Investigation of the near-threshold cluster resonance in ~(14)C

An experiment for p(~(14)C,~(14)C~*→~(10)Be+α)p inelastic excitation and decay was performed in inverse kinematics at a beam energy of 25.3 Me V/u.A series of~(14)C excited states,including a new one at 18.3(1)Me V,were observed which decay to various states of the final nucleus of~(10)Be.A specially designed telescope system,installed around zero degrees,played an essential role in detecting the resonant states near theα-separation threshold.A state at 14.1(1)Me V is clearly identified,being consistent with the predicted band-head of the molecular rotational band characterized by theπ-bond linear chain configuration.Further clarification of the properties of this exotic state is suggested by using appropriate reaction tools.     

少周期激光脉冲附加太赫兹场对高次谐波发射的影响

本文通过数值求解非伯恩奥本海默近似下电子一维核一维的含时薛定谔方程,研究了少周期线偏振激光与氢分子离子相互作用下,太赫兹场的加入对高次谐波的发射影响.我们发现,在短周期线偏振激光脉冲的y方向上附加一个强度较弱的太赫兹场可以有效地扩展谐波的截止位置,并对量子轨道实现调控.通过时频分析、电子波包随时间变化以及半经典三步模型研究了高次谐波发射的物理机制,并对获得的物理现象给出合理的解释.     

石墨烯碳纳米管复合结构渗透特性的分子动力学研究

采用经典分子动力学方法研究了压力驱动作用下水在石墨烯碳纳米管复合结构中的渗透特性.研究结果表明,水分子渗透通过石墨烯碳纳米管复合结构的渗透率明显高于石墨烯碳纳米管组合结构.水在石墨烯碳纳米管复合结构中的渗透率随着压强的升高而增大,随着电场强度的增大而减小.考虑了温度和复合结构中双碳管轴心距对水渗透性的影响规律.系统温度越高,水的渗透率越高;随着双碳管轴心距的增加,水的渗透率逐渐降低.通过计算分析水流沿渗透方向的能障分布,解释了各参数变化对水在石墨烯碳管复合结构中渗透特性的影响机理.研究结果将为基于石墨烯碳管复合结构的新型纳米水泵设计提供一定的理论依据.     

超混沌分数阶Lü系统电路实验与追踪控制

对提出的新型超混沌Lü系统,研究了其分数阶混沌系统,通过数值仿真和电路实验,证实了分数阶超混沌Lü系统的混沌行为.利用分数阶系统稳定性理论,设计简单的线性反馈控制器,成功地实现了分数阶超混沌Lü系统的所有状态向量与正弦信号和任意不动点的追踪控制.仿真结果表明了该方法的有效性. 关键词： 分数阶Lü系统 超混沌系统 电路实验 追踪控制     

First Study of Weak (EC+β+) Decay Branch for the Neutron-Deficient Isotoep 209Fr

²⁰⁹Fr has been produced by irradiation of ¹⁹⁷Au with ¹⁶O from SFC accelarator uia the fusion-evaporation 4n channel.The(EC+β⁺)decay of ²⁰⁹Fr has been studied by a He-jet tape transport system.The decay scheme is proposed for the first time based on γ-t,X-γ-t,γ-γ-t coincidece and γ-γ delay coincidence measurements,which takes account of 20 observed γ ray.Five members of low-lying states in ²⁰⁹Rn can be explained by the multi-plet [(²¹⁰Rn2⁺)(νf_5/2)^－1].The branching ratio for(EC+β⁺) decay of ²⁰⁹Fr has been estimated experimentaly to be(3.0±1.5)%.     

