at 1.3 μm. When the light is coupled through the edge of the device, the detectivity is even further enhanced. The measured photo-responsivity is more than 100 and 5 mA/W at 1.3 and 1.55 μm, respectively.     

镁掺杂对In2O3电导和气敏性能的影响

用共沉淀法制备了Mg2 + 掺杂的In2 O3 纳米粉 ,研究了镁掺杂对In2 O3 电导和气敏性能的影响 .结果表明 :MgO和In2 O3 间可形成有限固溶体In2 -xMgxO3 (0≤x≤ 0 .40 ) ;MgIn× 电离的空穴对材料导带电子的湮灭 ,使掺镁纳米粉的电导变得很小 ;n(Mg2 + )∶n(In3 + ) =1∶2共沉淀物于 90 0℃下热处理 4h ,用所得的纳米粉制作的传感器在 32 0～ 370℃下 ,对 45 μmol/LC2 H5OH的灵敏度达 10 2 .5 ,为相同浓度干扰气体Petrol的 12倍多 .     

3族新的不含紧优与几乎紧优的有向双环网络无限族

给出了3族新的不含紧优与几乎紧优的有向双环网络.     

Epoxy resin containing polyphenylsilsesquioxane: Preparation,morphology, and thermomechanical properties

Polyphenylsilsesquioxane (PPSQ) was incorporated into an epoxy resin to prepare organic–inorganic composites, and two strategies were adopted to afford composites with different morphologies. Phase separation induced by polymerization occurred in the physical blending system. However, nanostructured composites were obtained when a catalytic amount of aluminum triacetylacetonate was added to mediate the reaction between PPSQ and diglycidyl ether of bisphenol A (DGEBA). The intercomponent reaction significantly suppressed the phase separation on the micrometer scale. Organic–inorganic composites with different morphologies displayed quite different thermomechanical properties. Both differential scanning calorimetry and dynamic mechanical analysis showed that the nanostructured composites possessed higher glass‐transition temperatures than the phase‐separated composites with the same loading of PPSQ, although the intercomponent reaction between PPSQ and DGEBA reduced the crosslinking density of the epoxy matrix. This result was ascribed to the presence of nanosized PPSQ domains in the nanostructured composites, which acted as physical crosslinking sites and thus reinforced the epoxy networks. The nanoreinforcement of the PPSQ domains afforded the enhanced dynamic storage modulus for the nanostructured composites in comparison with the phase‐separated composites with a PPSQ concentration less than 15 wt %. In terms of thermogravimetric analysis, the organic–inorganic composites displayed improved thermal stability and flame retardancy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1093–1105, 2006     

Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006     

荧光光度法直接测定高纯氧化钕中的痕量镨和铈

使用Ｐ－ＥＬＳ５０荧光光谱仪，在盐酸介质中，用同一激发波长激发，分别测定Ｐｒ（Ⅲ）（ｎｍ）和Ｃｅ（Ⅲ）（３５６ｎｍ）发射峰强度。     

多功能沸点仪的研究

本文提出了两种新型沸点仪——CP-Ⅰ型和CP-Ⅱ型沸点仪, 阐述了仪器各部分结构的设计思想和原理, 并对仪器的性能和各部分功能进行了较为完整的实验考核, 获得了预期的效果。     

希土氯化物与α－羟基异丁酸配合物的合成、表征、晶体结构及抑菌效应的研究

合成了十五种希土氯化物与α－羟基异丁酸配合物。对配合物的物化性质进行了表征，测定了Ｌａ（ＨＩＢ）２．Ｃｌ．２Ｈ２Ｏ的晶体结构，配合物属单斜晶系，Ｃ２／Ｃ空间群，晶胞参数：ａ＝９．００７（５）；ｂ＝８．７００（３）；ｃ＝１９．７７０（５）ａ；β＝９６μο（３）°；Ｚ＝４。合成的十五种配合物均具有较强的抑菌能力。     

奋乃静和氟奋乃静的毛细管电泳柱端喷壁式安培检测

应用自组装毛细管电泳．安培检测装置，建立了同时分离检测抗精神病药奋乃静与氟奋乃静的新方法。在1050mV(vs．Ag／AgCl)检测电位下，奋乃静与氟奋乃静的检出限分别达0．060mg／L与0．075mg／L。在最佳检测条件下，两组分的响应电流与浓度之间有着良好的线性关系，线性范围为0．75～75mg／L。将方法用于药物片剂以及模拟尿样和血清样品中奋乃静和氟奋乃静的测定，结果令人满意。