Spectrophotometric determination of microamounts of scandium with o-chlorophenylfluorone and cetyltrimethylammonium bromide

The reaction of scandium(III) with o-chlorophenylfluorone (o-CIPF) in the presence of cetyltrimethylammonium bromide (CTMAB) has been studied. In an acetate buffer at pH 4.4, a red-purple complex is obtained, with maximum absorption at 569 nm and a molar absorptivity of 1.31 x 10(5)1.mole(-1).cm(-1). The composition of the complex is found to be 1:2:2 Sc-o-CIPF-CTMAB. Beer's law is obeyed over the range 0-12 mug/25 ml scandium. The proposed method has been used for determination of trace scandium in tungsten ores after its prior separation by solvent extraction.     

催化动力学光度法测定痕量锆

研究了在弱酸性介质中，锆（Ⅳ）催化过氧化氢氧化铬蓝黑Ｒ这一新的指示反应及其动力学条件，建立了一种高灵敏、高选择性测定痕量锆的新方法，方法检出限为３．７４×１０－１１ｇ／ｍＬ，线性范围０～１．１μｇ／２５ｍＬＺｒ（Ⅳ）．用于合金钢中痕量锆的测定，结果满意．     

Zn—TppS4极谱络合物吸附波的研究：中草药天麻,川芎,当归中锌的测定

锌是人体必需的微量元素之一。它具有重要的生理功能和营养作用,是合成脱氧核糖核酸(DNA),核糖核酸(RNA)和蛋白质必需的金属离子。锌是DNA,RNA聚合酶等80多种酶的组成成分及激剂,直接影响细胞代谢,免疫过程,细胞分裂和再生。最近美国有人提出缺     

羟基羧酸钛(Ⅲ)配合物的合成和热性质研究

三氯化钛分别与苹果酸铵、酒石酸铵和柠檬酸铵反应，制得三种新的固态配合物：苹果酸羟基钛(Ⅲ)、酒石酸羟基钛(Ⅲ)和柠檬酸钛(Ⅲ)(化学式分别为Ti(OH)(C₄H₄O₅)·1.5H₂O、Ti(OH)(C₄H₄O₆)·1.5H₂O和Ti(C₆H₅O₇)·1.5H     

A new method for inversion of hydroxyl group of carbocyclic nucleosides

The hydroxyl group of carbocyclic nucleosides was inversed when the compounds were treated with Me_3SiCl,KCN and a catalytic amount of NaI in DMF/CH_3CN.     

氧化藏红T褪色催化荧光法测定痕量钒

研究了在酸性介质中柠檬酸存在下，痕量钒（Ｖ）催化溴酸钾氧化藏红Ｔ的褪色反应及其动力学条件，建立了催化荧光测定痕量钒的新方法。催化反应在沸水浴中进行８ｍｉｎ，为假零级反应，反应的表观活化能力为９９．２１ｋＪ／ｍｏｌ，反应速度常数为０．１２／ｓ；该方法的检出限为２．２×１０＾－８ｇ／Ｌ；线性范围为０．２￣２．４μｇ／Ｌ研究了共存离子的影响，用于人发和煤灰中痕量钒的测定，结果令人满意。     

Sequential Injection Photometric Determination of Molybdenum Using Organic Wetting Film Extraction

Wetting film extraction was combined with colorimetry to determine nanogram amounts of molybdenum(VI). The simple extraction procedure enhanced sensitivity and selectivity while maintaining a high sample throughput. Extraction and back extraction steps were exploited to exclude interference from the 31 metal species and 11 anions tested. In the first step, molybdenum(VI) was extracted into a toluene film as an ion paired complex. Molybdenum(VI) reacted with thiocyanate to form anionic molybdenum(V) and/or molybdenum(VI) thiocyanate complexes. The complexes were extracted into a toluene film containing tetraheptylammonium bromide as ion pairing reagent. The thiocyanate ligands were displaced by 1,5-diphenylcarbazone (DPC) to form a more intensely colored complex (λ_max= 540 nm). DPC was introduced in the back extraction solvent, methanol. The relative standard deviation was 2.5% for 50 ng ml⁻¹of molybdenum(VI) (n= 10) at a rate of 25 samples h⁻¹. The detection limit (3 × baseline noise) was 2.5 × 10⁻⁸M.     

The pH-dependent role of superoxide in riboflavin-catalyzed photooxidation of 8-oxo-7,8-dihydroguanosine

[reaction: see text]. The riboflavin-catalyzed photooxidation of 2',3',5'-tri-O-acetyl-8-oxo-7,8-dihydroguanosine generates a radical intermediate that is competitively trapped by H(2)O, O2(-)(*), or O(2). The products of H(2)O trapping have been previously described as the spiroiminodihydantoin (pH >or= 7) and iminoallantoin/guanidinohydantoin (pH < 7) nucleosides. Trapping by O2(-)(*) leads to the oxaluric acid (pH or= 8.6) pathways (R' ', R' ' = H or 2,3,5-tri-O-Ac-ribofuranosyl). The pH-dependent role of superoxide was probed using Mn-SOD and compared to guanosine and 8-methoxyguanosine photooxidation.     

The research on the high quality TiO2, MoO3-doped WO3 electrochromic film

The high quality TiO2, MoO3-doped WO3 electrochromic film was prepared by the sol–gel method for the first time. The sol, which has hydrogen peroxide (H2O2) and oxalic acid (H2C2O4), was very stable at room temperature and quite suitable for the deposition of films. The WO3 electrochromic film prepared from this doped sol had excellent performance, such as short response time, no cracks, good adhesion to the substrate, high coloring efficiency and longevity of service.