Ionic liquid-based electrolyte with dual-functional LiDFOB additive toward high-performance LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> batteries

Manganese oxide-based cathodes are one of the most promising lithium-ion battery (LIB) cathode materials due to their cost-effectiveness, high discharge voltage plateau (above 4.0 V vs. Li/Li⁺), superior rate capability, and environmental benignity. However, these batteries using conventional LiPF₆-based electrolytes suffer from Mn dissolution and poor cyclic capability at elevated temperature. In this paper, the ionic liquid (IL)-based electrolytes, consisting of 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfon)imidate (PYR_1,4-TFSI), propylene carbonate (PC), lithium bis(trifluoromethanesulfon)imide (LiTFSI), and lithium oxalyldifluoroborate (LiDFOB) additive, were explored for improving the high temperature performance of the LiMn₂O₄ batteries. It was demonstrated that LiTFSI-ILs/PC electrolyte associated with LiDFOB addition possessed less Mn dissolution and Al corrosion at the elevated temperature in LiMn₂O₄/Li batteries. Cyclic voltammetry and electrochemical impedance spectroscopy implied that this kind of electrolyte also contributed to the formation of a highly stable solid electrolyte interface (SEI), which was in accordance with the polarization measurement and the Li deposition morphology of the symmetric lithium metal cell, thus beneficial for improving the cycling performance of the LiMn₂O₄ batteries at the elevated temperature. Cyclic voltammetry and electrochemical impedance spectroscopy implied that the cells using this kind of electrolyte exhibited better interfacial stability, which was further verified by the polarization measurement and the Li deposition morphology of the symmetric lithium metal cell, thus beneficial for improving the cycling performance of the LiMn₂O₄ batteries at the elevated temperature. These unique characteristics would endow this kind of electrolyte a very promising candidate for the manganese oxide-based batteries.     

Effects of different precipitants on LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> for lithium ion batteries prepared by modified co-precipitation method

Effects of two different precipitants of Na₂CO₃ and Na₂C₂O₄ on LiNi_0.5Mn_1.5O₄ (LNMO) cathode materials, which are prepared by a modified co-precipitation method, have been investigated. Various measurements have been applied to characterize the physical and electrochemical performances of LNMO. Compared with the LNMO prepared by the oxalate co-precipitation (LNMO2), the material synthesized by the carbonate co-precipitation (LNMO1) not only shows more uniform porosity and smaller particles but also has a better rate capability and cycling performance. In addition, the sample prepared by carbonate has a stable spherical structure, due to the fact that carbonate co-precipitation with less gas release during calcination can prevent the destruction of the as-prepared LNMO material structure and promote the formation of regular particle and aperture. Based on the electrochemical test results, LNMO1 shows greatly enhanced electrochemical performance of a high initial discharge capacity of 125.6 mAh g^?1 at 0.25 °C, as well as a preferably capacity retention of 96.5% after 100 cycles at 0.5 °C. And even at a high rate of 10 °C, the discharge capacity of LNMO1-based cell still approaches 83.1 mAh g^?1.     

Bistatic scattering by arbitrarily shaped objects with rough surface at optical and infrared frequencies

The scattering cross sections for arbitrarily shaped dielectric objects with rough surface are determined for optical and infrared frequencies using the Kirchhoff approximation. The formula of the coherent scattering cross section is derived, and numerical method of incoherent scattering cross section is given. As a specific example, the infrared laser scattering cross sections of rough spheres are calculated at 1.06 m.     

腔靶转换区辐射温度测量及定标关系

对近年来的激光腔靶实验的辐射温度作了综合分析和研究。对多种不同类型的柱型腔靶,在波长1.06μm的各种激光条件(不同的能量和脉宽)下,测量了腔靶转换区的辐射温度,并研究了辐射温度作为入腔激光能量、脉宽及腔靶转换区内表面积函数的定标关系。     

高压合成立方氮化硼的振动光谱

 本文利用FT-IR和Raman光谱对用不同触媒高压合成的不同颜色立方氮化硼晶格振动的声子吸收和散射进行了研究。获得了较完整的晶格振动信息，并在1 000~1 300 cm^-1范围内，观测到了3个新的振动谱带，其中一个位于1 089 cm^-1， 归属为体TO声子和表面TO声子组合带，另两条513、801 cm^-1推测为杂质诱发吸收带。     