皮疹病人血清的表面增强拉曼光谱

研究了皮疹患者和健康人血清的表面增强拉曼光谱。结果表明： 皮疹患者血清中蛋白质主链酰胺Ⅰ的谱线出现在1 648 cm-1处,而在健康人血清中此峰消失。蛋白质侧链C—S键扭曲构象的谱线637 cm-1的相对强度增加了23%,而反式构象的谱线725 cm-1的相对强度减少了60%,说明C—S键的反式构象部分转成扭曲构象,表明皮疹患者血清中蛋白质的有序结构发生变化。类脂物特征峰1 449 cm-1的相对强度增加了近一倍,D-甘露糖的谱线1 099 cm-1消失,表明患者血清中糖蛋白、糖质发生了变化。这些拉曼特征峰为皮疹的诊断以及生化机理研究提供了有力的实验依据。最后用主成分分析(PCA)方法对健康人和皮疹患者血清的表面增强拉曼光谱进行分析,发现皮疹患者血清的主成分分布相对健康人较分散,并且此方法能准确的区分开这２种血清。     

Improved performance of TiO2 electrodes coated with NiO by magnetron sputtering for dye-sensitized solar cells

TiO₂ electrodes are coated with NiO by DC magnetron sputtering, and their structural, optical and electrochemical performance has been investigated. X-ray diffractometry (XRD), UV-vis spectrophotometry, scanning electron microscopy (SEM), AC impedance, and linear sweep voltammetry (LSV) are used to characterize the TiO₂/NiO electrodes. Their performance is evaluated with a computer controlled electrochemical workstation in combination with three conventional electrodes. The experimental results indicate that the surface modification of TiO₂ electrodes with sputtered NiO reduces trap sites on TiO₂ and improves the electrochemical performance of dye-sensitized solar cells (DSSCs). Sputtering NiO for 7 min, which is about 21 nm thick, on 6.5 μm thick TiO₂ greatly improves the DSSC parameters, and the conversion efficiency increases from 3.21 to 4.16%. Mechanisms of the influence of the NiO coating on electrochemical performance are discussed.     

ps-laser scribing of CIGS films at different wavelengths

Continuous growth of the thin-film electronics market stimulates the development of versatile technologies for large-scale patterning of thin-film materials on rigid and flexible substrates, and laser technologies are a promising method to accomplish the scribing processes. Lasers with picosecond pulse duration were applied in scribing of complex multilayered CuIn _x Ga_(1−x)Se₂ (CIGS) solar cells deposited on a polyimide substrate. The ablative properties of the films were examined as a function of the wavelength of laser radiation, pulse energy, and the irradiation dose. The selective removal of ITO and CIGS layers was achieved with 355 nm irradiation without any significant damage to the underlying layers in the ITO/CIGS/Mo/PI solar cell system. The 355 nm wavelength was also found to be favorable for scribing of absorber layer in a ZnO/CIGS/Mo/PI solar cell system. 266 nm radiation significantly modified the film structure due to high absorption. Extensive melt formation in the CIGS layer was found when 532 nm radiation was applied, though the trenches were smooth and crack-free.     

壳聚糖辐射裂解制备基因载体及其体外转染性能研究

Chitosan (CS) is expected to be an ideal gene carrier for its high biosafety. In this work, CS with low molecular weight were prepared through the γ-ray radiation on the acetic acid solution of CS. The CS chains were scissioned under the γ-ray radiation, and the molecular weight (MW) of CS decreased with the absorbed dose. When the absorbed dose was above 30 kGy, the molecular weight of CS decreased about an order of magnitude. The γ-ray-radiation-scissioned CS can e ectively bind with plasmid (pEGFP) through complex coacervation method, forming pEGFP/ γ-ray-radiation-scissioned CS complex particles with a size of 200-300 nm. The complex particles have good stability and little cytotoxicity. The in uitro gene transfection efficiencies of the pEGFP/ γ-ray-radiation-scissioned CS complex particles were investigated by fluorescence microscope and flow cytometry. The results showed that the gene vectors using γ-ray-radiation-scissioned CS as the carrier will possess better gene transfection efficiency than those using natural high-MW CS as the carrier. The higher the absorbed dose, the smaller the MW of CS and the better transfection efficiency of the corresponding gene vector. This work provides a green and simple method on the preparation of CS-based gene vectors with high efficiency and biosafety.