PLLA/β-TCP杂化微纳米纤维的制备及其性能

将湿法工艺合成的β-磷酸钙纳米粒子与左旋聚乳酸(PLLA)的混合溶液通过电纺丝法制成杂化纳米纤维膜,以期制备一种新型纳米纤维骨组织修复材料。采用FT-IR,XRD,TEM,DSC等手段研究了β-磷酸钙(β-TCP)的结构和形态,采用SEM和直径分布探讨了优化PLLA/β-TCP纤维的电纺丝工艺。结果表明:采用湿法合成β-TCP的纳米粒子具有良好的晶型结构,直径在219~328 nm之间;采用双溶剂体系在优化条件下制备的PLLA/β-TCP杂化纳米纤维直径在500~700 nm之间,PLLA/β-TCP界面结合良好,β-TCP起到了增强作用。在湿态条件下,PLLA纤维膜的力学性能有所提高,而PLLA/β-TCP纤维膜的力学性能则呈现下降趋势。     

电感耦合等离子体原子发射光谱专家系统中谱线激发模型

阐述了ＩＣＰ－ＡＥＳ专家系统中ＡＥＳ电离和激发模型的基本原理，研究了模拟中应用ｎｏｎ－ＬＴＥ理论的正确性以及所需的支持数据库。利用Ｂｏｌｔｚｍａｎｎ曲线，讨论了Ｂｏｌｔｚｍａｎｎ温度的测量值随能级激发能变化的现象，并与类似条件下的经验Ｂｏｌｔｚｍａｎｎ曲线进行对比，证明了专家系统中ＡＥＳ电脑和激发模型可靠性。     

New Dammarane Monodesmosides from the Acidic Deglycosylation of Notoginseng‐Leaf Saponins

Three new dammarane monodesmosides, named notoginsenosides Ft₁ ( 1 ), Ft₂ ( 2 ), and Ft₃ ( 3 ), together with three known ginsenosides, were obtained from a mild acidic hydrolysis of the saponins from notoginseng (Panax notoginseng (Burk .) F. H. Chen ) leaves. Their structures were elucidated to be (3β,12β,20R)‐12,20‐dihydroxydammar‐24‐en‐3‐yl O‐β‐D ‐xylopyranosyl‐(1 → 2)‐O‐β‐D ‐glucopyranosyl‐(1 → 2)‐β‐D ‐glucopyranoside ( 1 ), (3β,12β)‐12,20,25‐trihydroxydammaran‐3‐yl O‐β‐D ‐xylopyranosyl‐(1 → 2)‐O‐β‐D ‐glucopyranosyl‐(1 → 2)‐β‐D ‐glucopyranoside ( 2 ), and (3β,12β,24ξ)‐12,20,24‐trihydroxydammar‐25‐en‐3‐yl O‐β‐D ‐xylopyranosyl‐(1 → 2)‐O‐β‐D ‐glucopyranosyl‐(1 → 2)‐β‐D ‐glucopyranoside ( 3 ), by means of spectroscopic evidences. The known ginsenosides Rh₂ and Rg₃ 4 – 6 were obtained as the major products from this acidic deglycosylation.     

Studies on the Synthesis and Thermodynamic Stability of Two Multidentate Ligands 2,9-disubstituted 1,10-phenanthroline

Two multidentate ligands: N,N′-di-(propionic acid-2′-yl-)-2,9-di-aminomethylphenanthroline (L₁) and N,N′-di-(3′-methylbutyric acid-2′-yl-)-2,9-di-amino-methylphenanthroline (L₂) were synthesized and fully characterized by ¹H NMR and elemental analysis. The binding ability of L₁ and L₂ to metal ions such as M(II) (M = Cu, Zn, Co and Ni) and Ln(III) (Ln = La, Nd, Sm, Eu, and Gd) has been investigated by potentiometric titration in aqueous solution and 0.1 mol dm⁻³KNO₃ at 25.0 ± °C. In view of the structure of L₁ and L₂, mononuclear metal complexes can be formed in solution. The stability constants of binary complexes of ligands L1 and L2 with metal ions M(II) and Ln(III) have been determined respectively and further discussed.     

Syntheses,Characterization and Crystal Structures of Three Structurally Similar Dinuclear Schiff Base Cadmium(II) Complexes with Bridging Azide or Thiocyanate Ligands

Three novel Schiff base cadmium(II) complexes, derived from the end‐on (μ‐1,1‐N₃) azide or end‐to‐end (μ‐1,3‐NCS) thio cyanate bridges and similar tridentate Schiff base ligands, have been synthesized under similar synthetic procedures and their crystal structures determined by X‐ray diffraction methods. They are the dinuclear double end‐on azide‐bridged [Cd₂(L1)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 1 ), the dinuclear double end‐on azide‐bridged [Cd₂(L2)₂(N₃)₂(μ‐1,1‐N₃)₂] ( 2 ), and the dinuclear double end‐to‐end thiocyanate‐bridged [Cd₂(L3)₂(NCS)₂(μ_1,3‐NCS)₂] ( 3 ), where L1, L2 and L3 are three similar tridentate Schiff bases obtained by condensation of 2‐pyridylaldehyde with N,N‐diethylethane‐1,2‐diamine, of 2‐pyridylaldehyde with N‐isopropylethane‐1,2‐diamine, and of 2‐pyridylaldehyde with N,N‐dimethylpropane‐1,3‐diamine, respectively. Each cadmium(II) centre in the complexes is in a distorted octahedral coordination. There is a crystallographic inversion centre in each of the complexes. The similar small ligands used as the secondary ligands in the preparation of the cadmium(II) complexes with similar Schiff bases can result in similar structures.     

