Electrochemical aptamer sensor for highly sensitive detection of mercury ion with Au/Pt@carbon nanofiber‐modified electrode

In this paper, an electrochemical aptamer sensor was proposed for the highly sensitive detection of mercury ion (Hg²⁺). Carbon nanofiber (CNF) was prepared by electrospinning and high‐temperature carbonization, which was used for the loading of platinum nanoparticles (PtNPs) by the hydrothermal method. The Pt@CNF nanocomposite was modified on the surface of carbon ionic liquid electrode (CILE) to obtain Pt@CNF/CILE, which was further decorated by gold nanoparticles (AuNPs) through electrodeposition to get Au/Pt@CNF/CILE. Self‐assembling of the thiol‐based aptamer was further realized by the formation of Au‐S bond to get an electrochemical aptamer sensor (Aptamer/Au/Pt@CNF/CILE). Due to the specific binding of aptamer probe to Hg²⁺ with the formation of T‐Hg²⁺‐T structure, a highly sensitive quantitative detection of Hg²⁺ could be achieved by recording the changes of current signal after reacting with Hg²⁺ within the concentration range from 1.0 × 10^?15 mol/L to 1.0 × 10^?6 mol/L and the detection limit of 3.33 × 10^?16 mol/L (3σ). Real water samples were successfully analyzed by this method.     

高热稳定性二氧化硅包覆的Au25纳米簇的制备和催化应用

具有独特的电子和几何结构,原子精确控制的金纳米簇(<2 nm)成为一种新的具有广泛研究和应用前景的纳米催化剂.负载在氧化物表面的金纳米簇通常会在高于300°C时聚集或长大.人们已经通过多种方法成功制备了对于非原子精确控制的热稳定性的金纳米颗粒.主要包括利用金属与载体强相互作用,用可还原的金属氧化物来稳定金纳米颗粒;利用物理阻隔作用使用高比表面积的载体或制备核壳、纳米粒子镶嵌在载体中来稳定金纳米颗粒.对于原子精确控制的金纳米簇,由于其外边包覆着一层配体,将其负载到载体上时要保证配体不被破坏才能保证金纳米簇的结构完整性,负载后通常要除去配体才能使催化活性位曝露出来.目前,高热稳定性(>300°C)的金纳米簇的制备方法还较少.由于金与 SiO2相互作用较弱,将超小(<2 nm)的金纳米粒子包覆于其中非常困难.因此,本文首先制备了1.3 nm的含有硅酯键的巯基配体(3-巯丙基三甲氧基硅烷)保护的 Au25[SC3H6Si(OCH3)3]18,然后将其在刚成核的 SiO2表面与正硅酸四乙酯共水解,得到了既保留了 Au25的完整结构,又避免了 Au25之间相互水解的 Au25(SC3H6SiO3)18@SiO2纳米材料.漫反射固体紫外-可见光谱证明了 Au25在包覆完成后结构的完整性.透射电镜结果表明, Au25纳米簇焙烧至400°C未发生明显聚集长大.对硝基苯酚还原实验结果表明,不同温度处理后的 Au25@SiO2配体在200°C开始脱除,温度高于传统的负载型 Au25催化剂,表明 Au25是在 SiO2内部而不是在表面,从而使配体不易离去.400°C处理后的 Au25@SiO2对4-硝基苯酚还原表现出最高的反应活性,表明该纳米簇在400°C处理后没有发生明显聚集长大.     

超高效液相色谱-四极杆飞行时间质谱法快速筛查水产品中15种碱性合成色素

建立了超高效液相色谱-四极杆飞行时间质谱(UPLC-Q-TOF MS)快速检测水产品中15种碱性合成色素的方法。水产样品经乙腈(含10%(v/v)乙酸)提取,采用C₁₈复合硅胶基质分散管进行样品净化处理。目标物采用C₁₈色谱柱分离,以乙腈和0.1%(v/v)甲酸-5 mmol/L乙酸铵溶液为流动相,梯度洗脱,四极杆飞行时间串联质谱电喷雾正离子模式检测。结果表明:15种碱性色素的定量限(LOQs, S/N=10)为0.1~100 μg/kg,并在各自的线性范围内线性关系良好,相关系数(r)≥0.993。在3个加标水平下的平均回收率为80.60%~107.37%,测定结果的相对标准偏差为3.33%~6.69%(n=6)。该方法快速、简便、灵敏度高,适用于日常水产品中15种碱性合成色素的快速筛查。     

半格分次弱Hopf代数的$G$-Cleft扩张

本文首先将Clifford幺半群代数分解为交叉积的半格直和,然后将这个结果通过$H$-$G$-cleft扩张推广到所谓的$G$-交叉积上.     