大电流碳纳米管场发射阴极研究

报道了在较大发射面积上获得较大场发射电流的碳纳米管场发射阴极。为了加强场发射电流,在丝网印刷浆料中增加一种金属纳米颗粒,金属颗粒增强了碳纳米管发射体和衬底的接触,提高碳纳米管和衬底的粘附作用。利用改进后的丝网印刷方法制备了大电流碳纳米管场发射阴极,测得最大发射电流为68.0 mA,阴极有效发射面积约1.1 mm2,发射电流密度约6.2 A/cm2;并成功将改进方法制备的大电流场发射碳纳米管阴极应用于场发射真空器件原型。实验证明这种具有较大发射电流和较大发射电流密度的场发射能够满足部分大功率电子器件的需求。收稿日期:; 修订日期:     

太赫兹波导滤波器的分析与设计

分析了不同宽边情况下对滤波器加工精度的影响,分析结果表明对于不同频段的滤波器,需要选择合适的谐振腔的宽边才能达到较好的性能,同时分析了不同谐振模式的滤波器对加工精度的影响,分析表明,对于太赫兹频段滤波器,选用TE101谐振模式时存在腔体长度会比波导的宽边小很多的情况,而选用高阶谐振模式不但可以提高滤波器的品质因数Q值,减少损耗,同时也能在一定程度上降低滤波器对加工精度的要求。最后以0.34 THz 4阶带通滤波器为例验证此方法的正确性,测试表明该滤波器最低损耗为-0.73 dB,在0.335~0.349 THz范围内损耗在-2 dB以内。     

宽波段连续调谐全固态CW PPMgLN光学参量振荡器

利用半导体激光泵浦输出1064 nm波长的全固态连续Nd:YVO4激光器作为泵浦源,采用周期调谐和温度调谐组合调谐技术,对基于掺氧化镁周期性极化铌酸锂晶体（MgO:LiNbO3, PPMgLN）准相位匹配（QPM）的全固态连续波（CW）光学参量振荡器（OPO）宽波段无分立连续调谐输出特性进行研究。实验采用连续工作模式和外腔结构,基于多周期PPMgLN晶体的30.2,30.4和30.6 m周期,在改变晶体的极化周期的基础上,同时在30～100 ℃范围内调节晶体工作温度。实验结果表明:CW PPMgLN OPO的泵浦阈值仅为0.22 W;不同极化周期需要的温度调谐范围不同;信号光在1 559.8～1 597.2 nm近红外波段和闲频光在3 187.3~3 347.3 nm中红外波段连续调谐输出。实现了外腔式全固态CW OPO在信号光和闲频光波段的无分立连续调谐输出。     

Analysis of the mechanisms of electron recombination in HgCdTe infrared photodiode

This paper presents an experimental study of minority carrier lifetime and recombination mechanisms in HgCdTe photodiode. The excitation light source is a wavelength-tunable pulsed infrared laser. A constant background illumination has been introduced to minimize the effect of the junction equivalent capacitor and resistance. The decay of the photo-generated voltage is recorded by a storage oscilloscope. By fitting the exponentially decay curve, the time constant has been obtained which is regarded as the photo-generated minority carrier lifetime of the HgCdTe photodiode. The experimental results show that the carrier lifetime is in the range of 18–407 ns at 77 K for the measured detectors of four Cd compositions. It was found that the Auger recombination process is more effective for low Cd composition while the radiative recombination process became more important for high composition materials. The Shockley–Read–Hall recombination processes could not be ignored for all Cd composition.     

基于无模型方法的混沌系统自适应控制

传统的混沌控制方法大多需要获知混沌系统的模型知识, 但是工业实际中系统的参数经常是未知的,与此同时系统建模过程当中经常会不可避免地存在未建模的动态不确定性, 这种情况下常规的混沌控制方法不能取得优化的控制性能指标．为解决此问题, 提出了一类基于无模型方法的混沌系统自适应控制算法．该算法基于数据驱动, 无需混沌系统的先验知识, 无需训练过程, 在线调整参数较少, 是一种低成本的控制器．数学证明了该控制系统的稳定性, 仿真结果说明了这种理论的有效性． 关键词： 混沌控制 自适应 无模型 数据驱动