High extraction efficiency fiber coated with calix[4] open-chain crown ether for solid-phase microextraction of polar aromatic and aliphatic compounds

The calix[4] open-chain crown ether, 5,11,17,23-tetra-tert-butyl-25,27-di(2-allyloxyethoxyl)-26,28-dihydroxycalix[4]arene was synthesized and used for preparation of solid-phase microextraction (SPME) fibers of enhanced extraction efficiency. The new SPME coating made from calix[4] open-chain crown ether and hydroxyl-terminated silicone oil was developed with the aid of vinyltriethoxylsilane as bridge using sol-gel method and cross-linking technology. The efficiency of the novel fiber in the extraction of polar aromatic and aliphatic compounds, such as phenols, alcohols, and volatile fatty acids, was also investigated. Due to the introduction of the polar open-chain crown ether in calix[4]arene molecules, the calix[4] open-chain crown ether fiber showed much better selectivity and sensitivity to these polar compounds in comparison with calix[4]arene fiber. It also had superior extraction efficiency when compared to commercial poly(dimethylsiloxane)-divinylbenzene and polyacrylate fibers. Parts per billion to parts per trillion level detection limits were achieved for most of the analytes through SPME in conjunction with GC and flame ionization detector. The linear ranges were two to four orders of magnitude, and the RSD values were below 7% for all analytes. The novel fiber was applied to determine volatile alcohols and fatty acids in wine samples. The volatile-free wine prepared in this work was used to assure similar chemical environment for analytes in both calibration solutions and in real wine samples, thus compensating for possible matrix interferences. The established internal standard method using 4-methyl-2-pentanol as internal standard showed satisfactory accuracy and precision.     

Micropatterning of polymer thin films with pH-sensitive and cross-linkable hydrogen-bonded polyelectrolyte multilayers

Polyelectrolyte multilayers of poly(acrylic acid) (PAA) and polyacrylamide (PAAm) were prepared via hydrogen-bonding interactions. These multilayers as assembled were stable at low pH but dissolved quickly in neutral pH water. We developed methods for stabilizing these multilayers to high pH through cross-linking by heating or UV-irradiation. Thermal treatment of the multilayers, which resulted in a partial imidization between carboxylic acid and amide groups, gave the multilayer good stability at high pH. In addition, we introduced photoreactive groups in the multilayer, which rendered the film insoluble after UV irradiation. Using these selective stabilization approaches, we have succeeded in micropatterning these films by ink-jet printing and photolithography to create subtractive patterns.     

A coupled electron diffraction and rigid unit mode (RUM) study of the crystal chemistry of some zeotypic AlPO4 compounds

Electron diffraction and lattice dynamical calculations are used to investigate the unit cells, space group symmetries and inherent displacive flexibility of the room-temperature average structures of AlPO₄-8, AlPO₄-16 and AlPO₄-tridymite. The zero-frequency rigid unit modes (RUMs) of the idealized high-symmetry polymorphs thereof are also investigated along with their relationship to the lower-temperature polymorphism of these zeotypic aluminophosphates. The clear presence of satellite reflections in addition to the Bragg reflections (G) of the underlying Cmc2₁ parent structure in the case of AlPO₄-8 shows that the true unit cell of the room-temperature polymorph has a doubled c-axis due to a condensed RUM mode. Structured diffuse scattering is also observed which can be related to the thermal excitation of RUM modes. In the case of AlPO₄-tridymite, a complex F1 triclinic polymorph is observed and related to soft RUM modes while, in the case of AlPO₄-16, a soft q=0 RUM mode is shown to be responsible for an observed phase transition in the case of the all SiO₂ analogue of AlPO₄-16. A large number of additional zero-frequency RUM modes also exist in the case of AlPO₄-16.     

An Overview of Molecular Packing Mode in Two‐Dimensional Organic Nanomaterials via Supramolecular Assembly

Two‐dimensional (2D) organic nanomaterials are attracting increasing research interest and expected to be the ideal candidate for future‐ proofed flexible electronics and biotechnologies. Owing to the complex molecular structures and multiple intermolecular interactions in organic systems, deeper understanding of rational molecular design and assembly principles is urgently required. In this review, a collection of molecular packing mode in the 2D organic nanomaterials via supramolecular assembly is presented, so as to help explicit the relationship among molecular structures, supramolecular interactions and molecular packing motifs in 2D assembly systems. We also provide a rational and accessible schematic model to demonstrate several typical kinds of molecular packing motifs for the prediction of the 2D morphology.