表面等离子体共振技术在电化学反应过程研究中的应用

简述了表面等离子体共振(SPR)的基本原理,并综述了表面等离子体共振技术在电化学反应过程中的应用。SPR技术可以无需任何标记原位实时地检测分子间的相互作用,也可用于连续监测吸附/脱附和缔合/解离过程。表面等离子共振光谱(SPRS)与电化学技术结合可用来同时表征和处理电极/溶液的界面,在电化学掺杂/去掺杂过程、吸附/脱附反应的研究、痕量物质的检测、薄膜厚度、介电常数的测定等方面的应用已取得了很大的进展。     

用于双光子激发荧光寿命显微成像的高重复频率皮秒扫描相机

建立了一台基于新研制的高重复频率皮秒扫描相机的双光子激发荧光寿命显微成像系统,重点介绍所研制的高重复频率皮秒扫描相机。为了在高时间分辨力的同时扩大时间测量范围,实现大面积两维空间高时间分辨取样测量,从而提高采样速率和更有效地发挥扫描相机的作用,设计和研制了一种大面积、高时间分辨力扫描变像管和一种重复频率高达1MHz的斜坡电压扫描电路。基于上述关键部件所研制的扫描相机具有重复频率高、扫描速度可调、时间分辨力高、工作面积大、非线性低、触发晃动小等优点。用钛宝石飞秒激光器作为激光脉冲源,通过脉冲提取器将76MHz的高重复频率降低为1MHz,采用可调延时器和标准具对扫描相机的时间分辨力、扫描速度和非线性进行标定。该系统的时间分辨力达到6.5ps,非线性为2.60%,可测量的时间范围从十几皮秒到几十纳秒。测量了若丹明6G和香豆素314两种标准荧光染料的荧光寿命,取得了与参考文献一致的实验结果。     

Investigation of the near-threshold cluster resonance in ~(14)C

An experiment for p(~(14)C,~(14)C~*→~(10)Be+α)p inelastic excitation and decay was performed in inverse kinematics at a beam energy of 25.3 Me V/u.A series of~(14)C excited states,including a new one at 18.3(1)Me V,were observed which decay to various states of the final nucleus of~(10)Be.A specially designed telescope system,installed around zero degrees,played an essential role in detecting the resonant states near theα-separation threshold.A state at 14.1(1)Me V is clearly identified,being consistent with the predicted band-head of the molecular rotational band characterized by theπ-bond linear chain configuration.Further clarification of the properties of this exotic state is suggested by using appropriate reaction tools.     

Ag-mediated charge transfer from electron-doped SrTiO3 to CO and NO: A first-principles study

Ag-mediated charge transfer from electron-doped SrTiO₃ to molecules CO and NO has been studied through the first-principles calculations based on density functional theory (DFT). Evaluation of Fukui functions indicates that Ag atom on SrTiO₃ (001) surface is presented as an active reduction and oxidation site. It shows that Ag prefers to mediate the charge transfer from electronically excited SrTiO₃ to target species. It illustrates that electron initially transfers from electron-doped SrTiO₃ to Ag, i.e., Ag is negatively charged. Interfacial charge transfer induces dipole moment and changes the surface work function. SrO-termination of SrTiO₃ (001) surface has weak activity to CO and NO while CO and NO can be strongly adsorbed on the negatively charged Ag atom. Negatively charged Ag donates its charge to the molecules. Charge occupies the molecule π_2p* orbital, which is responsible for the activation of the molecular bonds. Evidence that deposited metals on photocatalyst surface can efficiently separate the photogenerated electron-hole pairs has been addressed in this study.     

GaAs光电阴极激活时Cs的吸附效率研究

从NEA GaAs光电阴极的激活光电流曲线发现,当系统真空度不很高时,在首次Cs激活阶段,表面掺杂浓度较低的阴极材料,其光电流产生需要的时间也较长.同时,随着系统真空度的提高,这种时间上的差异又变得不再明显.该现象表明,Cs原子在阴极表面的吸附效率同表面层掺杂浓度以及系统真空度之间有直接的联系.为定量分析这种关系,本文根据实验数据建立了Cs在阴极表面吸附效率的数学模型,利用该模型仿真的结果同实验现象非常符合.该研究对进一步开展变掺杂阴极结构设计和制备工艺研究具有重要的价值和意义. 关键词： GaAs光电阴极 吸附效率 真空度 表面掺杂浓度