Study of asymmetric charge writing on Pb(Zr,Ti)O3 thin films by Kelvin probe force microscopy

Polycrystalline Pb(Zr_0.55Ti_0.45)O₃ thin film was deposited on Pt/Ti/SiO₂/Si(1 0 0) by radio-frequency-magnetron sputtering method, and the writing of charge bits on the surface of PZT thin film was studied by Kelvin probe force microscopy. It is found that the surface potential of the negative charge bits are higher than those of the corresponding positive ones. When ferroelectric polarization switching occurs, the potential difference becomes even more remarkable. A qualitative model was proposed to explain the origin of the asymmetric charge writing. It is demonstrated that the internal field in the interface layer, which is near the ferroelectric/electrode interface in ferroelectric film, is likely to be the cause for the occurrence of this phenomenon.     

一类含参广义集值拟变分包含组的解的灵敏性分析

本文引入了一类新的含参广义集值拟变分包含组,应用隐预解算子技巧,建立了该类变分包含组与一类不动点问题的等价性,在适当的条件下,分析了含参广义集值拟变分包含组的解的灵敏性,所得结果推广改进了最新文献中的许多结果．     

Using multi-exposure of color fringes to measure the beating motion of a moth

A multi-exposure of color fringes method has been developed to improve the capture speed of a conventional color CCD camera. In the method, four groups of projected fringe patterns encoded with different colors and different directions are stored in one CCD frame. Therefore the capture frequency of the conventional CCD can be improved to 200 Hz. It is available to measure the insect wings with low beating frequency, such as dragonfly, moth, or butterfly, whose beating frequency is about 30–40 Hz. We have used the method to measure the beating motion of a moth successfully.     

O在Au(111)表面吸附的密度泛函理论研究

应用密度泛函理论，本文系统地研究了O在Au(111)表面上的吸附能、吸附结构、功函数、电子密度和投影态密度，给出了覆盖度从0.11ML到1.0ML的范围内，O的吸附特性随覆盖度变化的规律.研究发现O的稳定吸附位为3重面心立方(fcc)洞位，O在fcc洞位的吸附能对覆盖度比较敏感，其值随着覆盖度的增加而减小；O诱导Au(111)表面功函数的变化量与覆盖度成近线性关系，原因是Au表面电子向O偏移，形成表面偶极子；O—Au的相互作用形成成键态和反键态，且反键态都被占据，造成O—Au键很弱，O吸附能较小. 关键词： 表面吸附 Au(111)表面 密度泛函理论 电子特性     

Commuting and stable feedback design for switched linear systems

In the paper, commuting and stable feedback design for switched linear systems is investigated. This problem is formulated as to build up suitable state feedback controller for each subsystem such that the closed-loop systems are not only asymptotically stable but also commuting each other. A new concept, common admissible eigenvector set (CAES), is introduced to establish necessary/sufficient conditions for commuting and stable feedback controllers. For second-order systems, a necessary and sufficient condition is established. Moreover, a parametrization of the CAES is also obtained. The motivation comes from stabilization of switched linear systems which consist of a family of LTI systems and a switching law specifying the switching between them, where if all the subsystems are stable and commuting each other, then the total system is stable under arbitrary switching.     

两种方法制备ITO薄膜的红外特性分析

比较了用电束加热蒸发法和直流磁控溅射法制备的氧化锡铟(ITO)薄膜在红外波段的光学特性实验发现,通过直流磁控溅射在常温下制备的ITO薄膜在红外波段折射率稳定、消光系数小,比电子束加热蒸发制备的膜有较高的透过率在波长1550nm附近的透过率可达86%以上,消光系数约为004,方电阻最低为100Ω/□.     

Algorithms for flattened Gaussian beams passing through apertured and unapertured paraxial ABCD optical systems

The propagation property of flattened Gaussian beams (FGBs) is studied based on the Collins formula, and analytical propagation equations for FGBs with and without an aperture are derived. It is shown that the closed-form expressions for the FGB of order N passing through paraxial ABCD optical systems without an aperture can be written as the combinations of Confluent Hyper-geometric Functions, and that the analytical equations for the FGB of order N passing through apertured paraxial ABCD optical systems may involve Error Functions. The proposed algorithms for the considered beams can save computing time, provide intuitive physical insights, and help to design optical systems. Our results are confirmed and illustrated with numerical examples.     

Convergence analysis of a modified inexact implicit method for general mixed monotone variational inequalities

We consider a useful modification of the inexact implicit method with a variable parameter in Wang et al. J Optim Theory 111: 431–443 (2001) for generalized mixed monotone variational inequalities. One of the contributions of the proposed method in this paper is that the restrictions imposed on the variable parameter are weaker than the ones in Wang et al. J Optim Theory 111: 431–443 (2001). Another contribution is that we establish a sufficient and necessary condition for the convergence of the proposed method to a solution of the general mixed monotone variational inequality.     

一个线性约束优化问题的广义梯度投影法

本文对线性约束优化问题提出了一个新的广义梯度投影法，该算法采用了非精确线性搜索，并在每次迭代运算中结合了广义投影矩阵和变尺度方法的思想确定其搜索方向．在通常的假设条件下，证明了该算法的整体收敛性和超线性收敛速度．     

Electrical properties of neodymium doped CaBi4Ti4O15 ceramics

Neodymium doped bismuth layer structure ferroelectrics (BLSFs) ceramics CaBi_4−xNd_xTi₄O₁₅ (x=0, 0.25, 0.50, 0.75) were prepared by solid-state reaction method. X-ray diffraction pattern showed that single phase was formed when x=0-0.75. The refined lattice parameters showed that a (b) axes decrease at x=0.25 and increase with more Nd³⁺ dopant. The effects of Nd³⁺ doping on the dielectric and ferroelectric properties of CaBi₄Ti₄O₁₅ ceramics are studied. Nd³⁺ dopant decreased the Curie temperature linearly, and the dielectric loss, tan δ, as well. The remnant polarization of Nd³⁺ doped CaBi₄Ti₄O₁₅ ceramics was increased by 80% at x=0.25, while more Nd³⁺ dopant decreased the remnant polarization. CaBi_3.75Nd_0.25Ti₄O₁₅ ceramics had the largest piezoelectric constant d₃₃. The structure and properties of CaBi_4−xNd_xTi₄O₁₅ ceramics showed that Nd³⁺ may occupy different crystal locations when Nd³⁺ content x is less than 0.25 and more than 0.50.