A novel neutral receptor for selective recognition of H2PO 4 −

A new urea-based receptor was designed to selectively recognize H₂PO₄⁻ among other anions (such as F^-, Cl^-, Br^-, I^-, OH^-, AcO^-) in organic solvent (DMSO) through intermolecular hydrogen bonding. Addition of anions to the receptor caused changes in UV–vis spectrum which provided the first indication of its anion binding ability. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

3D－QSAR Study on Diindolylmethane and Its Analogues with Comparative Molecular Field Analysis(CoMFA)

Comparative molecular field analysis (CoMFA),a three dimensional quantitative structure-activity relationship (3D-QSAR) method was applied to a series of diindolylmethane(DIM) analogs to study the relationship between their structure and their induction of CYP 1A1-associated ethoxyresorufin-O-deethylase(EROD) activity.A DISCO model of pharmacophore was derved to guide the superposition of the compounds.The coefficient of cross-validation (q^2) and non cross-validation(r^2) for the model established by the study are 0.827 and 0.988 respectively,the value of variance ratio (F) is 103.53 and standard error estimate (SEE)is 0.044.These values indicate that the CoMFA model derived is significant and might have a good prediction for the catalytic activity of DIM compounds.As a consequence,the predicted activity values of new designed compounds were all higher than that of the reported value.     

A New Activation Method for Electroless Metal Plating：Palladium Laden via Bonding with Self—Assembly Monolayers

A new activation method has been developed for electroless copper plating on silicon wafer based on palladium chemisorption on SAMs of APTS without SnCl2 sensitization and roughening condition.A closely packed electroless copper film with strong adhesion is successfully formed by AFM observation.XPS study indicates that palladium chemisorption occurred via palladium chloride bonding to the pendant amino group of the SAMs.     

卫星用复合材料压力容器力学特性研究

为了研究航天复合材料压力容器内衬与复合材料双层壳体的力学特性,通过优化复合材料网格理论算法,针对钛合金内衬(TC4)/碳纤维(T1000GB)缠绕柱形复合材料压力容器进行了应力应变特性分析.以纤维预紧应力为自变量,研究其对内衬/纤维双层壳体在预紧压力、工作压力、验证压力和爆破压力下应力的影响,提出了优化设计的解析解法,...     

含多源损伤的胶接修补结构有限元分析方法

采用有限元法研究含多源损伤结构的胶接修补问题,利用二维三层有限元模型对损伤区进行了数值模拟,并选取典型多源损伤情况中含共线双裂纹铝板结构为算例,详细分析了含多裂纹胶接修补结构中两裂纹相对位置、补片尺寸、铺层和厚度对应力强度因子的影响.结果表明,复合材料胶接修补可明显降低含共线双裂纹母板的应力强度因子;对于确定的裂纹和应力场,应对复合材料补片长度和厚度等参数进行优化设计,以获得最佳的修补效果.     

锂二次电池中的原位聚合电解质

聚合物电解质主要分为凝胶聚合物电解质和固态聚合物电解质两种类型,均能够提升锂二次电池的性能.其中,凝胶聚合物电解质是利用增塑剂实现聚合物基质的凝胶化,将有机液态电解液固定在三维网络结构中,因此同时具备液态的离子扩散速率和固态材料的机械性能;而固态聚合物电解质是一种完全没有液态电解质的体系,利用聚合物基体的极性实现锂盐的...     

稀土钐离子可见荧光量子产率的精确测试与计算

采用积分球配以CCD光谱测试系统,在蓝色半导体发光二极管激发下,对Sm3 掺杂的低声子能量、高折射率铋碲酸盐玻璃的荧光光谱进行测试。实现了荧光发射特性绝对评价为目的的绝对光谱功率分布测定,为发光与激光材料荧光发射特性的精确测量与表征提供了一种准确方法。荧光测试系统由直径为25.4cm的积分球配以CCD探测器组成,通过标准卤素灯定标,辅助卤素灯校正积分球内环境变化,解析出样品的绝对光谱功率分布,并进一步计算出光量子数分布,求得荧光量子产率等荧光特征参量。测试与计算结果表明,对应可见区Sm3 四个特征发射峰,总荧光量子产率为7.55%。     

转移基板材质对Si衬底GaN基LED芯片性能的影响

在Si衬底上生长了GaN基LED外延材料,分别转移到新的硅基板和铜基板上,制备了垂直结构蓝光LED芯片。研究了这两种基板GaN基LED芯片的光电性能。在切割成单个芯片之前,对大量尺寸为(300μm×300μm)的这两种芯片分别通高达1 A的大电流在测试台上加速老化1 h。结果显示,铜基板Si衬底GaN基LED芯片有更大的饱和电流,光输出效率更高,工作电压随驱动电流的变化不大,光输出在老化过程中衰减更小。铜基板芯片比硅基板芯片可靠性更高,在大功率半导体照明器件中前景诱人。     

掺锗硅基高非线性光纤超连续光源研究

利用非线性偏振旋转锁模掺铒光纤激光器和1100m长的掺锗硅基高非线性光纤制作了超连续光源,获得了从1150～1750nm的超宽带输出光谱,其中1150～1350nm波段光谱起伏小于3dB,1600～1700nm波段平坦度优于1dB,并有很好的向长波延展空间。光谱展宽的机理为孤子分裂与受激拉曼散射,而四波混频使光谱进一步展宽。     

激光声源特性研究及海洋应用

激光声作为水下声源的一种新的激发方法,具有高声强、窄脉冲、宽频谱等优点。基于激光声激发的线性及非线性理论,建立了激光声信号特性的初步模型,研究了激光在水中激发声波的特性,研究表明：在热膨胀激发状态,增大激光光强可以提高激光声的转换效率;光强大于击穿阈值后,激光声的激发机制为非线性的光击穿机制。激光声具有的高距离分辨能力和海洋抗干扰能力,对水下目标探测、空载平台等领域有着较广的应用前景。